You can edit almost every page by Creating an account. Otherwise, see the FAQ.

List of ASTM International standards (D)

From EverybodyWiki Bios & Wiki


This is a list of ASTM International standards for "Materials for Specific Applications".[1]

List[edit]

D1-D1000[edit]

  • D4 - 86(2018) Test Method for Bitumen Content
  • D5/D5M - 20 Test Method for Penetration of Bituminous Materials
  • D6/D6M - 95(2018) Test Method for Loss on Heating of Oil and Asphaltic Compounds
  • D8 - 20a Terminology Relating to Materials for Roads and Pavements
  • D9 - 20 Terminology Relating to Wood and Wood-Based Products
  • D16 - 19 Terminology for Paint, Related Coatings, Materials, and Applications
  • D20 - 20 Test Method for Distillation of Road Tars
  • D25 - 12(2017) Specification for Round Timber Piles
  • D34 - 08(2019) Guide for Chemical Analysis of White Pigments
  • D36/D36M - 14(2020) Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
  • D41/D41M - 11(2016) Specification for Asphalt Primer Used in Roofing, Dampproofing, and Waterproofing
  • D43/D43M - 00(2018) Specification for Coal Tar Primer Used in Roofing, Dampproofing, and Waterproofing
  • D49 - 83(2020) Test Methods of Chemical Analysis of Red Lead
  • D50 - 90(2019) Test Methods for Chemical Analysis of Yellow, Orange, Red, and Brown Pigments Containing Iron and Manganese
  • D56 - 16a Test Method for Flash Point by Tag Closed Cup Tester
  • D61 - 15(2019) Test Method for Softening Point of Pitches (Cube-in-Water Method)
  • D69 - 19 Test Methods for Friction Tapes
  • D70 - 18a Test Method for Density of Semi-Solid Asphalt Binder (Pycnometer Method)
  • D71 - 94(2019) Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)
  • D75/D75M - 19 Practice for Sampling Aggregates
  • D76/D76M - 11(2016) Specification for Tensile Testing Machines for Textiles
  • D79 - 86(2020) Specification for Zinc Oxide Pigments
  • D81 - 87(2020) Specification for Basic Carbonate White Lead Pigment
  • D83 - 84(2020) Specification for Red Lead Pigment
  • D85 - 05(2019) Specification for Ochre Pigment
  • D86 - 20b Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
  • D87 - 09(2018) Test Method for Melting Point of Petroleum Wax (Cooling Curve)
  • D88/D88M - 07(2019)e1 Test Method for Saybolt Viscosity
  • D91 - 02(2019) Test Method for Precipitation Number of Lubricating Oils
  • D92 - 18 Test Method for Flash and Fire Points by Cleveland Open Cup Tester
  • D93 - 20 Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
  • D94 - 07(2017) Test Methods for Saponification Number of Petroleum Products
  • D95 - 13(2018) Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
  • D97 - 17b Test Method for Pour Point of Petroleum Products
  • D98 - 15 Specification for Calcium Chloride
  • D113 - 17 Test Method for Ductility of Asphalt Materials
  • D115 - 17 Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation
  • D116 - 86(2020) Test Methods for Vitrified Ceramic Materials for Electrical Applications
  • D117 - 18 Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Liquids
  • D120 - 14a Specification for Rubber Insulating Gloves
  • D121 - 15 Terminology of Coal and Coke
  • D123 - 19 Terminology Relating to Textiles
  • D126 - 87(2019) Test Methods for Analysis of Yellow, Orange, and Green Pigments Containing Lead Chromate and Chromium Oxide Green
  • D127 - 19 Test Method for Drop Melting Point of Petroleum Wax, Including Petrolatum
  • D128 - 98(2019) Test Methods for Analysis of Lubricating Grease
  • D129 - 18 Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method)
  • D130 - 19 Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
  • D139 - 16 Test Method for Float Test for Bituminous Materials
  • D140/D140M - 16 Practice for Sampling Asphalt Materials
  • D143 - 14 Test Methods for Small Clear Specimens of Timber
  • D146/D146M - 04(2020) Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing
  • D149 - 20 Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
  • D150 - 18 Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
  • D153 - 84(2020) Test Methods for Specific Gravity of Pigments
  • D156 - 15 Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)
  • D167/D167M - 20 Test Method for Apparent and True Specific Gravity and Porosity of Lump Coke
  • D173/D173M - 03(2018) Specification for Bitumen-Saturated Cotton Fabrics Used in Roofing and Waterproofing
  • D178 - 19 Specification for Rubber Insulating Matting
  • D185 - 07(2019) Test Methods for Coarse Particles in Pigments
  • D187 - 18 Test Method for Burning Quality of Kerosene
  • D189 - 06(2019) Test Method for Conradson Carbon Residue of Petroleum Products
  • D197 - 19 Test Method for Sampling and Fineness Test of Pulverized Coal
  • D198 - 15 Test Methods of Static Tests of Lumber in Structural Sizes
  • D202 - 17 Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation
  • D204 - 02(2016) Test Methods for Sewing Threads
  • D209 - 81(2019) Specification for Lampblack Pigment
  • D210 - 05(2019) Specification for Bone Black Pigment
  • D211 - 67(2019) Specification for Chrome Yellow and Chrome Orange Pigments
  • D217 - 19b Test Methods for Cone Penetration of Lubricating Grease
  • D226/D226M - 17 Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing
  • D227/D227M - 03(2018) Specification for Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing
  • D228/D228M - 19a Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
  • D229 - 19e1 Test Methods for Rigid Sheet and Plate Materials Used for Electrical Insulation
  • D233 - 13(2017) Test Methods of Sampling and Testing Turpentine
  • D235 - 02(2012) Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent)
  • D240 - 19 Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
  • D242/D242M - 19 Specification for Mineral Filler for Asphalt Mixtures
  • D243/D243M - 20 Test Method for Residue of Specified Penetration
  • D244 - 09(2017) Test Methods and Practices for Emulsified Asphalts
  • D245 - 06(2019) Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber
  • D256 - 10(2018) Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
  • D257 - 14 Test Methods for DC Resistance or Conductance of Insulating Materials
  • D263 - 05(2019) Specification for Chrome Oxide Green Pigment
  • D267 - 82(2020) Specification for Gold Bronze Powder
  • D268 - 01(2012) Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material
  • D269 - 97(2020) Test Method for Insoluble Matter in Rosin and Rosin Derivatives
  • D276 - 12 Test Methods for Identification of Fibers in Textiles
  • D279 - 02(2019) Test Methods for Bleeding of Pigments
  • D280 - 01(2019) Test Methods for Hygroscopic Moisture (and Other Matter Volatile Under the Test Conditions) in Pigments
  • D281 - 12(2016) Test Method for Oil Absorption of Pigments by Spatula Rub-out
  • D283 - 13(2019) Test Methods for Chemical Analysis of Cuprous Oxide and Copper Pigments
  • D287 - 12b(2019) Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
  • D291/D291M - 20 Test Method for Bulk Density of Crushed Bituminous Coal
  • D293/D293M - 18 Test Method for the Sieve Analysis of Coke
  • D297 - 15(2019) Test Methods for Rubber Products—Chemical Analysis
  • D299/D299M - 04(2017) Specification for Asbestos Yarns
  • D304 - 11(2019) Specification for n-Butyl Alcohol (Butanol)
  • D305 - 84(2020) Test Method for Solvent-Extractable Material in Black Pigments
  • D312/D312M - 16a Specification for Asphalt Used in Roofing
  • D315/D315M - 95(2017) Specification for Woven Asbestos Tape
  • D322 - 97(2016) Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation
  • D323 - 20a Test Method for Vapor Pressure of Petroleum Products (Reid Method)
  • D329 - 07(2013) Specification for Acetone
  • D330 - 07(2013) Specification for 2-Butoxyethanol
  • D331 - 11(2019) Specification for 2-Ethoxyethanol,
  • D332 - 87(2020) Test Method for Relative Tinting Strength of White Pigments by Visual Observation
  • D333 - 01(2013) Guide for Clear and Pigmented Lacquers
  • D341 - 20e1 Practice for Viscosity-Temperature Equations and Charts for Liquid Petroleum or Hydrocarbon Products
  • D346/D346M - 11(2019)e1 Practice for Collection and Preparation of Coke Samples for Laboratory Analysis
  • D350 - 13 Test Methods for Flexible Treated Sleeving Used for Electrical Insulation
  • D351 - 18 Classification for Natural Muscovite Block Mica and Thins Based on Visual Quality
  • D352 - 97(2016) Test Methods for Pasted Mica Used in Electrical Insulation
  • D360 - 12(2019) Specification for Shellac Varnishes
  • D365 - 01(2017) Guide for Soluble Nitrocellulose Base Solutions
  • D374/D374M - 16 Test Methods for Thickness of Solid Electrical Insulation
  • D375/D375M - 95(2017) Specification for Asbestos Roving
  • D378 - 10(2016) Test Methods for Rubber (Elastomeric) Conveyor Belting, Flat Type
  • D380 - 94(2020) Test Methods for Rubber Hose
  • D381 - 19 Test Method for Gum Content in Fuels by Jet Evaporation
  • D387 - 00(2017) Test Method for Color and Strength of Chromatic Pigments with a Mechanical Muller
  • D388 - 19a Classification of Coals by Rank
  • D395 - 18 Test Methods for Rubber Property—Compression Set
  • D396 - 20 Specification for Fuel Oils
  • D402/D402M - 14 Test Method for Distillation of Cutback Asphalt
  • D409/D409M - 16 Test Method for Grindability of Coal by the Hardgrove-Machine Method
  • D412 - 16 Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
  • D413 - 98(2017) Test Methods for Rubber Property—Adhesion to Flexible Substrate
  • D420 - 18 Guide for Site Characterization for Engineering Design and Construction Purposes
  • D425 - 17 Test Method for Centrifuge Moisture Equivalent of Soils
  • D429 - 14 Test Methods for Rubber Property—Adhesion to Rigid Substrates
  • D430 - 06(2018) Test Methods for Rubber Deterioration—Dynamic Fatigue
  • D440 - 07(2019)e1 Test Method of Drop Shatter Test for Coal
  • D441 - 07(2019)e1 Test Method of Tumbler Test for Coal
  • D444 - 88(2020) Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow)
  • D445 - 19a Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
  • D446 - 12(2017) Specifications and Operating Instructions for Glass Capillary Kinematic Viscometers
  • D448 - 12(2017) Classification for Sizes of Aggregate for Road and Bridge Construction
  • D449/D449M - 03(2021) Specification for Asphalt Used in Dampproofing and Waterproofing
  • D450/D450M - 07(2018) Specification for Coal-Tar Pitch Used in Roofing, Dampproofing, and Waterproofing
  • D451/D451M - 17 Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products
  • D452/D452M - 19 Test Method for Sieve Analysis of Surfacing for Asphalt Roofing Products
  • D454 - 04(2019) Test Method for Rubber Deterioration by Heat and Air Pressure
  • D459 - 16 Terminology Relating to Soaps and Other Detergents
  • D460 - 91(2014) Test Methods for Sampling and Chemical Analysis of Soaps and Soap Products
  • D464 - 15(2020) Test Methods for Saponification Number of Pine Chemical Products Including Tall Oil and Other Related Products
  • D465 - 15(2020) Test Methods for Acid Number of Pine Chemical Products Including Tall Oil and Other Related Products
  • D470 - 13 Test Methods for Crosslinked Insulations and Jackets for Wire and Cable
  • D471 - 16a Test Method for Rubber Property—Effect of Liquids
  • D473 - 07(2017)e1 Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method
  • D476 - 15 Classification for Dry Pigmentary Titanium Dioxide Products
  • D478 - 02(2019) Specification for Zinc Yellow (Zinc Chromate) Pigments
  • D480 - 88(2020) Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes
  • D482 - 19 Test Method for Ash from Petroleum Products
  • D483 - 04(2018) Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils
  • D490 - 92(2016) Specification for Road Tar
  • D494 - 11(2019) Test Method for Acetone Extraction of Phenolic Molded or Laminated Products
  • D495 - 14 Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation
  • D500 - 95(2016) Test Methods of Chemical Analysis of Sulfonated and Sulfated Oils
  • D501 - 03(2016) Test Methods of Sampling and Chemical Analysis of Alkaline Detergents
  • D502 - 89(2016) Test Method for Particle Size of Soaps and Other Detergents
  • D509 - 20 Test Methods of Sampling and Grading Rosin
  • D511 - 14 Test Methods for Calcium and Magnesium In Water
  • D512 - 12 Test Methods for Chloride Ion In Water
  • D513 - 16 Test Methods for Total and Dissolved Carbon Dioxide in Water
  • D516 - 16 Test Method for Sulfate Ion in Water
  • D517 - 98(2015) Specification for Asphalt Plank
  • D519 - 04(2013) Test Method for Length of Fiber in Wool Top
  • D520 - 00(2019) Specification for Zinc Dust Pigment
  • D521 - 02(2019) Test Methods for Chemical Analysis of Zinc Dust (Metallic Zinc Powder)
  • D522/D522M - 17 Test Methods for Mandrel Bend Test of Attached Organic Coatings
  • D523 - 14(2018) Test Method for Specular Gloss
  • D524 - 15(2019) Test Method for Ramsbottom Carbon Residue of Petroleum Products
  • D525 - 12a(2019) Test Method for Oxidation Stability of Gasoline (Induction Period Method)\
  • D531 - 15(2019) Test Method for Rubber Property—Pusey and Jones Indentation
  • D542 - 14 Test Method for Index of Refraction of Transparent Organic Plastics
  • D543 - 20 Practices for Evaluating the Resistance of Plastics to Chemical Reagents
  • D545 - 19 Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)
  • D546 - 17 Test Method for Sieve Analysis of Mineral Filler for Asphalt Paving Mixtures
  • D558/D558M - 19 Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures
  • D559/D559M - 15 Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures
  • D560/D560M - 16 Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures
  • D561 - 82(2020) Specification for Carbon Black Pigment for Paint
  • D562 - 10(2018) Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer
  • D564 - 87(2017) Test Methods for Liquid Paint Driers
  • D565 - 99(2019) Test Method for Carbonizable Substances in White Mineral Oil
  • D566 - 20 Test Method for Dropping Point of Lubricating Grease
  • D570 - 98(2018) Test Method for Water Absorption of Plastics
  • D572 - 04(2019) Test Method for Rubber—Deterioration by Heat and Oxygen
  • D573 - 04(2019) Test Method for Rubber—Deterioration in an Air Oven
  • D575 - 91(2018) Test Methods for Rubber Properties in Compression
  • D578/D578M - 18 Specification for Glass Fiber Strands
  • D579/D579M - 15 Specification for Greige Woven Glass Fabrics
  • D580/D580M - 15 Specification for Greige Woven Glass Tapes and Webbings
  • D581/D581M - 12 Specification for Glass Fiber Greige Braided Tubular Sleeving
  • D584 - 10(2018) Test Method for Wool Content of Raw Wool—Laboratory Scale
  • D586 - 19 Test Method for Ash and Organic Matter Content of Degradable Erosion Control Products
  • D596 - 01(2018) Guide for Reporting Results of Analysis of Water
  • D600 - 07(2012) Specification for Liquid Paint Driers
  • D602 - 81(2019) Specification for Barium Sulfate Pigments
  • D605 - 82(2019) Specification for Magnesium Silicate Pigment (Talc)
  • D607 - 82(2019) Specification for Wet Ground Mica Pigments
  • D608 - 05(2019) Specification for Dibutyl Phthalate
  • D609 - 17 Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products
  • D610 - 08(2019) Practice for Evaluating Degree of Rusting on Painted Steel Surfaces
  • D611 - 12(2016) Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents
  • D612 - 88(2017) Test Method for Carbonizable Substances in Paraffin Wax
  • D613 - 18ae1 Test Method for Cetane Number of Diesel Fuel Oil
  • D618 - 13 Practice for Conditioning Plastics for Testing
  • D619 - 14 Test Methods for Vulcanized Fibre Used for Electrical Insulation
  • D622 - 99(2020) Test Methods for Rubber Hose for Automotive Air and Vacuum Brake System
  • D623 - 07(2019) Test Methods for Rubber Property—Heat Generation and Flexing Fatigue In Compression
  • D624 - 00(2020) Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
  • D628/D628M - 95(2017) Specification for Asbestos Tubular Sleeving
  • D629 - 15 Test Methods for Quantitative Analysis of Textiles
