Dodocool WiFi repeater

🛑🚧🚧This page has been detected as SPAM and will be removed soon

To annihilate the Wi-Fi dead zone or mitigate buffering network the Dodocool WiFi repeater is an exquisite networking device. Because this extender amplifies your prevailing network signals. The high-speed of this WiFi range repeater/extender is 867Mbps for 5GHz and 300Mbps for 2.4GHz. In addition, the dual-band network offers a total WiFi transmission speed of up to 1167 Mbps. This network is consequential for gaming consoles, transferring long files, and video streaming. Moreover, the Dodocool WiFi range extender supports multi-connection modes such as repeater, AP, & router mode. In other words, it works with 802.11AC network standards that have a more robust WiFi connection and brisk signal strength. The backward compatibility is universal, as well, it works with 802.11n/g/b/a.

Furthermore, to get the brisk WiFi speed and robust coverage, the most prior step is to set up the Dodocool repeater. But the question occurs: how do i set up a dodocool wifi repeater? Well, we have got the answer! In this blog, we will orient the complete setup steps. Let’s go ahead with the Dodocool repeater setup.

Dodocool WiFi Repeater Setup

The setup of the Dodocool range extender is vital to amplify the WiFi signals. You can handily do the Dodocool WiFi range extender with the two modes:

Web-based setup
Dodocool extender setup with WPS

In the range extender web-based mode, You will need a login ip address or a default web address.

On the other hand, In the WPS(Wi-Fi Protected Setup) method, you will only need the WPS button and not any cord and internet browser. But for this, both the devices support the WPS button.

Let’s get to know how to set up dodocool wifi repeater in a quick way without any hassle.

Dodocool WiFi repeater setup steps with web browser

Follow the steps below to do the dodocool wifi extender setup by using the loghin IP address or local web address.

First of all, you have to relate the PC operating device to the repeater's network, for this you can put the Ethernet cord to the LAN jack.
As well, from the Wireless-N network, you can ingeniously relate your mobile/laptop to the Wi-Fi.
Now, you have to click on a browser(Updated) on your device and launch it.
Next, you have to click on the address bar and put down the ap.setup or 192.168.10.
When the login wizard pop-up, put down the username/password and log in.
The setup interface will scan the available network.
Henceforth, opt for a network that you want to boost and enroll at the password.
In the last steps, hit the Finish icon.

Dodocool WiFi range repeater with WPS method

Walk through the dodocool wifi repeater instructions mentioned below for doing the setup without WPS.

Initially, you have to remove the Dodocool repeater into the container box and probe the accessories. Prior to beginning the WPS setup, meticulously read the dodocool wifi repeater manual.
Thereafter, couple the WiFi repeater to the surge protector or Power Supply Unit.
Then, head over your Dodocool repeater and knob the power switch. You have to wait up until the LED light status is steady green.
Now, examine the WPS button on your repeater and then hold it for a jiffy.
As well, ascertain the WPS button on your prevailing network device and push it.
To establish the connection, you have to wait up until the WPS LED status is steady green.
When the WPS LED status is green, relocate your range repeater in other spots.

And that’s it! The Dodocool WiFi range repeater setup with two methods is successfully finished.

Configuration steps for Dodocool WiFi range repeater

The configuration is crucial for stable and amplifying the signals of your WiFi Range Repeater. Let us proceed with the configuration steps.

Firstly, you have to get the wifi repeater login and log in.
From the http: //ap.setup, you can quickly get the login interface, and then put down admin in the username/password sections.
On the setup interface of the repeater, you have to configure the different modes.
To view or change the default password, open the Wireless tab, and then view or change it.
To completely protect the Wi-Fi network, open the security encryption and then toggle the security.
To get a better internet experience, opt for other internet types.
To conclude the configuration, hit the Save icon.

Facing the Dodocool WIFi extender setup issue? Try these steps

When you set up the Dodocool range extender but you cope with some problems, then follow these steps.

Basically, you have to power cycle your dodocool wireless-n repeater. For that disjoin form power supply and join it back.
Next, ascertain the WPS button is properly pressed. If not, then you have to knob it for a few seconds.
Relocate the position of your Dodocool wifi range extender. The impeccable location of your extender is closer to the existing network.
Ensure your extender properly joins the Power Supply Unit. If not, then join it again.
In the web-based setup, double inspect the IP address or local web address that you used.
Eventually, perform a factory reset of your dodocool wifi booster.

Quick steps for Dodocool WiFi repeater Firmware update

To get the new feature and improve the network connectivity, check and upgrade the Dodocool wifi extender firmware.

First and foremost, you have to open the official website of your Dodocool repeater and search the firmware file.
After searching the file, you have to hit the Download tab.
When the firmware file is downloaded, visit the login admin panel with the ap.setup.
Next, open the Management setting and notice the Upgrade Firmware tab.
After opening the Firmware update page, detect and load the file in their tab.
You have to await till the file is completely loaded.
Hit the Upgrade icon.

Get the Dodocool WiFi extender reset steps

In order to perform the factory reset of your wireless-n WiFi repeater, check the given below steps.

Primarily, you have to merge the Dodocool wireless repeater to the AC joint or surge protector.
Next, hold the power switch up to when the power LED lit up.
Thereafter, you have to locate the small or tiny PIN.
Insert this Pin into the reset button for a jiffy.
After that, the Dodocool range repeater will reset and reboot.

Dodocool WiFi range repeater review

In my point of view, the Dodocool wifi repeater review is better and exceptional as compared to other extender brands reviews. It absolutely works with a 2.4GHz or 5GHz network that proffers brisk & ultrafast network range. As well, with a 2.4GHz network, you can reliably take an experiment of broadening network coverage. In addition, this extender supports one LAN and WAN port, so you can readily establish the connection. The design of the Dodocool WiFi extender is compact and sleek then you can strictly attach it to the Power Supply Unit(PSU). It supports three-in-one modes so you can reliably enjoy the wireless network and coverage.

As well, the dual-band external antenna improves the network connection. The setup of the Dodocool WIFi range repeater is not complex, by pressing the WPS button. Also, do the setup by using the web-based interface. Thus, the Dodocool WIFi range extender is an exquisite network device to robust & improve the connection.