You can edit almost every page by Creating an account. Otherwise, see the FAQ.

Alexander Abugov

From EverybodyWiki Bios & Wiki

Alexander Abugov (Russian: Абугов Александр Лазаревич), born in 1962 in Minsk (Belarus, USSR), is Scientist, Engineer and Inventor.

After graduating from high school with Gold Medal he enrolled to machine building department of Belorussian Polytechnic Institute (now Belarusian National Technical University) which he graduated with Excellence ("red diploma") in 1984. While studying at the University he started his research in metalworking technology entering his PhD studies after graduation. He received his PhD in Mechanical Engineering (Russian: кандидат технических наук) from Belarusian National Technical University[1]. He is author of number of works in area of technology of machine building [2] specializing in surface finishing with needle milling (microscalping) and surface plastic deformation. He suggested concept of combining those technologies in one technological process.

He is author of number of USSR Author’s Certificates [3] and sign "Inventor of the USSR" was issued to him.

Being involved in inventor’s activity he studied TRIZ and other innovation methodologies. He received degree in Patent Studies (Patent Expert) from Russian State Academy of Intellectual Property (Moscow, Russia).

He also worked in in area of Total Quality Management (especially quality of technological and metrological support of production).

After immigration to the USA in 1996 he started working for software industry in Boston, MA and vicinity. He also graduated from Brandeis University with Master in Software Engineering. His current interests are in Software Quality and Scrum project framework. He is Certified ScrumMaster® and Certified Scrum Professional® from Scrum Alliance®.

Selected Works (Russian)[edit]

  1. Новое в технологии обработки деталей проволочным инструментом/ А. Л. Абугов, И. Л. Баршай.- Минск : БелНИИНТИ, 1990.- 48 c.
  2. Прогрессивная технология и оборудование для механической подготовки деталей под гальванические и лакокрасочные покрытия / А. Л. Абугов, И. Л. Баршай, Т. Б. Худолей/ Минск : БелНИИНТИ, 1989.- 36 c.

Selected Articles (Russian)[edit]

  1. Абугов А.Л. Иглофрезеровальные станки для обработки цилиндрических деталей// Станки и инструмент.- № 7.- 1990.- С.41-42.
  2. Абугов А.Л., Баршай И.Л., Фельдштейн Е.Э. Экспериментальное исследование динамики микрорезания при иглофрезеровании// Известия вузов. Машиностроение. -1987.-№8.-С.140-142.
  3. Абугов А.Л. Иглофрезерование заготовок методом врезания// Станки и инструмент.- № 1.- 1988.- С.34-35. (Abugov A.L. Plunge-feed needle milling// Soviet Engineering Research, Vol. 8, No. 1, p. 92 (Stanki i instrument, Vol. 59, No 1, pp.34-35).
  4. Абугов Л.Г., Абугов А.Л. Развертка с большим углом наклона зубьев// Станки и инструмент. - № 11.- 1985.- С.31-32.
  5. Абугов Л.Г., Абугов А.Л. Обработка отверстий фасонными осевыми резцами// Станки и инструмент. - №2.- 1984.- С.40-41.

References[edit]

  1. "Разработка комбинированного процесса отделочно-зачистной и упрочняющей обработки деталей иглофрезерованием и поверхностным пластическим деформированием". Unknown parameter |url-status= ignored (help)
  2. "Leibnitz Information Centre for Science and Technology". Unknown parameter |url-status= ignored (help)
  3. "European Patent Office". Unknown parameter |url-status= ignored (help)


This article "Alexander Abugov" is from Wikipedia. The list of its authors can be seen in its historical and/or the page Edithistory:Alexander Abugov. Articles copied from Draft Namespace on Wikipedia could be seen on the Draft Namespace of Wikipedia and not main one.