  • D632 - 12(2020)e1 Specification for Sodium Chloride
  • D633 - 11(2016) Volume Correction Table for Road Tar
  • D635 - 18 Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
  • D638 - 14 Test Method for Tensile Properties of Plastics
  • D642 - 20 Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads
  • D646 - 13 Test Method for Mass Per Unit Area of Paper and Paperboard of Aramid Papers (Basis Weight)
  • D648 - 18 Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
  • D653 - 20e1 Terminology Relating to Soil, Rock, and Contained Fluids
  • D660 - 93(2019) Test Method for Evaluating Degree of Checking of Exterior Paints
  • D661 - 93(2019) Test Method for Evaluating Degree of Cracking of Exterior Paints
  • D662 - 93(2019) Test Method for Evaluating Degree of Erosion of Exterior Paints
  • D664 - 18e2 Test Method for Acid Number of Petroleum Products by Potentiometric Titration
  • D665 - 19 Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water
  • D685 - 17 Practice for Conditioning Paper and Paper Products for Testing
  • D689 - 17 Test Method for Internal Tearing Resistance of Paper
  • D692/D692M - 20 Specification for Coarse Aggregate for Asphalt Paving Mixtures
  • D695 - 15 Test Method for Compressive Properties of Rigid Plastics
  • D696 - 16 Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer
  • D698 - 12e2 Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))
  • D704 - 99(2020) Specification for Melamine-Formaldehyde Molding Compounds
  • D705 - 99(2020) Specification for Urea-Formaldehyde Molding Compounds
  • D706 - 20 Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds (CA)
  • D707 - 15 Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds (CAB)
  • D709 - 17 Specification for Laminated Thermosetting Materials
  • D710 - 19 Specification for Vulcanized Fibre Sheets, Rolls, Rods, and Tubes Used for Electrical Insulation
  • D711 - 20 Test Method for No-Pick-Up Time of Traffic Paint
  • D713 - 12(2017) Practice for Conducting Road Service Tests on Fluid Traffic Marking Materials
  • D714 - 02(2017) Test Method for Evaluating Degree of Blistering of Paints
  • D715 - 86(2020) Test Methods for Analysis of Barium Sulfate Pigment
  • D716 - 86(2019) Test Methods for Evaluating Mica Pigment
  • D717 - 86(2020) Test Methods for Analysis of Magnesium Silicate Pigment
  • D718 - 86(2020) Test Methods for Analysis of Aluminum Silicate Pigment
  • D720/D720M - 15e1 Test Method for Free-Swelling Index of Coal
  • D721 - 17 Test Method for Oil Content of Petroleum Waxes
  • D731 - 18 Test Method for Molding Index of Thermosetting Molding Powder
  • D732 - 17 Test Method for Shear Strength of Plastics by Punch Tool
  • D737 - 18 Test Method for Air Permeability of Textile Fabrics
  • D740 - 11(2019) Specification for Methyl Ethyl Ketone,
  • D746 - 20 Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
  • D748 - 18 Specification for Natural Block Mica and Mica Films Suitable for Use in Fixed Mica-Dielectric Capacitors
  • D750 - 12(2017) Practice for Rubber Deterioration Using Artificial Weathering Apparatus
  • D751 - 19 Test Methods for Coated Fabrics
  • D763 - 06(2019) Specification for Raw and Burnt Umber Pigments
  • D765 - 87(2020) Specification for Raw and Burnt Sienna Pigments
  • D768 - 01(2019) Specification for Yellow Iron Oxide Hydrated
  • D769 - 01(2019) Specification for Black Synthetic Iron Oxide
  • D770 - 11(2019) Specification for Isopropyl Alcohol,
  • D772 - 18 Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints
  • D779 - 16 Test Method for Determining the Water Vapor Resistance of Sheet Materials in Contact with Liquid Water by the Dry Indicator Method
  • D785 - 08(2015) Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials
  • D787 - 18 Specification for Ethyl Cellulose Molding and Extrusion Compounds
  • D788 - 16 Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds
  • D789 - 19 Test Method for Determination of Relative Viscosity of Concentrated Polyamide (PA) Solutions
  • D790 - 17 Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
  • D792 - 20 Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
  • D800 - 05(2014) Test Methods of Chemical Analysis of Industrial Metal Cleaning Compositions
  • D801 - 02(2017) Test Methods for Sampling and Testing Dipentene
  • D802 - 02(2017) Test Methods for Sampling and Testing Pine Oils
  • D803 - 15(2020) Test Methods for Testing Tall Oil
  • D804 - 12(2017) Terminology Relating to Pine Chemicals, Including Tall Oil and Related Products
  • D806 - 19 Test Method for Cement Content of Hardened Soil-Cement Mixtures
  • D807 - 18 Practice for Assessing the Tendency of Industrial Boiler Waters to Cause Embrittlement (USBM Embrittlement Detector Method)
  • D808 - 16 Test Method for Chlorine in New and Used Petroleum Products (High Pressure Decomposition Device Method)
  • D813 - 07(2019) Test Method for Rubber Deterioration—Crack Growth
  • D814 - 95(2020) Test Method for Rubber Property—Vapor Transmission of Volatile Liquids
  • D816 - 06(2016) Test Methods for Rubber Cements
  • D817 - 12(2019) Test Methods of Testing Cellulose Acetate Propionate and Cellulose Acetate Butyrate
  • D820 - 93(2016) Test Methods for Chemical Analysis of Soaps Containing Synthetic Detergents
  • D822/D822M - 13(2018) Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
  • D823 - 18 Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels
  • D828 - 16e1 Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus
  • D831/D831M - 12(2020) Test Method for Gas Content of Cable and Capacitor Oils
  • D832 - 07(2018) Practice for Rubber Conditioning For Low Temperature Testing
  • D841 - 19 Specification for Nitration Grade Toluene
  • D843 - 19 Specification for Nitration Grade Xylene
  • D847 - 16 Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons
  • D848 - 18 Test Method for Acid Wash Color of Industrial Aromatic Hydrocarbons
  • D849 - 15(2019)e1 Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons
  • D850 - 18e1 Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials
  • D852 - 20 Test Method for Solidification Point of Benzene
  • D854 - 14 Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
  • D857 - 17 Test Method for Aluminum in Water
  • D858 - 17 Test Methods for Manganese in Water
  • D859 - 16 Test Method for Silica in Water
  • D861 - 07(2018) Practice for Use of the Tex System to Designate Linear Density of Fibers, Yarn Intermediates, and Yarns
  • D865 - 11(2018) Test Method for Rubber—Deterioration by Heating in Air (Test Tube Enclosure)
  • D868 - 10(2020) Practice for Determination of Degree of Bleeding of Traffic Paint
  • D869 - 85(2015) Test Method for Evaluating Degree of Settling of Paint
  • D870 - 15(2020) Practice for Testing Water Resistance of Coatings Using Water Immersion
  • D871 - 96(2019) Test Methods of Testing Cellulose Acetate
  • D873 - 12(2018) Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method)
  • D874 - 13a(2018) Test Method for Sulfated Ash from Lubricating Oils and Additives
  • D876 - 13 Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation
  • D877/D877M - 19 Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
  • D880 - 92(2015) Test Method for Impact Testing for Shipping Containers and Systems
  • D882 - 18 Test Method for Tensile Properties of Thin Plastic Sheeting
  • D883 - 20b Terminology Relating to Plastics
  • D885/D885M - 10A(2014)e1 Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made from Manufactured Organic-Base Fibers
  • D887 - 13 Practices for Sampling Water-Formed Deposits
  • D888 - 18 Test Methods for Dissolved Oxygen in Water
  • D889 - 13(2017) Test Method for Volatile Oil in Rosin
  • D890 - 12(2016) Test Method for Water in Liquid Pine Chemicals
  • D891 - 18 Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals
  • D892 - 18 Test Method for Foaming Characteristics of Lubricating Oils
  • D893 - 14(2018) Test Method for Insolubles in Used Lubricating Oils
  • D896 - 04(2017) Practice for Resistance of Adhesive Bonds to Chemical Reagents
  • D897 - 08(2016) Test Method for Tensile Properties of Adhesive Bonds
  • D899 - 00(2018) Practice for Applied Weight Per Unit Area of Liquid Adhesive
  • D903 - 98(2017) Test Method for Peel or Stripping Strength of Adhesive Bonds
  • D904 - 99(2013) Practice for Exposure of Adhesive Specimens to Artificial Light
  • D905 - 08(2013) Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
  • D906 - 20 Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading
  • D907 - 15 Terminology of Adhesives
  • D909 - 18e1 Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline
  • D910 - 20a Specification for Leaded Aviation Gasolines
  • D913 - 20 Practice for Evaluating Degree of Pavement Marking Line Wear
  • D914 - 12(2019) Test Methods for Ethylcellulose
  • D922 - 18 Specification for Nonrigid Vinyl Chloride Polymer Tubing
  • D923 - 15 Practices for Sampling Electrical Insulating Liquids
  • D924 - 15 Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
  • D925 - 14(2019) Test Methods for Rubber Property—Staining of Surfaces (Contact, Migration, and Diffusion)
  • D926 - 17 Test Method for Rubber Property—Plasticity and Recovery (Parallel Plate Method)
  • D928 - 03(2017) Specification for Sodium Bicarbonate
  • D932 - 20 Practice for Filamentous Iron Bacteria in Water and Water-Formed Deposits
  • D933 - 20 Practice for Reporting Results of Examination and Analysis of Water-Formed Deposits
  • D934 - 13 Practices for Identification of Crystalline Compounds in Water-Formed Deposits By X-Ray Diffraction
  • D937 - 07(2019) Test Method for Cone Penetration of Petrolatum
  • D938 - 12(2017) Test Method for Congealing Point of Petroleum Waxes, Including Petrolatum
  • D942 - 19 Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Pressure Vessel Method
  • D943 - 20 Test Method for Oxidation Characteristics of Inhibited Mineral Oils
  • D945 - 16 Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
  • D946/D946M - 20 Specification for Penetration-Graded Asphalt Binder for Use in Pavement Construction
  • D950 - 03(2020)e1 Test Method for Impact Strength of Adhesive Bonds
  • D951 - 17 Test Method for Water Resistance of Shipping Containers by Spray Method
  • D952 - 15 Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials
  • D953 - 19 Test Method for Pin-Bearing Strength of Plastics
  • D955 - 08(2014) Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics
  • D957 - 21 Practice for Determining Surface Temperature of Molds for Plastics
  • D962 - 81(2020) Specification for Aluminum Powder and Paste Pigments for Paints
  • D964 - 03(2020) Specification for Metallic Copper Powder for Use in Antifouling Paints
  • D968 - 17 Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive
  • D971 - 20 Test Method for Interfacial Tension of Insulating Liquids Against Water by the Ring Method
  • D972 - 16 Test Method for Evaporation Loss of Lubricating Greases and Oils
  • D974 - 14e2 Test Method for Acid and Base Number by Color-Indicator Titration
  • D975 - 20c Specification for Diesel Fuel
  • D976 - 06(2016) Test Method for Calculated Cetane Index of Distillate Fuels
  • D977 - 20 Specification for Emulsified Asphalt
  • D979/D979M - 15 Practice for Sampling Bituminous Paving Mixtures
  • D982 - 16 Test Method for Organic Nitrogen in Paper and Paperboard
  • D991 - 89(2020) Test Method for Rubber Property—Volume Resistivity Of Electrically Conductive and Antistatic Products
  • D994/D994M - 11(2016) Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type)
  • D996 - 16 Terminology of Packaging and Distribution Environments
  • D999 - 08(2015) Test Methods for Vibration Testing of Shipping Containers
  • D1000 - 17 Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications[2]

D1001-D2000[edit]

  • D1002 - 10(2019) Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
  • D1003 - 13 Test Method for Haze and Luminous Transmittance of Transparent Plastics
  • D1004 - 13 Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
  • D1005 - 95(2020) Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
  • D1006/D1006M - 13 Practice for Conducting Exterior Exposure Tests of Paints on Wood
  • D1007 - 11(2019) Specification for sec-Butyl Alcohol,
  • D1014 - 18 Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates
  • D1018 - 11(2016) Test Method for Hydrogen In Petroleum Fractions
  • D1025 - 10(2015)e1 Test Method for Nonvolatile Residue of Polymerization-Grade Butadiene
  • D1036 - 99(2017) Test Methods of Static Tests of Wood Poles
  • D1037 - 12(2020) Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials
  • D1038 - 19 Terminology Relating to Veneer, Plywood, and Wood Structural Panels
  • D1039 - 16 Test Methods for Glass-Bonded Mica Used as Electrical Insulation
  • D1042 - 12(2017) Test Method for Linear Dimensional Changes of Plastics Caused by Exposure to Heat and Moisture
  • D1043 - 16 Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
  • D1044 - 19 Test Method for Resistance of Transparent Plastics to Surface Abrasion by the Taber Abraser
  • D1045 - 19 Test Methods for Sampling and Testing Plasticizers Used in Plastics
  • D1047 - 16 Specification for Poly(Vinyl Chloride) Jacket for Wire and Cable
  • D1048 - 20 Specification for Rubber Insulating Blankets
  • D1049 - 98(2017) Specification for Rubber Insulating Covers
  • D1050 - 05(2017) Specification for Rubber Insulating Line Hose
  • D1051 - 19 Specification for Rubber Insulating Sleeves
  • D1052 - 09(2019) Test Method for Measuring Rubber Deterioration—Cut Growth Using Ross Flexing Apparatus
  • D1053 - 92a(2018) Test Methods for Rubber Property—Stiffening at Low Temperatures: Flexible Polymers and Coated Fabrics
  • D1056 - 20 Specification for Flexible Cellular Materials—Sponge or Expanded Rubber
  • D1059 - 17 Test Method for Yarn Number Based on Short-Length Specimens
  • D1060 - 10(2018) Practice for Core Sampling of Raw Wool in Packages for Determination of Percentage of Clean Wool Fiber Present
  • D1061/D1061M - 95(2017) Specification for Asbestos Lap
  • D1062 - 08(2015) Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
  • D1065 - 18 Test Method for Unsaponifiable Matter in Pine Chemicals, Including Rosin, Tall Oil, and Related Products
  • D1066 - 18e1 Practice for Sampling Steam
  • D1067 - 16 Test Methods for Acidity or Alkalinity of Water
  • D1068 - 15 Test Methods for Iron in Water
  • D1070 - 03(2017) Test Methods for Relative Density of Gaseous Fuels
  • D1071 - 17 Test Methods for Volumetric Measurement of Gaseous Fuel Samples
  • D1072 - 06(2017) Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration
  • D1073 - 16 Specification for Fine Aggregate for Asphalt Paving Mixtures
  • D1074 - 17 Test Method for Compressive Strength of Asphalt Mixtures
  • D1076 - 15(2020) Specification for Rubber—Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex
  • D1078 - 11(2019) Test Method for Distillation Range of Volatile Organic Liquids
  • D1079 - 20 Terminology Relating to Roofing and Waterproofing
  • D1082 - 17 Test Method for Dissipation Factor and Permittivity (Dielectric Constant) of Mica
  • D1084 - 16 Test Methods for Viscosity of Adhesives
  • D1091 - 11(2016) Test Methods for Phosphorus in Lubricating Oils and Additives
  • D1092 - 20 Test Method for Measuring Apparent Viscosity of Lubricating Greases
  • D1093 - 11(2017) Test Method for Acidity of Hydrocarbon Liquids and Their Distillation Residues
  • D1094 - 07(2019) Test Method for Water Reaction of Aviation Fuels
  • D1101 - 97a(2018) Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use
  • D1102 - 84(2013) Test Method for Ash in Wood
  • D1105 - 96(2013) Test Method for Preparation of Extractive-Free Wood
  • D1106 - 96(2013) Test Method for Acid-Insoluble Lignin in Wood
  • D1107 - 96(2013) Test Method for Ethanol-Toluene Solubility of Wood
  • D1108 - 96(2013) Test Method for Dichloromethane Solubles in Wood
  • D1109 - 84(2013) Test Method for 1 % Sodium Hydroxide Solubility of Wood
