Fly Castelluccio SMN
| SMN | |
|---|---|
| Role | |
| Manufacturer | Fly Castelluccio |
| Status | Production completed |
The Fly Castelluccio SMN is an Italian paramotor that was designed and produced by Fly Castelluccio of Ascoli Piceno for powered paragliding. Now out of production, when it was available the aircraft were supplied complete and ready-to-fly.[1]
Design and development
The SMN was designed to comply with the US FAR 103 Ultralight Vehicles rules as well as European regulations. It features a paraglider-style wing, single-place accommodation and a single Simonini Racing engine in pusher configuration powering a two-bladed 100 cm (39 in) wooden propeller through a reduction drive. The fuel tank capacity is 10 litres (2.2 imp gal; 2.6 US gal).[1]
As is the case with all paramotors, take-off and landing is accomplished by foot. Inflight steering is accomplished via handles that actuate the canopy brakes, creating roll and yaw.[1]
Specifications (SMN)
Data from Bertrand[1]
General characteristics
- Crew: one
- Empty weight: 20 kg (44 lb)
- Fuel capacity: 10 litres (2.2 imp gal; 2.6 US gal)
- Powerplant: 1 × Simonini Racing single cylinder, two-stroke, air-cooled aircraft engine, with a reduction drive
- Propellers: 2-bladed wooden, fixed pitch, 1.00 m (3 ft 3 in) diameter
References
Template:Fly Castelluccio aircraft
This article "Fly Castelluccio SMN" is from Wikipedia. The list of its authors can be seen in its historical and/or the page Edithistory:Fly Castelluccio SMN. Articles copied from Draft Namespace on Wikipedia could be seen on the Draft Namespace of Wikipedia and not main one.
