How to do Netgear EX6420 setup

The Netgear EX6420 setup extends the range of a WiFi network by amplifying the existing WiFi signal. It improves overall signal quality at long distances. Get the connectivity you need for desktop computers, cellphones, laptop computers, and other devices.

This product can function as both an extension and an access point. It is backwards compatible with all standard routers and gateways. Your EX6420 extender mimics WiFi router signals when in extension mode. When in access point mode, it creates a new Wifi Hotspot from a wired Ethernet connection. This product can be used for both a robust home WiFi system and at your office. The Ex 6420 incorporates Fastlane TM Technology as well as MU-MIMO.

Let's have a look at the Netgear AC1900 EX6420 configuration.

Netgear EX6420 setup with WPS button[edit]

Wi-Fi Protected Setup is supported by the Netgear ac1900 ex6420 extender (WPS). WPS allows you to connect your device to the Netgear Extender without having to enter the Network name and password.

This can be accomplished by following the very easy steps outlined below.

Press and hold the WPS button on the product until the WPS LED becomes green.
In the same manner, hit the WPS button on your previously configured router once more. The WPS LED on the extender turns solid green, as does the router Link LED, and the extender connects to your WiFi network. Unplug the Netgear ac1900 and place it halfway between your router and the location where your router's WiFi signal is weak.
Connect it to a power source and wait for the Power LED to become green.
Following that, you can use the Router Link LED to determine the best position.
If the Router Link LED does not illuminate, connect the extender to a power outlet closer to the router.
Connect your device to the WiFi network at this point.
Join the WiFi network with your device.

Netgear EX6420 setup By Netgear installation assistant[edit]

Netgear Installation Assistant makes it simple to set up a Netgear extension. This companion makes it easier for you to do tasks. To use this aid, go to mywifiext.net. or 192.168.1.250. Connect your device to the Extender through WiFi or wired Ethernet.
Join the Extender WiFiWiFi network NETGEAR EXT on your device.
Using Ethernet: Connect your Ethernet port with an Ethernet wire as well. Connect an Ethernet connection on the Extender to your WiFi-enabled computer.
Now, open any Web browser (Chrome or Firefox are preferred) and navigate to http://mywifiext.net.
The Router Link LED light blinks after the Netgear Ex6420 extender is configured. The Extender joins the router's WiFi network.
Unplug the Extender and relocate it. Which is approximately halfway between your router and the location with poor router WiFi signal.
Connect the Netgear AC1900 to a power outlet. Allow the Power LED to turn green.
Now, use the Router Link LED to determine the best position.
If the Router Link LED does not illuminate, connect the Netgear Extender to a power outlet closer to the router.

How to setup Netgear EX6420 as an access point[edit]

The Netgear Extender Ex6420 can be configured as a WiFi Access Point. It uses a Wired Ethernet Connection to generate a new WiFi Hotspot.
To begin, toggle the Access Point or Extender switch to the Access Point position.
Second, connect the Netgear Extender to a power outlet.
Following that, connect your device to the Netgear Extender through WiFi or wired Ethernet.
Join the Extender WiFi network NETGEAR EXT on your device.
Ethernet: You should also utilize an Ethernet cable. To connect your ex6420 Extender's Ethernet port to an Ethernet port on your WiFi-enabled computer.
Now open any Web browser. (We prefer using Chrome or Firefox.) Go to mywifiext.net and look for the NETGEAR installation assistant.
Return to the NETGEAR Extender installation assistant to complete the Netgear Extender access point setup.

If you are still unable to set up your Netgear WiFi Range Extender, contact the skilled specialists by dialing our toll free number or live chat.