  • D1110 - 84(2013) Test Methods for Water Solubility of Wood
  • D1113 - 13 Test Method for Vegetable Matter and Other Alkali-Insoluble Impurities in Scoured Wool
  • D1118/D1118M - 95(2017) Test Method for Magnetic Rating of Asbestos Fiber and Asbestos Textiles
  • D1119 - 05(2015) Test Method for Percent Ash Content of Engine Coolants
  • D1120 - 17 Test Method for Boiling Point of Engine Coolants
  • D1121 - 11(2020) Test Method for Reserve Alkalinity of Engine Coolants and Antirusts
  • D1122 - 20 Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
  • D1123 - 99(2015) Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
  • D1125 - 14 Test Methods for Electrical Conductivity and Resistivity of Water
  • D1126 - 17 Test Method for Hardness in Water
  • D1129 - 13(2020) Terminology Relating to Water
  • D1133 - 13 Test Method for Kauri-Butanol Value of Hydrocarbon Solvents
  • D1135 - 86(2020) Test Methods for Chemical Analysis of Blue Pigments
  • D1139/D1139M - 15 Specification for Aggregate for Single or Multiple Bituminous Surface Treatments
  • D1140 - 17 Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing
  • D1141 - 98(2013) Practice for the Preparation of Substitute Ocean Water
  • D1142 - 95(2012) Test Method for Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point Temperature
  • D1143/D1143M - 20 Test Methods for Deep Foundation Elements Under Static Axial Compressive Load
  • D1144 - 99(2016) Practice for Determining Strength Development of Adhesive Bonds
  • D1146 - 00(2018)e1 Test Method for Blocking Point of Potentially Adhesive Layers
  • D1148 - 13(2018) Test Method for Rubber Deterioration—Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces
  • D1149 - 18 Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
  • D1151 - 00(2013) Practice for Effect of Moisture and Temperature on Adhesive Bonds
  • D1152 - 06(2012) Specification for Methanol (Methyl Alcohol)
  • D1153 - 12 Specification for Methyl Isobutyl Ketone
  • D1155 - 10(2020) Test Method for Roundness of Glass Spheres
  • D1157 - 91(2019) Test Method for Total Inhibitor Content (TBC) of Light Hydrocarbons
  • D1159 - 07(2017) Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration
  • D1160 - 18 Test Method for Distillation of Petroleum Products at Reduced Pressure
  • D1165 - 18 Nomenclature of Commercial Hardwoods and Softwoods
  • D1166 - 84(2013) Test Method for Methoxyl Groups in Wood and Related Materials
  • D1169 - 19a Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids
  • D1171 - 18 Test Method for Rubber Deterioration—Surface Ozone Cracking Outdoors (Triangular Specimens)
  • D1172 - 15 Guide for pH of Aqueous Solutions of Soaps and Detergents
  • D1173 - 07(2015) Test Method for Foaming Properties of Surface-Active Agents
  • D1176 - 14(2019) Practice for Sampling and Preparing Aqueous Solutions of Engine Coolants or Antirusts for Testing Purposes
  • D1177 - 17 Test Method for Freezing Point of Aqueous Engine Coolants
  • D1179 - 16 Test Methods for Fluoride Ion in Water
  • D1183 - 03(2019) Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
  • D1184 - 98(2020) Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies
  • D1185 - 98a(2017) Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping
  • D1187/D1187M - 97(2018) Specification for Asphalt-Base Emulsions for Use as Protective Coatings for Metal
  • D1188 - 07(2015) Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples
  • D1193 - 06(2018) Specification for Reagent Water
  • D1195/D1195M - 09(2015) Test Method for Repetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements
  • D1196/D1196M - 12(2016) Test Method for Nonrepetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements
  • D1199 - 86(2020) Specification for Calcium Carbonate Pigments
  • D1200 - 10(2018) Test Method for Viscosity by Ford Viscosity Cup
  • D1201 - 13 Specification for Thermosetting Polyester Molding Compounds
  • D1203 - 20 Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods
  • D1204 - 14(2020) Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
  • D1208 - 96(2019) Test Methods for Common Properties of Certain Pigments
  • D1209 - 05(2019) Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
  • D1210 - 05(2014) Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage
  • D1212 - 91(2020) Test Methods for Measurement of Wet Film Thickness of Organic Coatings
  • D1214 - 10(2020) Test Method for Sieve Analysis of Glass Spheres
  • D1217 - 20 Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
  • D1218 - 12(2016) Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids
  • D1227/D1227M - 13(2019)e1 Specification for Emulsified Asphalt Used as a Protective Coating for Roofing
  • D1229 - 03(2019) Test Method for Rubber Property—Compression Set at Low Temperatures
  • D1230 - 17 Test Method for Flammability of Apparel Textiles
  • D1234 - 13 Test Method of Sampling and Testing Staple Length of Grease Wool
  • D1238 - 20 Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
  • D1239 - 14 Test Method for Resistance of Plastic Films to Extraction by Chemicals
  • D1240 - 14(2018) Test Methods for Rosin Acids Content of Pine Chemicals, Including Rosin, Tall Oil, and Related Products
  • D1241 - 15 Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses
  • D1243 - 15 Test Method for Dilute Solution Viscosity of Vinyl Chloride Polymers
  • D1244 - 98(2020) Practice for Designation of Yarn Construction
  • D1245 - 17 Practice for Examination of Water-Formed Deposits by Chemical Microscopy
  • D1246 - 16 Test Method for Bromide Ion in Water
  • D1248 - 16 Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable
  • D1250 - 19e1 Guide for the Use of the Joint API and ASTM Adjunct for Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils: API MPMS Chapter 11.1
  • D1252 - 06(2020) Test Methods for Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water
  • D1253 - 14 Test Method for Residual Chlorine in Water
  • D1257 - 07(2012) Specification for High-Gravity Glycerin
  • D1259 - 06(2018) Test Methods for Nonvolatile Content of Resin Solutions
  • D1264 - 18e1 Test Method for Determining the Water Washout Characteristics of Lubricating Greases
  • D1265 - 11(2017)e1 Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method
  • D1266 - 18 Test Method for Sulfur in Petroleum Products (Lamp Method)
  • D1267 - 18 Test Method for Gauge Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method)
  • D1275 - 15 Test Method for Corrosive Sulfur in Electrical Insulating Liquids
  • D1278 - 91a(2020) Test Methods for Rubber from Natural Sources—Chemical Analysis
  • D1280 - 14 Guide for Total Immersion Corrosion Test for Soak Tank Metal Cleaners
  • D1282 - 18 Test Method for Resistance to Airflow as an Indication of Average Fiber Diameter of Wool Top, Card Sliver, and Scoured Wool
  • D1283 - 05(2013) Test Method for Alkali-Solubility of Wools
  • D1287 - 11(2020) Test Method for pH of Engine Coolants and Antirusts
  • D1290 - 95(2015) Test Method for Sediment in Water-Emulsion Polishes by Centrifuge
  • D1291 - 17 Practice for Estimation of Chlorine Demand of Water
  • D1292 - 15 Test Method for Odor in Water 
  • D1293 - 18 Test Methods for pH of Water
  • D1294 - 05(2013) Test Method for Tensile Strength and Breaking Tenacity of Wool Fiber Bundles 1-in. (25.4-mm) Gage Length
  • D1296 - 01(2012) Test Method for Odor of Volatile Solvents and Diluents
  • D1298 - 12b(2017) Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
  • D1301 - 91(2020) Test Methods for Chemical Analysis of White Lead Pigments
  • D1304 - 99(2020)e1 Test Methods for Adhesives Relative to Their Use as Electrical Insulation
  • D1305 - 16 Specification for Electrical Insulating Paper and Paperboard—Sulfate (Kraft) Layer Type
  • D1308 - 20 Test Method for Effect of Household Chemicals on Clear and Pigmented Coating Systems
  • D1310 - 14 Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
  • D1316 - 20 Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer
  • D1318 - 16 Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method)
  • D1319 - 20a Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
  • D1321 - 16a Test Method for Needle Penetration of Petroleum Waxes
  • D1322 - 19 Test Method for Smoke Point of Kerosene and Aviation Turbine Fuel
  • D1327/D1327M - 04(2020) Specification for Bitumen-Saturated Woven Burlap Fabrics Used in Roofing and Waterproofing
  • D1329 - 16 Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test)
  • D1330 - 04(2015)e1 Specification for Rubber Sheet Gaskets
  • D1331 - 14 Test Methods for Surface and Interfacial Tension of Solutions of Paints, Solvents, Solutions of Surface-Active Agents, and Related Materials
  • D1334 - 18 Test Method for Wool Content of Raw Wool—Commercial Scale
  • D1335 - 17e1 Test Method for Tuft Bind of Pile Yarn Floor Coverings
  • D1336 - 07(2019) Test Method for Distortion of Yarn in Woven Fabrics
  • D1337 - 10(2016) Practice for Storage Life of Adhesives by Viscosity and Bond Strength
  • D1338 - 99(2016) Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength
  • D1343 - 95(2019) Test Method for Viscosity of Cellulose Derivatives by Ball-Drop Method
  • D1349 - 14(2019) Practice for Rubber—Standard Conditions for Testing
  • D1351 - 20 Specification for Thermoplastic Polyethylene Insulation for Electrical Wire and Cable
  • D1353 - 13 Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products
  • D1356 - 20a Terminology Relating to Sampling and Analysis of Atmospheres
  • D1357 - 95(2019) Practice for Planning the Sampling of the Ambient Atmosphere
  • D1363 - 06(2019) Test Method for Permanganate Time of Acetone and Methanol
  • D1364 - 02(2012) Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method)
  • D1366 - 86(2019) Practice for Reporting Particle Size Characteristics of Pigments
  • D1369 - 19 Practice for Quantities of Materials for Asphalt-Aggregate Surface Treatments
  • D1370/D1370M - 12(2021) Test Method for Contact Compatibility Between Asphaltic Materials (Oliensis Test)
  • D1384 - 05(2019) Test Method for Corrosion Test for Engine Coolants in Glassware
  • D1385 - 07(2018)e1 Test Method for Hydrazine in Water
  • D1386 - 15 Test Method for Acid Number (Empirical) of Synthetic and Natural Waxes
  • D1387 - 89(2019) Test Method for Saponification Number (Empirical) of Synthetic and Natural Waxes
  • D1388 - 18 Test Method for Stiffness of Fabrics
  • D1394 - 76(2020) Test Methods for Chemical Analysis of White Titanium Pigments
  • D1401 - 19 Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
  • D1403 - 20b Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment
  • D1404/D1404M - 99(2019) Test Method for Estimation of Deleterious Particles in Lubricating Grease
  • D1412/D1412M - 20 Test Method for Equilibrium Moisture of Coal at 96 to 97 Percent Relative Humidity and 30 °C
  • D1414 - 15 Test Methods for Rubber O-Rings
  • D1415 - 18 Test Method for Rubber Property—International Hardness
  • D1417 - 16 Test Methods for Rubber Latices—Synthetic
  • D1418 - 17 Practice for Rubber and Rubber Latices—Nomenclature
  • D1422/D1422M - 13(2020) Test Method for Twist in Single Spun Yarns by the Untwist-Retwist Method
  • D1423/D1423M - 16 Test Method for Twist in Yarns by Direct-Counting
  • D1424 - 09(2019) Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus
  • D1425/D1425M - 14(2020) Test Method for Evenness of Textile Strands Using Capacitance Testing Equipment
  • D1426 - 15 Test Methods for Ammonia Nitrogen In Water
  • D1429 - 13 Test Methods for Specific Gravity of Water and Brine
  • D1430 - 17 Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics
  • D1434 - 82(2015)e1 Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting
  • D1435 - 20 Practice for Outdoor Weathering of Plastics
  • D1436 - 17 Test Methods for Application of Emulsion Floor Polishes to Substrates for Testing Purposes
  • D1439 - 15 Test Methods for Sodium Carboxymethylcellulose
  • D1440 - 07(2019) Test Method for Length and Length Distribution of Cotton Fibers (Array Method)
  • D1441 - 12(2020) Practice for Sampling Cotton Fibers for Testing
  • D1442 - 06(2019) Test Method for Maturity of Cotton Fibers (Sodium Hydroxide Swelling and Polarized Light Procedures)
  • D1445/D1445M - 12(2021) Test Method for Breaking Strength and Elongation of Cotton Fibers (Flat Bundle Method)
  • D1447 - 07(2021) Test Method for Length and Length Uniformity of Cotton Fibers by Photoelectric Measurement
  • D1452/D1452M - 16 Practice for Soil Exploration and Sampling by Auger Borings
  • D1455 - 17 Test Method for 60° Specular Gloss of Emulsion Floor Polish
  • D1456 - 86(2020) Test Method for Rubber Property—Elongation at Specific Stress
  • D1460 - 86(2020) Test Method for Rubber Property—Change in Length During Liquid Immersion
  • D1461 - 17 Test Method for Moisture or Volatile Distillates in Asphalt Mixtures
  • D1464 - 12(2019) Practice for Differential Dyeing Behavior of Cotton
  • D1465 - 10(2015) Test Method for Blocking and Picking Points of Petroleum Wax
  • D1474/D1474M - 13(2018) Test Methods for Indentation Hardness of Organic Coatings
  • D1475 - 13(2020) Test Method for Density of Liquid Coatings, Inks, and Related Products
  • D1476 - 02(2012) Test Method for Heptane Miscibility of Lacquer Solvents
  • D1478 - 20 Test Method for Low-Temperature Torque of Ball Bearing Grease
  • D1480 - 15 Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
  • D1481 - 17 Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
  • D1483 - 12(2016) Test Method for Oil Absorption of Pigments by Gardner-Coleman Method
  • D1485 - 07(2020) Practice for Rubber from Natural Sources—Sampling and Sample Preparation
  • D1488 - 00(2018) Test Method for Amylaceous Matter in Adhesives
  • D1489 - 09(2016) Test Method for Nonvolatile Content of Aqueous Adhesives
  • D1490 - 01(2018) Test Method for Nonvolatile Content of Urea-Formaldehyde Resin Solutions
  • D1492 - 13 Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration
  • D1494 - 17 Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels
  • D1498 - 14 Test Method for Oxidation-Reduction Potential of Water
  • D1499 - 13 Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics
  • D1500 - 12(2017) Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
  • D1505 - 18 Test Method for Density of Plastics by the Density-Gradient Technique
  • D1506 - 15(2020) Test Methods for Carbon Black—Ash Content
  • D1508 - 12(2017) Test Method for Carbon Black, Pelleted Fines and Attrition
  • D1509 - 18 Test Methods for Carbon Black—Heating LossD1510 - 19a Test Method for Carbon Black—Iodine Adsorption Number
  • D1511 - 12(2017) Test Method for Carbon Black—Pellet Size Distribution
  • D1512 - 15b(2020) Test Methods for Carbon Black—pH Value
  • D1513 - 05(2017) Test Method for Carbon Black, Pelleted—Pour Density
  • D1514 - 15(2020) Test Method for Carbon Black—Sieve Residue
  • D1516 - 05(2017) Test Method for Width of Leather
  • D1517 - 18 Terminology Relating to Leather
  • D1518 - 14 Test Method for Thermal Resistance of Batting Systems Using a Hot Plate
  • D1519 - 95(2019) Test Methods for Rubber Chemicals—Determination of Melting Range
  • D1524 - 15 Test Method for Visual Examination of Used Electrical Insulating Liquids in the Field
  • D1525 - 17e1 Test Method for Vicat Softening Temperature of Plastics
  • D1533 - 20 Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration
  • D1534 - 95(2017) Test Method for Approximate Acidity in Electrical Insulating Liquids by Color-Indicator Titration
  • D1535 - 14(2018) Practice for Specifying Color by the Munsell System
  • D1544 - 04(2018) Test Method for Color of Transparent Liquids (Gardner Color Scale)
  • D1545 - 13(2017) Test Method for Viscosity of Transparent Liquids by Bubble Time Method
  • D1550 - 18 ASTM Butadiene Measurement Tables
  • D1552 - 16e1 Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)
  • D1554 - 10(2016) Terminology Relating to Wood-Base Fiber and Particle Panel Materials
  • D1555 - 16 Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane
  • D1555M - 16 Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric]
  • D1556/D1556M - 15e1 Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method
  • D1557 - 12e1 Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))
  • D1560 - 15 Test Methods for Resistance to Deformation and Cohesion of Asphalt Mixtures by Means of Hveem Apparatus
  • D1561/D1561M - 13 Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor
  • D1562 - 15 Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds (CAP)
  • D1566 - 20 Terminology Relating to Rubber
  • D1568 - 05(2014) Test Methods for Sampling and Chemical Analysis of Alkylbenzene Sulfonates
  • D1569 - 05(2014) Test Methods for Detergent Alkylate
  • D1570 - 95(2016) Test Methods for Sampling and Chemical Analysis of Fatty Alkyl Sulfates
  • D1571/D1571M - 95(2017) Specification for Woven Asbestos Cloth
  • D1573/D1573M - 95(2017) Test Method for Heat Aging of Asbestos Textiles
  • D1574 - 04(2013) Test Method for Extractable Matter in Wool and Other Animal Fibers
  • D1575 - 13 Test Method for Fiber Length of Wool in Scoured Wool and in Card Sliver
  • D1576 - 13 Test Method for Moisture in Wool by Oven-Drying
  • D1577 - 07(2018) Test Methods for Linear Density of Textile Fibers
  • D1578 - 93(2016) Test Method for Breaking Strength of Yarn in Skein Form
  • D1579 - 01(2018) Test Method for Filler Content of Phenol, Resorcinol, and Melamine Adhesives
  • D1582 - 98(2017) Test Method for Nonvolatile Content of Liquid Phenol, Resorcinol, and Melamine Adhesives
  • D1583 - 01(2018) Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
  • D1585 - 15(2020) Test Methods for Fatty Acids Content of Pine Chemicals, Including Rosin, Tall Oil, and Related Products
  • D1587/D1587M - 15 Practice for Thin-Walled Tube Sampling of Fine-Grained Soils for Geotechnical Purposes
  • D1593 - 19 Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting
  • D1596 - 14 Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material
  • D1598 - 15a Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
  • D1599 - 18 Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
  • D1600 - 18 Terminology for Abbreviated Terms Relating to Plastics
  • D1601 - 18 Test Method for Dilute Solution Viscosity of Ethylene Polymers
  • D1603 - 20 Test Method for Carbon Black Content in Olefin Plastics
  • D1607 - 91(2018)e1 Test Method for Nitrogen Dioxide Content of the Atmosphere (Griess-Saltzman Reaction)
  • D1608 - 16 Test Method for Oxides of Nitrogen in Gaseous Combustion Products (Phenol-Disulfonic Acid Procedures)
  • D1610 - 18 Practice for Conditioning Leather and Leather Products for Testing
  • D1611 - 12(2019) Test Method for Corrosion Produced by Leather in Contact with Metal
  • D1613 - 17 Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
  • D1614 - 09(2017) Test Method for Alkalinity in Acetone
  • D1617 - 07(2012) Test Method for Ester Value of Solvents and Thinners
  • D1618 - 18 Test Method for Carbon Black Extractables—Transmittance of Toluene Extract
  • D1619 - 20 Test Methods for Carbon Black—Sulfur Content
  • D1621 - 16 Test Method for Compressive Properties of Rigid Cellular Plastics
  • D1622 - 20 Test Method for Apparent Density of Rigid Cellular Plastics
  • D1623 - 17 Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics
  • D1630 - 16 Test Method for Rubber Property—Abrasion Resistance (Footwear Abrader)
  • D1631 - 10(2018)e1 Test Method for Water in Phenol and Related Materials by the Iodine Reagent Method
  • D1632 - 17e1 Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory
  • D1633 - 17 Test Methods for Compressive Strength of Molded Soil-Cement Cylinders
  • D1634 - 17 Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)
  • D1635/D1635M - 19 Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading 
  • D1636 - 13 Specification for Allyl Molding Compounds
  • D1640/D1640M - 14(2018) Test Methods for Drying, Curing, or Film Formation of Organic Coatings
  • D1644 - 01(2017) Test Methods for Nonvolatile Content of Varnishes
  • D1646 - 19a Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
  • D1648 - 86(2020) Specification for Basic Lead Silicochromate Pigment
  • D1649 - 01(2019) Specification for Strontium Chromate Pigment
  • D1652 - 11(2019) Test Method for Epoxy Content of Epoxy Resins
  • D1653 - 13 Test Methods for Water Vapor Transmission of Organic Coating Films
  • D1654 - 08(2016)e1 Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
  • D1655 - 20d Specification for Aviation Turbine Fuels
  • D1657 - 12(2017) Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
  • D1662 - 19 Test Method for Active Sulfur in Cutting Oils
  • D1665 - 20 Test Method for Engler Specific Viscosity of Tar Products
  • D1666 - 17 Test Methods for Conducting Machining Tests of Wood and Wood-Base Panel Materials
  • D1667 - 17 Specification for Flexible Cellular Materials—Poly (Vinyl Chloride) Foam (Closed-Cell)
  • D1668/D1668M - 97a(2014)e1 Specification for Glass Fabrics (Woven and Treated) for Roofing and Waterproofing
  • D1669/D1669M - 07(2019) Practice for Preparation of Test Panels for Accelerated and Outdoor Weathering of Bituminous Coatings
  • D1670/D1670M - 11(2018) Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials
  • D1675 - 18 Test Methods for Polytetrafluoroethylene Tubing
  • D1676 - 17 Test Methods for Film-Insulated Magnet Wire
  • D1677 - 17 Methods for Sampling and Testing Untreated Mica Paper Used for Electrical Insulation
  • D1681 - 05(2014) Test Method for Synthetic Anionic Active Ingredient in Detergents by Cationic Titration Procedure
  • D1683/D1683M - 17(2018) Test Method for Failure in Sewn Seams of Woven Fabrics
  • D1684 - 07(2020) Practice for Lighting Cotton Classing Rooms for Color Grading
  • D1686 - 19 Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale)
  • D1687 - 17 Test Methods for Chromium in Water
  • D1688 - 17 Test Methods for Copper in Water
  • D1691 - 17 Test Methods for Zinc in Water
  • D1693 - 15e1 Test Method for Environmental Stress-Cracking of Ethylene Plastics
  • D1695 - 07(2019) Terminology of Cellulose and Cellulose Derivatives
  • D1696 - 95(2019)e1 Test Method for Solubility of Cellulose in Sodium Hydroxide
  • D1708 - 18 Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
  • D1709 - 16ae1 Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
  • D1710 - 15 Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes
  • D1711 - 20 Terminology Relating to Electrical Insulation
  • D1712 - 09(2020) Practice for Resistance of Plastics to Sulfide Staining
  • D1718 - 09(2017) Specification for Isobutyl Acetate (95 % Grade)
  • D1719 - 11(2019) Specification for Isobutyl Alcohol,
  • D1720 - 03(2012) Test Method for Dilution Ratio of Active Solvents in Cellulose Nitrate Solutions
  • D1722 - 09(2017) Test Method for Water Miscibility of Water-Soluble Solvents
  • D1725 - 12(2019) Practice for Preparing Resin Solutions for Viscosity Measurement by Bubble Time Method
  • D1726 - 11(2019) Test Methods for Hydrolyzable Chloride Content of Liquid Epoxy Resins
  • D1729 - 16 Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
  • D1730 - 09(2020) Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting
  • D1731 - 09(2020) Practices for Preparation of Hot-Dip Aluminum Surfaces for Painting
  • D1732 - 03(2018) Practices for Preparation of Magnesium Alloy Surfaces for Painting
  • D1734 - 93(2013) Practice for Making Cementitious Panels for Testing Coatings
  • D1735 - 14 Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
  • D1739 - 98(2017) Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter)
  • D1742 - 20 Test Method for Oil Separation from Lubricating Grease During Storage
  • D1743 - 13(2018) Test Method for Determining Corrosion Preventive Properties of Lubricating Greases
  • D1746 - 15 Test Method for Transparency of Plastic Sheeting
  • D1747 - 09(2019) Test Method for Refractive Index of Viscous Materials
  • D1748 - 10(2015) Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet
  • D1751 - 18 Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types)
  • D1752 - 18 Specification for Preformed Sponge Rubber, Cork and Recycled PVC Expansion Joint Fillers for Concrete Paving and Structural Construction
  • D1754/D1754M - 20 Test Method for Effects of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)
  • D1755 - 15 Specification for Poly(Vinyl Chloride) Resins
  • D1761 - 20 Test Methods for Mechanical Fasteners in Wood and Wood-Based Materials
  • D1762 - 84(2013) Test Method for Chemical Analysis of Wood Charcoal
  • D1763 - 00(2013) Specification for Epoxy Resins
  • D1765 - 19 Classification System for Carbon Blacks Used in Rubber Products
  • D1766 - 05(2016) Test Method for Rubber Chemicals—Solubility
  • D1767 - 89(2017) Test Method for Ethylene Diamine Tetraacetate (EDTA) in Soaps or Synthetic Detergents
  • D1768 - 89(2016) Test Method for Sodium Alkylbenzene Sulfonate in Synthetic Detergents by Ultraviolet Absorption
  • D1770 - 94(2012)e1 Test Method for Neps, Vegetable Matter, and Colored Fiber in Wool Top
  • D1776/D1776M - 20 Practice for Conditioning and Testing Textiles
  • D1777 - 96(2019) Test Method for Thickness of Textile Materials
  • D1779 - 98(2017) Specification for Adhesive for Acoustical Materials
  • D1780 - 05(2020) Practice for Conducting Creep Tests of Metal-to-Metal Adhesives
  • D1781 - 98(2012) Test Method for Climbing Drum Peel for Adhesives
  • D1782 - 17 Test Methods for Operating Performance of Particulate Cation-Exchange Materials
  • D1783 - 01(2020) Test Methods for Phenolic Compounds in Water
  • D1784 - 20 Classification System and Basis for Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
  • D1785 - 15e1 Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
  • D1786 - 16 Specification for Toluene Diisocyanate
  • D1790 - 14 Test Method for Brittleness Temperature of Plastic Sheeting by Impact
  • D1791 - 93(2015) Test Method for Accelerated Aging of Liquid Water-Emulsion Floor Polishes
  • D1792 - 17 Test Method for Long-Term Removability Properties of Emulsion Floor Polishes
  • D1793 - 17 Test Method for Water Spotting of Emulsion Floor Polishes
  • D1795 - 13 Test Method for Intrinsic Viscosity of Cellulose
  • D1796 - 11(2016) Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
  • D1799 - 20 Practice for Carbon Black—Sampling Packaged Shipments
  • D1813 - 13(2017) Test Method for Measuring Thickness of Leather Test Specimens
  • D1814 - 70(2015) Test Method for Measuring Thickness of Leather Units
  • D1815 - 00(2015) Test Method for Water Absorption (Static) of Vegetable Tanned Leather
  • D1816 - 12(2019) Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using VDE Electrodes
  • D1817 - 05(2016) Test Method for Rubber Chemicals—Density
  • D1822 - 13 Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials
  • D1823 - 16 Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer
  • D1824 - 16 Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates
  • D1826 - 94(2017) Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter
  • D1828 - 01(2013) Practice for Atmospheric Exposure of Adhesive-Bonded Joints and Structures
  • D1830 - 17 Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
  • D1831 - 20 Test Method for Roll Stability of Lubricating Grease
  • D1833 - 87(2017) Test Method for Odor of Petroleum Wax
  • D1835 - 20 Specification for Liquefied Petroleum (LP) Gases
  • D1836 - 07(2013) Specification for Commercial Hexanes
  • D1838 - 20 Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
  • D1840 - 07(2017) Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
  • D1844 - 86(2020) Test Methods for Chemical Analysis of Basic Lead Silicochromate
  • D1845 - 86(2020) Test Methods for Chemical Analysis of Strontium Chromate Pigment
  • D1849 - 95(2019) Test Method for Package Stability of Paint
  • D1856 - 09(2015) Test Method for Recovery of Asphalt From Solution by Abson Method
  • D1857/D1857M - 18 Test Method for Fusibility of Coal and Coke Ash
  • D1863/D1863M - 05(2018) Specification for Mineral Aggregate Used on Built-Up Roofs
  • D1864/D1864M - 89(2017) Test Method for Moisture in Mineral Aggregate Used on Built-Up Roofs
  • D1865/D1865M - 09(2017) Test Method for Hardness of Mineral Aggregate Used on Built-Up Roofs
  • D1868 - 20 Test Method for Detection and Measurement of Partial Discharge (Corona) Pulses in Evaluation of Insulation Systems
  • D1869 - 15 Specification for Rubber Rings for Fiber-Reinforced Cement Pipe
  • D1871 - 04(2014) Test Method for Adhesion Between Tire Bead Wire and Rubber
  • D1874 - 16 Specification for Water- or Solvent-Soluble Liquid Adhesives for Automatic Machine Sealing of Top Flaps of Fiberboard Shipping Cases
  • D1875 - 03(2018) Test Method for Density of Adhesives in Fluid Form
  • D1876 - 08(2015)e1 Test Method for Peel Resistance of Adhesives (T-Peel Test)
  • D1879 - 06(2014) Practice for Exposure of Adhesive Specimens to Ionizing Radiation
  • D1881 - 17 Test Method for Foaming Tendencies of Engine Coolants in Glassware
  • D1882 - 17 Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles
  • D1883 - 16 Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils
  • D1886 - 14 Test Methods for Nickel in Water
  • D1890 - 15(2017) Test Method for Beta Particle Radioactivity of Water
  • D1894 - 14 Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting
  • D1895 - 17 Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials
  • D1896/D1896M - 10(2017) Practice for Transfer Molding Test Specimens of Thermosetting Compounds
  • D1900 - 20 Practice for Carbon Black—Sampling Bulk Shipments
  • D1901 - 10(2020) Test Method for Relative Evaporation Time of Halogenated Organic Solvents and Their Admixtures
  • D1903 - 08(2017) Practice for Determining the Coefficient of Thermal Expansion of Electrical Insulating Liquids of Petroleum Origin, and Askarels
  • D1907/D1907M - 12(2018) Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method
  • D1909 - 13(2020)e1 Tables of Commercial Moisture Regains and Commercial Allowances for Textile Fibers
  • D1912 - 00(2016)e1 Test Method for Cold-Crack Resistance of Upholstery Leather
  • D1913 - 00(2015) Test Method for Resistance to Wetting of Garment-Type Leathers (Spray Test)
  • D1914 - 95(2014) Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres
  • D1917 - 03(2017) Test Methods for Rubber Property—Shrinkage of Raw and Compounded Hot-Polymerized Styrene-Butadiene Rubber (SBR)
  • D1918/D1918M - 95(2017) Test Method for Asbestos Content of Asbestos Textiles
  • D1921 - 18 Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
  • D1922 - 15(2020) Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
  • D1926 - 00(2019) Test Methods for Carboxyl Content of Cellulose
  • D1929 - 20 Test Method for Determining Ignition Temperature of Plastics
  • D1932 - 19 Test Method for Thermal Endurance of Flexible Electrical Insulating Varnishes
  • D1933 - 03(2017) Specification for Nitrogen Gas as an Electrical Insulating Material
  • D1934 - 20 Test Method for Oxidative Aging of Electrical Insulating Liquids by Open-Beaker Method
  • D1937 - 18 Test Method for Carbon Black, Pelleted—Mass Strength
  • D1938 - 19 Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
  • D1941 - 91(2013) Test Method for Open Channel Flow Measurement of Water with the Parshall Flume
  • D1943 - 20 Test Method for Alpha Particle Radioactivity of Water 
  • D1945 - 14(2019) Test Method for Analysis of Natural Gas by Gas Chromatography
  • D1946 - 90(2019) Practice for Analysis of Reformed Gas by Gas Chromatography
  • D1968 - 19 Terminology Relating to Paper and Paper Products
  • D1969 - 07(2012) Specification for 2-Ethylhexanol
  • D1970/D1970M - 20 Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection
  • D1971 - 16 Practices for Digestion of Water Samples for Determination of Metals by Flame Atomic Absorption, Graphite Furnace Atomic Absorption, Plasma Emission Spectroscopy, or Plasma Mass Spectrometry
  • D1974/D1974M - 16 Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes
  • D1975 - 16 Test Method for Environmental Stress Crack Resistance of Plastic Injection Molded Open Head Pails
  • D1976 - 20 Test Method for Elements in Water by Inductively-Coupled Plasma Atomic Emission Spectroscopy
  • D1977 - 16 Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis
  • D1978 - 91(2018) Guide for Analysis of Electrocoat Bath Samples
  • D1981 - 11(2020)e1 Test Method for Measuring Color After Heating of Tall Oil Fatty Acids
  • D1982 - 13(2017) Test Method for Titer of Fatty Acids
  • D1985 - 13(2019) Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks
  • D1986 - 14 Test Method for Determining the Apparent Viscosity of Polyethylene Wax
  • D1987 - 18 Test Method for Biological Clogging of Geotextile or Soil/Geotextile Filters
  • D1988 - 20 Test Method for Mercaptans in Natural Gas Using Length-of-Stain Detector Tubes
  • D1990 - 19 Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens
  • D1991 - 15(2019) Test Method for Rubber Chemicals—2-Mercaptobenzothiazole (MBT)—Assay
  • D1992 - 17 Guide for Testing Synthetic Plasticizers Used in Rubber
  • D1993 - 18 Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
  • D1994 - 07(2015) Test Method for Determination of Acid Numbers of Hot-Melt Adhesives
  • D1995 - 92(2017) Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives)
  • D1997 - 20 Test Method for Laboratory Determination of the Fiber Content of Peat and Organic Soils by Dry Mass
  • D1998 - 15 Specification for Polyethylene Upright Storage Tanks
  • D2000 - 18 Classification System for Rubber Products in Automotive Applications[2]

D2001-D3000[edit]

  • D2001 - 07(2017) Test Method for Depentanization of Gasoline and Naphthas
  • D2007 - 19 Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method
  • D2008 - 12(2018) Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
  • D2010/D2010M - 98(2017) Test Methods for Evaluation of Total Sulfation Activity in the Atmosphere by the Lead Dioxide Technique
  • D2013/D2013M - 20 Practice for Preparing Coal Samples for Analysis
  • D2014/D2014M - 20 Test Method for Expansion or Contraction of Coal by the Sole-Heated Oven
  • D2022 - 89(2016) Test Methods of Sampling and Chemical Analysis of Chlorine-Containing Bleaches
  • D2023 - 89(2016) Test Method of Analysis for Sodium Toluene Sulfonate in Detergents
  • D2024 - 09(2017) Test Method for Cloud Point of Nonionic Surfactants
  • D2026/D2026M - 15 Specification for Cutback Asphalt (Slow-Curing Type)
  • D2027/D2027M - 19 Specification for Cutback Asphalt (Medium-Curing Type)
  • D2028/D2028M - 15 Specification for Cutback Asphalt (Rapid-Curing Type)
  • D2029 - 97(2017) Test Methods for Water Vapor Content of Electrical Insulating Gases by Measurement of Dew Point
  • D2035 - 19 Practice for Coagulation-Flocculation Jar Test of Water
  • D2036 - 09(2015) Test Methods for Cyanides in Water
  • D2041/D2041M - 19 Test Method for Theoretical Maximum Specific Gravity and Density of Asphalt Mixtures
  • D2042 - 15 Test Method for Solubility of Asphalt Materials in Trichloroethylene
  • D2047 - 17 Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James Machine
  • D2048 - 17 Test Method for Powdering of Floor Polish Films
  • D2050 - 19 Terminology Relating to Subassemblies Used in the Manufacture of Textiles
  • D2051 - 14 Test Method for Durability of Finish of Zippers to Laundering
  • D2052 - 05(2015) Test Method for Colorfastness of Zippers to Drycleaning
  • D2053 - 99(2015) Test Method for Colorfastness of Zippers to Light
  • D2054 - 99(2015) Test Method for Colorfastness of Zipper Tapes to Crocking
  • D2057 - 05(2015) Test Method for Colorfastness of Zippers to Laundering
  • D2058 - 03(2014) Test Method for Durability of Finish of Zippers to Drycleaning
  • D2059/D2059M - 03(2014) Test Method for Resistance of Zippers to Salt Spray (Fog)
  • D2060 - 14e1 Test Methods for Measuring Zipper Dimensions
  • D2061 - 07(2013) Test Methods for Strength Tests for Zippers
  • D2062 - 03(2014) Test Methods for Operability of Zippers
  • D2063/D2063M - 10(2018) Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures Using Non-Automated (Manual) Torque Testing Equipment
  • D2064 - 91(2016) Test Method for Print Resistance of Architectural Paints
  • D2065 - 03(2017) Test Method for Determination of Edge Performance of Composite Wood Products Under Surfactant Accelerated Moisture Stress
  • D2066 - 07(2020) Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions
  • D2067 - 97(2020) Test Method for Coarse Particles in Printing Ink Dispersions
  • D2068 - 20 Test Method for Determining Filter Blocking Tendency
  • D2070 - 16e1 Test Method for Thermal Stability of Hydraulic Oils
  • D2074 - 07(2019) Test Methods for Total, Primary, Secondary, and Tertiary Amine Values of Fatty Amines by Alternative Indicator Method
  • D2084 - 19a Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter
  • D2086 - 08(2012) Test Method for Acidity in Vinyl Acetate and Acetaldehyde
  • D2087 - 06(2012) Test Method for Iron in Formaldehyde Solutions
  • D2091 - 96(2017) Test Method for Print Resistance of Lacquers
  • D2093 - 03(2017) Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding
  • D2094 - 00(2014) Practice for Preparation of Bar and Rod Specimens for Adhesion Tests
  • D2095 - 96(2015) Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens
  • D2096 - 11(2019)e1 Test Method for Colorfastness and Transfer of Color in the Washing of Leather
  • D2097 - 03(2016) Test Method for Flex Testing of Finish on Upholstery Leather
  • D2098 - 13 Test Method for Dynamic Water Resistance of Shoe Upper Leather by the Dow Corning Leather Tester
  • D2099 - 14 Test Method for Dynamic Water Resistance of Shoe Upper Leather by the Maeser Water Penetration Tester
  • D2100/D2100M - 95(2017) Specification for Asbestos Textiles Used for Electrical Insulating Purposes
  • D2102 - 02(2018) Test Method for Shrinkage of Textile Fibers (Bundle Test)
  • D2103 - 15 Specification for Polyethylene Film and Sheeting
  • D2105 - 01(2019) Test Method for Longitudinal Tensile Properties of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
  • D2106 - 07(2017) Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents
  • D2108 - 10(2020) Test Method for Color of Halogenated Organic Solvents and Their Admixtures (Platinum-Cobalt Scale)
  • D2109 - 01(2016) Test Methods for Nonvolatile Matter in Halogenated Organic Solvents and Their Admixtures
  • D2110 - 00(2017) Test Method for pH of Water Extractions of Halogenated Organic Solvents and Their Admixtures
  • D2111 - 10(2020) Test Methods for Specific Gravity and Density of Halogenated Organic Solvents and Their Admixtures
  • D2112 - 15 Test Method for Oxidation Stability of Inhibited Mineral Insulating Oil by Pressure Vessel
  • D2113 - 14 Practice for Rock Core Drilling and Sampling of Rock for Site Exploration
  • D2115 - 17 Practice for Oven Heat Stability of Poly(Vinyl Chloride) Compositions
  • D2116 - 16 Specification for FEP Resin Molding and Extrusion Materials
  • D2118 - 18 Practice for Assigning a Standard Commercial Moisture Content for Wool and its Products
  • D2119 - 19 Test Method for Aldehydes in Styrene Monomer
  • D2121 - 16 Test Methods for Polymer Content of Styrene Monomer
  • D2122 - 16 Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
  • D2126 - 20 Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
  • D2129 - 17 Test Method for Color of Clear Electrical Insulating Liquids (Platinum-Cobalt Scale)
  • D2130 - 13 Test Method for Diameter of Wool and Other Animal Fibers by Microprojection
  • D2131 - 97(2016) Classification for Natural Muscovite Mica Splittings
  • D2132 - 19 Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials
  • D2134 - 19 Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker
  • D2136 - 19 Test Method for Coated Fabrics—Low-Temperature Bend Test
  • D2137 - 11(2018) Test Methods for Rubber Property—Brittleness Point of Flexible Polymers and Coated Fabrics
  • D2140 - 08(2017) Practice for Calculating Carbon-Type Composition of Insulating Oils of Petroleum Origin
  • D2143 - 15 Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
  • D2144 - 07(2013) Practices for Examination of Electrical Insulating Oils by Infrared Absorption
  • D2148 - 19e1 Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation
  • D2149 - 13 Test Method for Permittivity (Dielectric Constant) And Dissipation Factor Of Solid Ceramic Dielectrics At Frequencies To 10 MHz And Temperatures To 500°C
  • D2152 - 17 Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
  • D2155 - 18 Test Method for Determination of Fire Resistance of Aircraft Hydraulic Fluids by Autoignition Temperature
  • D2156 - 09(2018) Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels
  • D2157 - 18 Test Method for Effect of Air Supply on Smoke Density in Flue Gases from Burning Distillate Fuels
  • D2158 - 16ae1 Test Method for Residues in Liquefied Petroleum (LP) Gases
  • D2161 - 19 Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
  • D2162 - 17 Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards
  • D2163 - 14(2019) Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography
  • D2165 - 94(2012)e1 Test Method for pH of Aqueous Extracts of Wool and Similar Animal Fibers
  • D2166/D2166M - 16 Test Method for Unconfined Compressive Strength of Cohesive Soil
  • D2167 - 15 Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method
  • D2168 - 10(2018) Practices for Calibration of Laboratory Mechanical-Rammer Soil Compactors
  • D2170/D2170M - 18 Test Method for Kinematic Viscosity of Asphalts
  • D2171/D2171M - 18 Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer
  • D2172/D2172M - 17e1 Test Methods for Quantitative Extraction of Asphalt Binder from Asphalt Mixtures
  • D2176 - 16 Test Method for Folding Endurance of Paper and Plastics Film by the M.I.T. Tester
  • D2178/D2178M - 15a Specification for Asphalt Glass Felt Used in Roofing and Waterproofing
  • D2180 - 17 Test Method for Active Oxygen in Bleaching Compounds
  • D2187 - 17 Test Methods and Practices for Evaluating Physical and Chemical Properties of Particulate Ion-Exchange Resins
  • D2190 - 07(2013) Specification for Vinyl Acetate
  • D2191 - 06(2012) Test Method for Acetaldehyde Content of Vinyl Acetate
  • D2192 - 06(2012) Test Method for Purity of Aldehydes and Ketones
  • D2193 - 06(2012) Test Method for Hydroquinone in Vinyl Acetate
  • D2194 - 02(2012) Test Method for Concentration of Formaldehyde Solutions
  • D2196 - 20 Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
  • D2197 - 16 Test Method for Adhesion of Organic Coatings by Scrape Adhesion
  • D2199 - 03(2013) Test Method for Measurement of Plasticizer Migration From Vinyl Fabrics to Lacquers
  • D2200 - 17 Practice for Use of Pictorial Surface Preparation Standards and Guides for Painting Steel Surfaces
  • D2201 - 18 Practice for Preparation of Zinc-Coated and Zinc-Alloy-Coated Steel Panels for Testing Paint and Related Coating Products
  • D2202 - 00(2019) Test Method for Slump of Sealants
  • D2203 - 01(2018) Test Method for Staining from Sealants
  • D2205 - 20 Guide for Selection of Tests for Traffic Paints
  • D2207 - 00(2015) Test Method for Bursting Strength of Leather by the Ball Method
  • D2208 - 16 Test Method for Breaking Strength of Leather by the Grab Method
  • D2209 - 00(2015) Test Method for Tensile Strength of Leather
  • D2210 - 13 Test Method for Grain Crack and Extension of Leather by the Mullen Test
  • D2211 - 00(2015) Test Method for Elongation of Leather
  • D2212 - 00(2015) Test Method for Slit Tear Resistance of Leather
  • D2213 - 00(2020) Test Method for Compressibility of Leather
  • D2216 - 19 Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
  • D2218 - 67(2019) Specification for Molybdate Orange Pigments
  • D2219 - 17 Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60°C Operation
  • D2220 - 17 Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 75°C Operation
  • D2221 - 01(2015) Test Method for Creep Properties of Package Cushioning Materials
  • D2222 - 19 Test Method for Methanol Extract of Vinyl Chloride Resins
  • D2225 - 20 Test Methods for Silicone Liquids Used for Electrical Insulation
  • D2226 - 93(2018) Classification for Various Types of Petroleum Oils for Rubber Compounding Use
  • D2227 - 96(2020) Specification for Natural Rubber (NR) Technical Grades
  • D2228 - 04(2019) Test Method for Rubber Property—Relative Abrasion Resistance by Pico Abrader Method
  • D2229 - 10(2014) Test Method for Adhesion Between Steel Tire Cords and Rubber
  • D2230 - 17 Test Method for Rubber Property—Extrudability of Unvulcanized Compounds
  • D2232 - 14(2018) Test Method for Evaporating Residue of Naphthalene
  • D2234/D2234M - 20 Practice for Collection of a Gross Sample of Coal
  • D2235 - 04(2016) Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings
  • D2238 - 92(2012)e1 Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm−1
  • D2239 - 12a(2020) Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
  • D2240 - 15e1 Test Method for Rubber Property—Durometer Hardness
  • D2241 - 20 Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
  • D2243 - 20 Test Method for Freeze-Thaw Resistance of Water-Borne Coatings
  • D2244 - 16 Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
  • D2247 - 15(2020) Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity
  • D2248 - 01a(2018) Practice for Detergent Resistance of Organic Finishes
  • D2251 - 10(2020) Test Method for Metal Corrosion by Halogenated Organic Solvents and Their Admixtures
  • D2252 - 18 Specification for Fineness of Types of Alpaca
  • D2255/D2255M - 09(2020) Test Method for Grading Spun Yarns for Appearance
  • D2256/D2256M - 10(2015) Test Method for Tensile Properties of Yarns by the Single-Strand Method
  • D2257 - 20 Test Method for Extractable Matter in Textiles
  • D2258/D2258M - 16 Practice for Sampling Yarn for Testing
  • D2259 - 02(2016)e1 Test Method for Shrinkage of Yarns
  • D2260 - 03(2018) Tables of Conversion Factors and Equivalent Yarn Numbers Measured in Various Numbering Systems
  • D2261 - 13(2017)e1 Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
  • D2265 - 20 Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range
  • D2266 - 01(2015) Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method)
  • D2268 - 93(2017) Test Method for Analysis of High-Purity n-Heptane and Isooctane by Capillary Gas Chromatography
  • D2269 - 10(2020) Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption
  • D2270 - 10(2016) Practice for Calculating Viscosity Index from Kinematic Viscosity at 40 °C and 100 °C
  • D2272 - 14a Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
  • D2273 - 08(2016) Test Method for Trace Sediment in Lubricating Oils
  • D2274 - 14(2019) Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
  • D2275 - 14 Test Method for Voltage Endurance of Solid Electrical Insulating Materials Subjected to Partial Discharges (Corona) on the Surface
  • D2276 - 06(2014) Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
  • D2281 - 10(2016) Test Method for Evaluation of Wetting Agents by the Skein Test
  • D2284 - 11(2019) Test Method for Acidity of Sulfur Hexafluoride
  • D2287 - 19 Classification System and Basis for Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds
  • D2290 - 19a Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe
  • D2291/D2291M - 16 Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites
  • D2293 - 96(2016) Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal)
  • D2294 - 96(2016) Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
  • D2295 - 96(2016) Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
  • D2300 - 08(2017) Test Method for Gassing of Electrical Insulating Liquids Under Electrical Stress and Ionization (Modified Pirelli Method)
  • D2301 - 10(2017) Specification for Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
  • D2303 - 20 Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials
  • D2304 - 18 Test Method for Thermal Endurance of Rigid Electrical Insulating Materials
  • D2305 - 18 Test Methods for Polymeric Films Used for Electrical Insulation
  • D2307 - 07a(2013) Test Method for Thermal Endurance of Film-Insulated Round Magnet Wire
  • D2308 - 07(2020)e1 Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable
  • D2318 - 20 Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch
  • D2319/D2319M - 20 Test Method for Softening Point of Pitch (Cube-in-Air Method)
  • D2320 - 98(2017) Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
  • D2321 - 20 Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
  • D2322 - 14 Test Method for Resistance of Shoe Upper Leather to Artificial Perspiration
  • D2330 - 20 Test Method for Methylene Blue Active Substances
  • D2331 - 08(2013) Practices for Preparation and Preliminary Testing of Water-Formed Deposits
  • D2332 - 13 Practice for Analysis of Water-Formed Deposits by Wavelength-Dispersive X-Ray Fluorescence
  • D2339 - 20 Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading
  • D2340 - 18 Test Method for Peroxides in Styrene Monomer
  • D2343 - 17 Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics
  • D2344/D2344M - 16 Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
  • D2346 - 13 Test Method for Apparent Density of Leather
  • D2347 - 00(2015) Test Method for Measuring Area of Leather Test Specimens
  • D2349 - 90(2020) Test Method for Qualitative Determination of Nature of Solvent Composition in Solvent-Reducible Paints
  • D2350 - 90(2015) Test Method for Antimony Oxide in White Pigment Separated From Solvent-Reducible Paints
  • D2351 - 90(2015) Test Method for Sulfide in White Pigment Separated from Solvent-Reducible Paints
  • D2352 - 85(2015) Test Method for Sulfur Dioxide in White Pigment Separated from Solvent-Reducible Paints
  • D2354 - 10(2018) Test Method for Minimum Film Formation Temperature (MFFT) of Emulsion Vehicles
  • D2357 - 11(2016) for Qualitative Classification of Surfactants by Infrared Absorption
  • D2358 - 16 Test Method for Separation of Active Ingredient from Surfactant and Syndet Compositions
  • D2359 - 19 Specification for Refined Benzene-535
  • D2363 - 79(2019) Test Methods for Hydroxypropyl Methylcellulose
  • D2364 - 15 Test Methods for Hydroxyethylcellulose
  • D2369 - 20 Test Method for Volatile Content of Coatings
  • D2370 - 16 Test Method for Tensile Properties of Organic Coatings
  • D2371 - 19 Test Method for Pigment Content of Solvent-Reducible Paints
  • D2372 - 85(2015) Practice for Separation of Vehicle From Solvent-Reducible Paints
  • D2377 - 14(2019) Test Method for Tack-Free Time of Caulking Compounds and Sealants
  • D2378 - 07(2012) Specification for Formaldehyde 50 % Grade Uninhibited and 37 % Grade Inhibited and Uninhibited
  • D2379 - 09(2017) Test Method for Acidity of Formaldehyde Solutions
  • D2380 - 04(2019) Test Method for Methanol Content of Formaldehyde Solutions
  • D2383 - 19 Test Method for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds Under Humid Conditions
  • D2384 - 19 Test Methods for Traces of Volatile Chlorides in Butane-Butene Mixtures
  • D2386 - 19 Test Method for Freezing Point of Aviation Fuels
  • D2392 - 15 Test Method for Color of Dyed Aviation Gasolines
  • D2394 - 17 Test Methods for Simulated Service Testing of Wood and Wood-Based Finish Flooring
  • D2395 - 17 Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials
  • D2396 - 20 Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
  • D2397/D2397M - 20 Specification for Cationic Emulsified Asphalt
  • D2399 - 12(2017)e1 Practice for Selection of Cutback Asphalts
  • D2402 - 07(2018) Test Method for Water Retention of Textile Fibers (Centrifuge Procedure)
  • D2412 - 11(2018) Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
  • D2413 - 16 Practice for Preparation of Insulating Paper and Board Impregnated with a Liquid Dielectric
  • D2414 - 19 Test Method for Carbon Black—Oil Absorption Number (OAN)
  • D2415 - 20 Test Method for Ash in Coal Tar and Pitch
  • D2416 - 20 Test Method for Coking Value of Tar and Pitch (Modified Conradson)
  • D2419 - 14 Test Method for Sand Equivalent Value of Soils and Fine Aggregate
  • D2420 - 13(2018) Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)
  • D2421 - 19 Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis
  • D2422 - 97(2018) Classification of Industrial Fluid Lubricants by Viscosity System
  • D2423 - 90(2017) Test Method for Surface Wax on Waxed Paper or Paperboard
  • D2425 - 19 Test Method for Hydrocarbon Types in Middle Distillates by Mass Spectrometry
  • D2426 - 19 Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography
  • D2427 - 06(2019) Test Method for Determination of C2 through C5 Hydrocarbons in Gasolines by Gas Chromatography
  • D2434 - 19 Test Method for Permeability of Granular Soils (Constant Head)
  • D2435/D2435M - 11(2020) Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading
  • D2439 - 20 Specification for Refined Phenol
  • D2440 - 13 Test Method for Oxidation Stability of Mineral Insulating Oil
  • D2442 - 75(2020) Specification for Alumina Ceramics for Electrical and Electronic Applications
  • D2444 - 19 Practice for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
  • D2448 - 85(2019) Test Method for Water-Soluble Salts in Pigments by Measuring the Specific Resistance of the Leachate of the Pigment
  • D2449 - 88(2020) Specification for Rubber Bales From Natural Sources—Limit on Coating
  • D2452 - 15(2019) Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds
  • D2453 - 15(2020)e1 Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds
  • D2454 - 18 Practice for Determining the Effect of Overbaking on Organic Coatings
  • D2457 - 13 Test Method for Specular Gloss of Plastic Films and Solid Plastics
  • D2460 - 07(2013) Test Method for Alpha-Particle-Emitting Isotopes of Radium in Water
  • D2462 - 13 Test Method for Moisture in Wool by Distillation With Toluene
  • D2463 - 15 Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers
  • D2464 - 15 Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
  • D2466 - 17 Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
  • D2467 - 20 Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
  • D2472 - 15 Specification for Sulfur Hexafluoride
  • D2475 - 01(2013) Specification for Felt
  • D2477 - 07(2020) Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Insulating Gases at Commercial Power Frequencies
  • D2485 - 18 Test Methods for Evaluating Coatings For High Temperature Service
  • D2486 - 17 Test Methods for Scrub Resistance of Wall Paints
  • D2487 - 17e1 Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
  • D2488 - 17e1 Practice for Description and Identification of Soils (Visual-Manual Procedures)
  • D2489/D2489M - 16 Test Method for Estimating Degree of Particle Coating of Asphalt Mixtures
  • D2492 - 02(2012) Test Method for Forms of Sulfur in Coal
  • D2493/D2493M - 16 Practice for Viscosity-Temperature Chart for Asphalt Binders
  • D2494 - 13(2020) Test Method for Commercial Mass of a Shipment of Yarn or Manufactured Staple Fiber or Tow
  • D2495 - 07(2019) Test Method for Moisture in Cotton by Oven-Drying
  • D2497 - 07(2018) Tolerances for Manufactured Organic-Base Filament Single Yarns
  • D2500 - 17a Test Method for Cloud Point of Petroleum Products and Liquid Fuels
  • D2501 - 14(2019) Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils
  • D2502 - 14(2019)e1 Test Method for Estimation of Mean Relative Molecular Mass of Petroleum Oils from Viscosity Measurements
  • D2503 - 92(2016) Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
  • D2504 - 88(2015) Test Method for Noncondensable Gases in C2 and Lighter Hydrocarbon Products by Gas Chromatography
  • D2505 - 88(2015) Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography
  • D2509 - 20a Test Method for Measurement of Load-Carrying Capacity of Lubricating Grease (Timken Method)
  • D2510 - 94(2017) Test Method for Adhesion of Solid Film Lubricants
  • D2511 - 20 Test Method for Thermal Shock Sensitivity of Solid Film Lubricants
  • D2512 - 17 Test Method for Compatibility of Materials with Liquid Oxygen (Impact Sensitivity Threshold and Pass-Fail Techniques)
  • D2513 - 20 Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
  • D2517 - 18 Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
  • D2519 - 19a Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test
  • D2520 - 13 Test Methods for Complex Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials at Microwave Frequencies and Temperatures to 1650oC
  • D2521/D2521M - 76(2021) Specification for Asphalt Used in Canal, Ditch, and Pond Lining
  • D2523/D2523M - 13(2019)e1 Practice for Testing Load-Strain Properties of Roofing Membranes
  • D2524 - 13 Test Method for Breaking Tenacity of Wool Fibers, Flat Bundle Method— 18-in. (3.2-mm) Gage Length
  • D2525 - 13 Practice for Sampling Wool for Moisture
  • D2527 - 83(2017) Specification for Rubber Seals—Splice Strength
  • D2532 - 17 Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants
  • D2534 - 88(2017) Test Method for Coefficient of Kinetic Friction for Wax Coatings
  • D2538 - 18 Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer
  • D2549 - 02(2017) Test Method for Separation of Representative Aromatics and Nonaromatics Fractions of High-Boiling Oils by Elution Chromatography
  • D2555 - 17a Practice for Establishing Clear Wood Strength Values
  • D2556 - 14(2018) Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties Using Rotational Viscometry
  • D2557 - 98(2017) Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from −267.8 to −55°C (−450 to −67°F)
  • D2559 - 12a(2018) Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions
  • D2561 - 17 Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers
  • D2562 - 94(2015) Practice for Classifying Visual Defects in Parts Molded from Reinforced Thermosetting Plastics
  • D2563 - 08(2015) Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts
  • D2564 - 20 Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems
  • D2565 - 16 Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications
  • D2570 - 16 Test Method for Simulated Service Corrosion Testing of Engine Coolants
  • D2572 - 19 Test Method for Isocyanate Groups in Urethane Materials or Prepolymers
  • D2573/D2573M - 18 Test Method for Field Vane Shear Test in Saturated Fine-Grained Soils
  • D2574 - 16(2020)e1 Test Method for Resistance of Emulsion Paints in the Container to Attack by Microorganisms
  • D2578 - 17 Test Method for Wetting Tension of Polyethylene and Polypropylene Films
  • D2580 - 06(2012) Test Method for Phenols in Water by Gas-Liquid Chromatography
  • D2582 - 16 Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting
  • D2583 - 13a Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
  • D2584 - 18 Test Method for Ignition Loss of Cured Reinforced Resins
  • D2589/D2589M - 88(2019) Test Method for McNett Wet Classification of Dual Asbestos Fiber
  • D2590/D2590M - 98(2019) Test Method for Sampling Chrysotile Asbestos
  • D2591 - 07(2020) Test Method for Linear Density of Elastomeric Yarns (Short Length Specimens)
  • D2593 - 19 Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography
  • D2594 - 20 Test Method for Stretch Properties of Knitted Fabrics Having Low Power
  • D2595 - 17 Test Method for Evaporation Loss of Lubricating Greases Over Wide-Temperature Range
  • D2596 - 20 Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)
  • D2598 - 16 Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis
  • D2603 - 20 Test Method for Sonic Shear Stability of Polymer-Containing Oils
  • D2609 - 15 Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
  • D2612 - 99(2018) Test Method for Fiber Cohesion in Sliver and Top (Static Tests)
  • D2613 - 01(2017) Test Method for Calcium or Zinc in Paint Driers by EDTA Method
  • D2616 - 19 Test Method for Evaluation of Visual Color Difference With a Gray Scale
  • D2617 - 17a Test Method for Total Ash in Leather
  • D2619 - 09(2014) Test Method for Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method)
  • D2621 - 87(2016) Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
  • D2622 - 16 Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
  • D2624 - 15 Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
  • D2625 - 20 Test Method for Endurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants (Falex Pin and Vee Method)
  • D2626/D2626M - 04(2020) Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing
  • D2627 - 08(2012) Specification for Diacetone Alcohol
  • D2628 - 91(2016) Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
  • D2632 - 15(2019) Test Method for Rubber Property—Resilience by Vertical Rebound
  • D2633 - 20 Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable
  • D2634 - 07(2013) Specification for Methyl Amyl Acetate (95 % Grade)
  • D2635 - 07(2012) Specification for Methyl Isobutyl Carbinol
  • D2636 - 07(2012) Specification for Hexylene Glycol
  • D2638 - 21 Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer
  • D2639/D2639M - 19 Test Method for Plastic Properties of Coal by the Constant-Torque Gieseler Plastometer
  • D2643/D2643M - 08(2019) Specification for Prefabricated Bituminous Geomembrane Used as Canal and Ditch Liner (Exposed Type)
  • D2644 - 12(2018) Tolerances for Yarns Spun on the Woolen System
  • D2645 - 07(2018) Tolerances for Yarns Spun on the Cotton or Worsted Systems
  • D2646 - 18 Guide for Backing Fabric Characteristics of Pile Yarn Floor Coverings
  • D2647 - 18 Specification for Crosslinkable Ethylene Plastics
  • D2649 - 20a Test Method for Corrosion Characteristics of Solid Film Lubricants
  • D2650 - 10(2015) Test Method for Chemical Composition of Gases by Mass Spectrometry
  • D2651 - 01(2016) Guide for Preparation of Metal Surfaces for Adhesive Bonding
  • D2652 - 11(2020) Terminology Relating to Activated Carbon
  • D2653 - 07(2018) Test Method for Tensile Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
  • D2655 - 19 Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V, 90°C Operation
  • D2656 - 20 Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 2001 to 35 000 V
  • D2657 - 07(2015) Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings
  • D2658 - 18 Test Method for Determining Dimensions of Fiberboard Boxes
  • D2659 - 16 Test Method for Column Crush Properties of Blown Thermoplastic Containers
  • D2661 - 14e1 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
  • D2663 - 14(2019) Test Methods for Carbon Black—Dispersion in Rubber
  • D2665 - 20 Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
  • D2668 - 07(2013) Test Method for 2,6-di-tert-Butyl- p-Cresol and 2,6-di-tert-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption
  • D2669 - 16 Test Method for Apparent Viscosity of Petroleum Waxes Compounded with Additives (Hot Melts)
  • D2670 - 20 Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method)
  • D2671 - 13 Test Methods for Heat-Shrinkable Tubing for Electrical Use
  • D2672 - 20 Specification for Joints for IPS PVC Pipe Using Solvent Cement
  • D2673 - 14 Specification for Oriented Polypropylene Film
  • D2674 - 72(2012) Methods of Analysis of Sulfochromate Etch Solution Used in Surface Preparation of Aluminum
  • D2680 - 20 Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
  • D2683 - 20 Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
  • D2684/D2684M - 15 Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products
  • D2685 - 11(2019) Test Method for Air and Carbon Tetrafluoride in Sulfur Hexafluoride by Gas Chromatography
  • D2686 - 19 Specification for Polytetrafluoroethylene-Backed Pressure-Sensitive Electrical Insulating Tape
  • D2687 - 95(2016) Practices for Sampling Particulate Ion-Exchange Materials
  • D2688 - 15e1 Test Method for Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Method)
  • D2692/D2692M - 15 Test Method for Air Permeability of Tire Fabrics, Tire Cord Fabrics, Tire Cord, and Yarns
  • D2693 - 07(2012) Specification for Ethylene Glycol
  • D2694 - 05(2019) Specification for Diethylene Glycol,
  • D2697 - 03(2014) Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
  • D2698 - 05(2015) Test Method for Determination of the Pigment Content of Solvent-Reducible Paints by High-Speed Centrifuging
  • D2699 - 19e1 Test Method for Research Octane Number of Spark-Ignition Engine Fuel
  • D2700 - 19e1 Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
  • D2702 - 05(2016) Practice for Rubber Chemicals—Determination of Infrared Absorption Characteristics
  • D2709 - 16 Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
  • D2710 - 20 Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration
  • D2711 - 17 Test Method for Demulsibility Characteristics of Lubricating Oils
  • D2712 - 20 Test Method for Determination of Hydrocarbon Impurities in High Purity Propylene by Gas Chromatography
  • D2713 - 20 Test Method for Dryness of Propane (Valve Freeze Method)
  • D2714 - 94(2019) Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine
  • D2718 - 18 Test Methods for Structural Panels in Planar Shear (Rolling Shear)
  • D2719 - 19 Test Methods for Wood Structural Panels in Shear Through-the-Thickness
  • D2720 - 94(2012)e1 Practice for Calculation of Commercial Weight and Yield of Scoured Wool, Top, and Noil for Various Commercial Compositions
  • D2724 - 19 Test Method for Bond Strength of Bonded, Fused, and Laminated Apparel Fabrics
  • D2726/D2726M - 19 Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Asphalt Mixtures
  • D2728 - 98(2019) Practice for Paving Uses and Application Temperatures for Road Tars
  • D2729 - 17 Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
  • D2731 - 15 Test Method for Elastic Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
  • D2732 - 14(2020) Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting
  • D2734 - 16 Test Methods for Void Content of Reinforced Plastics
  • D2737 - 12a(2020) Specification for Polyethylene (PE) Plastic Tubing
  • D2745 - 00(2017) Test Method for Relative Tinting Strength of White Pigments by Reflectance Measurements
  • D2746/D2746M - 18 Test Method for Staining Tendency of Asphalt (Stain Index)
  • D2749 - 13 Symbols for Dimensions of Plastic Pipe Fittings
  • D2752/D2752M - 88(2019) Test Methods for Air Permeability of Asbestos Fibers
  • D2754 - 10(2016) Specification for High-Temperature Glass Cloth Pressure-Sensitive Electrical Insulating Tape
  • D2756 - 07(2017) Test Method for Weight Loss of Electrical Insulating Varnishes
  • D2758 - 94(2009) Test Method for Engine Coolants by Engine Dynamometer
  • D2759 - 00(2017) Practice for Sampling Gas from a Transformer Under Positive Pressure
  • D2764 - 20 Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch
  • D2765 - 16 Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics
  • D2774 - 20 Practice for Underground Installation of Thermoplastic Pressure Piping
  • D2777 - 13 Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
  • D2779 - 92(2020) Test Method for Estimation of Solubility of Gases in Petroleum Liquids
  • D2782 - 20 Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method)
  • D2783 - 19 Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)
  • D2786 - 91(2016) Test Method for Hydrocarbon Types Analysis of Gas-Oil Saturates Fractions by High Ionizing Voltage Mass Spectrometry
  • D2789 - 95(2016) Test Method for Hydrocarbon Types in Low Olefinic Gasoline by Mass Spectrometry
  • D2791 - 19 Test Method for On-Line Determination of Sodium in Water
  • D2792 - 17 Practice for Solvent and Fuel Resistance of Traffic Paint
  • D2793 - 99(2017) Test Method for Block Resistance of Organic Coatings on Wood Panel Substrates
  • D2794 - 93(2019) Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
  • D2797/D2797M - 20a Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light
  • D2798 - 20 Test Method for Microscopical Determination of the Vitrinite Reflectance of Coal
  • D2799 - 13 Test Method for Microscopical Determination of the Maceral Composition of Coal
  • D2803 - 09(2020) Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal
  • D2804 - 02(2012) Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography
  • D2805 - 11(2018) Test Method for Hiding Power of Paints by Reflectometry
  • D2807 - 17a Test Method for Chromic Oxide in Leather (Perchloric Acid Oxidation)
  • D2809 - 09(2017) Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
  • D2810 - 18 Test Method for pH of Leather
  • D2812 - 07(2021) Test Method for Non-Lint Content of Cotton
  • D2813 - 03(2013) Practice for Sampling Leather for Physical and Chemical Tests
  • D2816 - 18 Test Method for Cashmere Coarse-Hair Content in Cashmere
  • D2817 - 18 Specification for Maximum Cashmere Coarse-Hair Content in Cashmere
  • D2821 - 19 Test Method for Measuring the Relative Stiffness of Leather by Means of a Torsional Wire Apparatus
  • D2824/D2824M - 18 Specification for Aluminum-Pigmented Asphalt Roof Coatings, Nonfibered, and Fibered without Asbestos
  • D2825 - 17 Terminology Relating to Polishes and Related Materials
  • D2827 - 19 Specification for Styrene Monomer
  • D2829/D2829M - 07(2019)e1 Practice for Sampling and Analysis of Existing Built-Up Roof Systems
  • D2832 - 92(2016) Guide for Determining Volatile and Nonvolatile Content of Paint and Related Coatings
  • D2834 - 95(2015) Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor Polishes
  • D2835 - 89(2017) Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements
  • D2837 - 13e1 Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products
  • D2838 - 18 Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting
  • D2839 - 16 Practice for Use of a Melt Index Strand for Determining Density of Polyethylene
  • D2842 - 19 Test Method for Water Absorption of Rigid Cellular Plastics
  • D2843 - 19 Test Method for Density of Smoke from the Burning or Decomposition of Plastics
  • D2844/D2844M - 18 Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils
  • D2846/D2846M - 19a Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
  • D2847 - 15 Practice for Testing Engine Coolants in Car and Light Truck Service
  • D2850 - 15 Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils
  • D2851 - 15 Specification for Liquid Optical Adhesive
  • D2852 - 16 Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings
  • D2854 - 09(2019) Test Method for Apparent Density of Activated Carbon
  • D2855 - 20 Practice for the Two-Step (Primer and Solvent Cement) Method of Joining Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Piping Components with Tapered Sockets
  • D2857 - 16 Practice for Dilute Solution Viscosity of Polymers
  • D2859 - 16 Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials
  • D2860/D2860M - 18 Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90° Angle and Constant Stress
  • D2862 - 16 Test Method for Particle Size Distribution of Granular Activated Carbon
  • D2863 - 19 Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
  • D2864 - 20 Terminology Relating to Electrical Insulating Liquids and Gases
  • D2866 - 11(2018) Test Method for Total Ash Content of Activated Carbon
  • D2867 - 17 Test Methods for Moisture in Activated Carbon
  • D2868 - 17 Test Method for Nitrogen Content (Kjeldahl) and Hide Substance Content of Leather, Wet Blue and Wet White
  • D2872 - 19 Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
  • D2875 - 00(2020) Test Method for Insoluble Ash of Vegetable-Tanned Leather
  • D2876 - 00(2020) Test Method for Water-Soluble Matter of Vegetable-Tanned Leather
  • D2878 - 10(2016) Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils
  • D2879 - 18 Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
  • D2880 - 20 Specification for Gas Turbine Fuel Oils
  • D2881 - 19 Classification for Metalworking Fluids and Related Materials
  • D2885 - 20 Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
  • D2887 - 19ae2 Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
  • D2889 - 95(2019) Test Method for Calculation of True Vapor Pressures of Petroleum Distillate Fuels
  • D2890 - 92(2018) Test Method for Calculation of Liquid Heat Capacity of Petroleum Distillate Fuels
  • D2892 - 20 Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
  • D2893 - 19 Test Methods for Oxidation Characteristics of Extreme-Pressure Lubrication Oils
  • D2896 - 15 Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
  • D2898 - 10(2017) Practice for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing
  • D2899 - 12(2017) Practice for Establishing Allowable Stresses for Round Timber Piles
  • D2902 - 00(2013)e1 Specification for Fluoropolymer Resin Heat-Shrinkable Tubing for Electrical Insulation
  • D2903 - 18 Specification for Crosslinked Chlorinated Polyolefin Heat-Shrinkable Tubing for Electrical Insulation
  • D2908 - 91(2017) Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography
  • D2911/D2911M - 16 Specification for Dimensions and Tolerances for Plastic Bottles
  • D2913 - 20 Test Method for Mercaptan Content of the Atmosphere
  • D2914 - 15 Test Methods for Sulfur Dioxide Content of the Atmosphere (West-Gaeke Method)
  • D2915 - 17 Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products
  • D2916 - 09(2017) Specification for Isophorone
  • D2917 - 07(2013) Specification for Methyl Isoamyl Ketone
  • D2918 - 99(2020) Test Method for Durability Assessment of Adhesive Joints Stressed in Peel
  • D2919 - 01(2014) Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
  • D2921 - 98(2017) Test Method for Qualitative Tests for the Presence of Water Repellents and Preservatives in Wood Products
  • D2924 - 12(2017) Test Method for External Pressure Resistance of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
  • D2925 - 14(2019) Test Method for Beam Deflection of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow
  • D2929 - 89(2019)e1 Test Method for Sulfur Content of Cellulosic Materials by X-Ray Fluorescence
  • D2936 - 20 Test Method for Direct Tensile Strength of Intact Rock Core Specimens
  • D2937 - 17e2 Test Method for Density of Soil in Place by the Drive-Cylinder Method
  • D2940/D2940M - 20 Specification for Graded Aggregate Material for Bases or Subbases for Highways or Airports
  • D2941 - 13 Test Method for Measuring Break Pattern of Leather (Break Scale)
  • D2942 - 02(2018) Test Method for Total Acid Acceptance of Halogenated Organic Solvents (Nonreflux Methods)
  • D2944 - 14 Practice of Sampling Processed Peat Materials
  • D2946 - 01(2018) Terminology for Asbestos and Asbestos–Cement Products
  • D2947/D2947M - 88(2019) Test Method for Screen Analysis of Asbestos Fibers
  • D2949 - 18 Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
  • D2950/D2950M - 14 Test Method for Density of Bituminous Concrete in Place by Nuclear Methods
  • D2959 - 95(2017) Test Method for Ethylene Oxide Content of Polyethoxylated Nonionic Surfactants
  • D2961/D2961M - 19 Practice for Single-Stage Total Moisture Less than 15 % in Coal Reduced to 2.36 mm [No. 8 Sieve] Topsize
  • D2962 - 10(2019) Practice for Calculating Volume-Temperature Correction For Coal-Tar Pitches
  • D2967 - 07(2017) Test Method for Corner Coverage of Powder Coatings
  • D2968 - 13 Test Method for Med and Kemp Fibers in Wool and Other Animal Fibers by Microprojection
  • D2969 - 04(2014) Test Methods for Steel Tire Cords
  • D2970/D2970M - 04(2014) Test Methods for Testing Tire Cords, Tire Cord Fabrics, and Industrial Yarns Made From Glass Filaments
  • D2972 - 15 Test Methods for Arsenic in Water
  • D2973 - 16 Test Method for Total Nitrogen in Peat Materials
  • D2974 - 20e1 Test Methods for Determining the Water (Moisture) Content, Ash Content, and Organic Material of Peat and Other Organic Soils
  • D2976 - 15 Test Method for pH of Peat Materials
  • D2977 - 14 Practice for Particle Size Range of Peat Materials for Horticultural Purposes
  • D2978 - 15e1 Test Methods for Volume of Processed Peat Materials
  • D2980 - 17e1 Test Method for Saturated Density, Moisture-Holding Capacity, and Porosity of Saturated Peat Materials
  • D2981 - 94(2019) Test Method for Wear Life of Solid Film Lubricants in Oscillating Motion
  • D2982 - 07(2019) Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils
  • D2983 - 20 Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
  • D2985/D2985M - 92(2019) Test Method for Color of Asbestos
  • D2987/D2987M - 88(2019) Test Method for Moisture Content of Asbestos Fiber
  • D2988 - 96(2020) Test Methods for Water-Soluble Halide Ion in Halogenated Organic Solvents and Their Admixtures
  • D2989 - 01(2016) Test Method for Acidity-Alkalinity of Halogenated Organic Solvents and Their Admixtures
  • D2990 - 17 Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
  • D2992 - 18 Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
  • D2995 - 14 Practice for Estimating Application Rate and Residual Application Rate of Bituminous Distributors
  • D2996 - 17 Specification for Filament-Wound “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
  • D2997 - 15 Specification for Centrifugally Cast “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe[2]

D3001-D4000[edit]

  • D3003 - 01(2016) Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates
  • D3004 - 08(2020) Specification for Crosslinked and Thermoplastic Extruded Semi-Conducting, Conductor, and Insulation Shielding Materials
  • D3005 - 17 Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
  • D3006 - 10(2017) Specification for Polyethylene Plastic Pressure-Sensitive Electrical Insulating Tape
  • D3012 - 19 Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven
  • D3013 - 13 Specification for Epoxy Molding Compounds
  • D3014 - 19a Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position
  • D3016 - 97(2018) Practice for Use of Liquid Exclusion Chromatography Terms and Relationships
  • D3018/D3018M - 11(2017) Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
  • D3019/D3019M - 17 Specification for Lap Cement Used with Asphalt Roll Roofing, Non-Fibered, and Fibered
  • D3021 - 01(2019) Specification for Phthalocyanine Green Pigments
  • D3023 - 98(2017) Practice for Determination of Resistance of Factory-Applied Coatings on Wood Products to Stains and Reagents
  • D3025 - 07(2021) Practice for Standardizing Cotton Fiber Test Results by Use of Calibration Cotton Standards
  • D3030 - 17 Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins
  • D3032 - 16 Test Methods for Hookup Wire Insulation
  • D3034 - 16 Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
  • D3035 - 15 Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
  • D3038 - 93(2018) Test Method for Drop Shatter Test for Coke
  • D3039/D3039M - 17 Test Method for Tensile Properties of Polymer Matrix Composite Materials
  • D3042 - 17 Test Method for Insoluble Residue in Carbonate Aggregates
  • D3043 - 17 Test Methods for Structural Panels in Flexure
  • D3044 - 16 Test Method for Shear Modulus of Wood-Based Structural Panels
  • D3045 - 18 Practice for Heat Aging of Plastics Without Load
  • D3048 - 89(2016) Test Method of Assay for Alkaline Protease
  • D3049 - 89(2016) Test Method for Synthetic Anionic Ingredient by Cationic Titration
  • D3050 - 07(2015) Guide for Measuring Soil Removal from Artificially Soiled Fabrics (Not Suitable for Detergent Ranking)
  • D3052 - 17 Practice for Rating Water-Emulsion Floor Polishes
  • D3053 - 20a Terminology Relating to Carbon Black
  • D3056 - 14(2018) Test Method for Gel Time of Solventless Varnishes
  • D3060 - 94(2013) Test Method for Pressure Drop Rate of Compressed Gas-Propelled Products
  • D3061 - 97(2013) Guide for Three-Piece Steel and Tinplate Straight-Wall and Necked-In Aerosol Cans
  • D3064 - 97(2013) Terminology Relating To Aerosol Products
  • D3065 - 01(2013) Test Methods for Flammability of Aerosol Products
  • D3069 - 94(2013) Test Method for Delivery Rate of Aerosol Products
  • D3070 - 18 Practice for Rapid Pressure Determination of Pressurized Products
  • D3076 - 18 Practice for Effective Crimping on Outside Crimped Valves of Aerosol Containers
  • D3078 - 02(2013) Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission
  • D3082 - 15 Test Method for Boron in Water
  • D3084 - 20 Practice for Alpha-Particle Spectrometry of Water
  • D3087 - 17 Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal
  • D3089 - 97(2017) Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
  • D3090 - 72(2016) Practice for Storage Testing of Aerosol Products
  • D3091 - 72(2016) Practice for Safe Filling of Low-Pressure Pressurized Products
  • D3094 - 18 Practice for Seepage Rate of Aerosol Products
  • D3103 - 20 Test Method for Thermal Insulation Performance of Distribution Packages
  • D3104 - 14a(2018) Test Method for Softening Point of Pitches (Mettler Softening Point Method)
  • D3105 - 17 Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials
  • D3106 - 07(2018) Test Method for Permanent Deformation of Elastomeric Yarns
  • D3107 - 07(2019) Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns
  • D3108/D3108M - 13(2020) Test Method for Coefficient of Friction, Yarn to Solid Material
  • D3111 - 19 Practice for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test
  • D3120 - 08(2019) Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
  • D3121 - 17 Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball
  • D3122 - 15 Specification for Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings
  • D3123 - 09(2017) Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds
  • D3124 - 98(2019) Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
  • D3125 - 06(2012) Test Method for Monomethyl Ether of Hydroquinone in Colorless Monomeric Acrylate Esters and Acrylic Acid
  • D3128 - 07(2013) Specification for 2-Methoxyethanol
  • D3130 - 11(2019) Specification for n-Propyl Acetate (96 % Grade)
  • D3131 - 07(2013) Specification for Isopropyl Acetate (99 % Grade)
  • D3134 - 15(2019) Practice for Establishing Color and Gloss Tolerances
  • D3135 - 12 Specification for Performance of Bonded, Fused, and Laminated Apparel Fabrics
  • D3136 - 14e1 Terminology Relating to Care Labeling for Apparel, Textile, Home Furnishing, and Leather Products
  • D3137 - 81(2018) Test Method for Rubber Property—Hydrolytic Stability
  • D3138 - 04(2016) Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components
  • D3139 - 19 Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals
  • D3141/D3141M - 15 Specification for Asphalt for Undersealing Portland-Cement Concrete Pavements
  • D3142/D3142M - 17 Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method
  • D3143/D3143M - 19 Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus
  • D3144 - 00(2013)e1 Specification for Crosslinked Poly(Vinylidene Fluoride) Heat-Shrinkable Tubing for Electrical Insulation
  • D3145 - 20 Test Method for Thermal Endurance of Electrical Insulating Varnishes by Helical Coil Method
  • D3147 - 06(2013) Test Method for Testing Stop-Leak Additives for Engine Coolants
  • D3150 - 18 Specification for Crosslinked and Noncrosslinked Poly(Vinyl Chloride) Heat-Shrinkable Tubing for Electrical Insulation
  • D3153 - 17 Test Method for Recoatability of Water-Emulsion Floor Polishes
  • D3154 - 14 Test Method for Average Velocity in a Duct (Pitot Tube Method)
  • D3156 - 96(2016) Practice for Rubber—Chromatographic Analysis of Antidegradants (Antioxidants, Antiozonants and Stabilizers)
  • D3157 - 05(2020) Test Method for Rubber from Natural Sources—Color
  • D3159 - 20 Specification for Modified ETFE Fluoropolymer Molding and Extrusion Materials
  • D3160 - 20a Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (α–Methylstyrene)
  • D3161/D3161M - 20 Test Method for Wind Resistance of Steep Slope Roofing Products (Fan-Induced Method)
  • D3162 - 12(2020) Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
  • D3163 - 01(2014) Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
  • D3164 - 03(2017) Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
  • D3165 - 07(2014) Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies
  • D3166 - 99(2020) Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)
  • D3167 - 10(2017) Test Method for Floating Roller Peel Resistance of Adhesives
  • D3168 - 85(2016) Practice for Qualitative Identification of Polymers in Emulsion Paints
  • D3170/D3170M - 14 Test Method for Chipping Resistance of Coatings
  • D3171 - 15 Test Methods for Constituent Content of Composite Materials
  • D3172 - 13 Practice for Proximate Analysis of Coal and Coke
  • D3173/D3173M - 17a Test Method for Moisture in the Analysis Sample of Coal and Coke
  • D3174 - 12(2018)e1 Test Method for Ash in the Analysis Sample of Coal and Coke from Coal
  • D3175 - 20 Test Method for Volatile Matter in the Analysis Sample of Coal and Coke
  • D3176 - 15 Practice for Ultimate Analysis of Coal and Coke
  • D3180 - 15 Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases
  • D3181 - 15(2019) Guide for Conducting Wear Tests on Textiles
  • D3182 - 16 Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
  • D3183 - 10(2019) Practice for Rubber—Preparation of Pieces for Test Purposes from Products
  • D3184 - 11(2018) Practice for Rubber—Evaluation of NR (Natural Rubber)
  • D3185 - 06(2016) Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Including Mixtures With Oil
  • D3186 - 07(2016) Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Mixed With Carbon Black or Carbon Black and Oil
  • D3187 - 06(2016) Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Rubber)
  • D3188 - 06(2017) Test Methods for Rubber—Evaluation of IIR (Isobutene-Isoprene Rubber)
  • D3189 - 06(2016) Test Methods for Rubber—Evaluation of Solution BR (Polybutadiene Rubber)
  • D3190 - 06(2016) Test Method for Rubber—Evaluation of Chloroprene Rubber (CR)
  • D3191 - 10(2020) Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)—Recipe and Evaluation Procedures
  • D3192 - 09(2019) Test Methods for Carbon Black Evaluation in NR (Natural Rubber)
  • D3193 - 19 Specification for Ethylbenzene
  • D3194 - 17 Test Method for Rubber From Natural Sources—Plasticity Retention Index (PRI)
  • D3195/D3195M - 10(2015) Practice for Rotameter Calibration
  • D3200 - 74(2017) Specification and Test Method for Establishing Recommended Design Stresses for Round Timber Construction Poles
  • D3201/D3201M - 20 Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Based Products
  • D3203/D3203M - 17 Test Method for Percent Air Voids in Compacted Asphalt Mixtures
  • D3206 - 17 Test Method for Soil Resistance of Floor Polishes
  • D3207 - 17 Test Method for Detergent Resistance of Floor Polish Films
  • D3209 - 93(2015) Test Method for Freeze/Thaw Resistance of Polymer Floor Polishes
  • D3210 - 95(2016) Test Method for Comparing Colors of Films from Water-Emulsion Floor Polishes
  • D3212 - 20 Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
  • D3213 - 19 Practices for Handling, Storing, and Preparing Soft Intact Marine Soil
  • D3217/D3217M - 20 Test Methods for Breaking Tenacity of Manufactured Textile Fibers in Loop or Knot Configurations
  • D3218 - 07(2018) Specification for Polyolefin Monofilaments
  • D3222 - 20 Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials
  • D3223 - 17 Test Method for Total Mercury in Water
  • D3227 - 16 Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)
  • D3228 - 20 Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method
  • D3230 - 19 Test Method for Salts in Crude Oil (Electrometric Method)
  • D3231 - 18 Test Method for Phosphorus in Gasoline
  • D3233 - 19 Test Methods for Measurement of Extreme Pressure Properties of Fluid Lubricants (Falex Pin and Vee Block Methods)
  • D3235 - 16e1 Test Method for Solvent Extractables in Petroleum Waxes
  • D3236 - 15 Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials
  • D3237 - 17 Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
  • D3238 - 17a Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method
  • D3239 - 91(2016) Test Method for Aromatic Types Analysis of Gas-Oil Aromatic Fractions by High Ionizing Voltage Mass Spectrometry
  • D3240 - 15 Test Method for Undissolved Water In Aviation Turbine Fuels
  • D3241 - 20c Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
  • D3242 - 11(2017) Test Method for Acidity in Aviation Turbine Fuel
  • D3244 - 20 Practice for Utilization of Test Data to Determine Conformance with Specifications
  • D3246 - 15 Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry
  • D3249 - 95(2019) Practice for General Ambient Air Analyzer Procedures
  • D3251 - 19 Test Method for Thermal Endurance Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire
  • D3256 - 86(2020) Test Methods for Chemical Analysis of Phthalocyanine Blue and Green Pigments
  • D3257 - 06(2012) Test Methods for Aromatics in Mineral Spirits by Gas Chromatography
  • D3258 - 04(2019) Test Method for Porosity of White or Near White Paint Films by Staining
  • D3260 - 01(2017) Test Method for Acid and Mortar Resistance of Factory-Applied Clear Coatings on Extruded Aluminum Products
  • D3261 - 16 Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
  • D3262 - 20 Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
  • D3265 - 19b Test Method for Carbon Black—Tint Strength
  • D3266 - 91(2018) Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method)
  • D3267 - 12 Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method)
  • D3268 - 91(2018) Test Method for Separation and Collection of Particulate and Gaseous Fluorides in the Atmosphere (Sodium Bicarbonate-Coated Glass Tube and Particulate Filter Method)
  • D3270 - 13 Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method)
  • D3273 - 16 Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
  • D3274 - 09(2017) Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation
  • D3275 - 18 Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials
  • D3276 - 15e1 Guide for Painting Inspectors (Metal Substrates)
  • D3278 - 20 Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus
  • D3279 - 19 Test Method for n-Heptane Insolubles
  • D3280 - 85(2020) Test Methods for Analysis of White Zinc Pigments
  • D3282 - 15 Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes
  • D3283 - 98(2020) Specification for Air as an Electrical Insulating Material
  • D3284 - 05(2019) Practice for Combustible Gases in the Gas Space of Electrical Apparatus Using Portable Meters
  • D3288/D3288M - 20 Test Methods for Magnet-Wire Enamels
  • D3289 - 17 Test Method for Density of Semi-Solid and Solid Asphalt Materials (Nickel Crucible Method)
  • D3291 - 11(2016)e1 Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression
  • D3294 - 15 Specification for Polytetrafluoroethylene (PTFE) Resin Molded Sheet and Molded Basic Shapes
  • D3295 - 20 Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing
  • D3296 - 14a(2019) Specification for FEP-Fluorocarbon Tube
  • D3299 - 18 Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
  • D3300 - 20 Test Method for Dielectric Breakdown Voltage of Insulating Liquids Under Impulse Conditions
  • D3302/D3302M - 19 Test Method for Total Moisture in Coal
  • D3306 - 20 Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service
  • D3307 - 16 Specification for Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials
  • D3308 - 12(2017) Specification for PTFE Resin Skived Tape
  • D3310 - 00(2014) Test Method for Determining Corrosivity of Adhesive Materials
  • D3311 - 17 Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
  • D3312 - 18 Test Method for Percent Reactive Monomer in Solventless Varnishes
  • D3314 - 02(2017) Test Method for Rubber—Chemical Analysis for Polystyrene Blocks In SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices
  • D3316 - 06(2016) Test Method for Stability of Perchloroethylene with Copper
  • D3319 - 11(2017) Practice for the Accelerated Polishing of Aggregates Using the British Wheel
  • D3320/D3320M - 18 Specification for Emulsified Coal-Tar Pitch (Mineral Colloid Type)
  • D3321 - 19 Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants
  • D3322 - 82(2017) Practice for Testing Primers and Primer Surfacers Over Preformed Metal
  • D3325 - 90(2020) Practice for Preservation of Waterborne Oil Samples
  • D3326 - 07(2017) Practice for Preparation of Samples for Identification of Waterborne Oils
  • D3328 - 06(2020) Test Methods for Comparison of Waterborne Petroleum Oils by Gas Chromatography
  • D3329 - 03(2017) Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography
  • D3330/D3330M - 04(2018) Test Method for Peel Adhesion of Pressure-Sensitive Tape
  • D3332 - 99(2016) Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines
  • D3333 - 07(2018) Practice for Sampling Manufactured Staple Fibers, Sliver, or Tow for Testing
  • D3335 - 85a(2020) Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
  • D3336 - 20b Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures
  • D3338/D3338M - 20a Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
  • D3339 - 12(2017) Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration
  • D3341 - 16 Test Method for Lead in Gasoline—Iodine Monochloride Method
  • D3342 - 90(2017) Test Method for Dispersion Stability of New (Unused) Rolling Oil Dispersions in Water
  • D3343 - 16 Test Method for Estimation of Hydrogen Content of Aviation Fuels
  • D3344 - 90(2015) Test Method for Total  Wax  Content  of  Corrugated  Paperboard
  • D3345 - 17 Test Method for Laboratory Evaluation of Solid Wood for Resistance to Termites
  • D3346 - 17 Test Methods for Rubber Property—Processability of Emulsion SBR (Styrene-Butadiene Rubber) With the Mooney Viscometer (Delta Mooney)
  • D3348 - 12(2017) Test Method for Rapid Field Test for Trace Lead in Unleaded Gasoline (Colorimetric Method)
  • D3349 - 17 Test Method for Absorption Coefficient of Ethylene Polymer Material Pigmented with Carbon Black
  • D3350 - 14 Specification for Polyethylene Plastics Pipe and Fittings Materials
  • D3352 - 15 Test Method for Strontium Ion in Brackish Water, Seawater, and Brines
  • D3353 - 18 Test Methods for Fibrous-Insulated Magnet Wire
  • D3354 - 15 Test Method for Blocking Load of Plastic Film by the Parallel Plate Method
  • D3359 - 17 Test Methods for Rating Adhesion by Tape Test
  • D3361/D3361M - 13(2018) Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
  • D3363 - 20 Test Method for Film Hardness by Pencil Test
  • D3364 - 99(2019) Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications
  • D3366 - 18 Test Method for Color of Maleic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale)
  • D3367 - 13 Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force
  • D3368 - 17 Specification for FEP Sheet and Film
  • D3370 - 18 Practices for Sampling Water from Flowing Process Streams
  • D3372 - 17 Test Method for Molybdenum in Water
  • D3373 - 17 Test Method for Vanadium in Water
  • D3374/D3374M - 14 Specification for Vinyl-Coated Glass Yarns
  • D3375 - 18 Test Method for Column Capacity of Particulate Mixed Bed IonExchange Materials
  • D3376 - 18 Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation
  • D3377 - 04(2018) Test Method for Weight Loss of Solventless Varnishes
  • D3380 - 14 Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Polymer-Based Microwave Circuit Substrates
  • D3381/D3381M - 18 Specification for Viscosity-Graded Asphalt Binder for Use in Pavement Construction
  • D3382 - 13 Test Methods for Measurement of Energy and Integrated Charge Transfer Due to Partial Discharges (Corona) Using Bridge Techniques
  • D3385 - 18 Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer
  • D3389 - 16 Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)
  • D3393 - 91(2014) Specification for Coated Fabrics—Waterproofness
  • D3394 - 16 Test Methods for Sampling and Testing Electrical Insulating Board
  • D3401 - 97(2017) Test Methods for Water in Halogenated Organic Solvents and Their Admixtures
  • D3402/D3402M - 16 Test Method for Tumbler Test for Coke
  • D3403 - 07(2016) Test Methods for Rubber—Evaluation of IR (Isoprene Rubber))
  • D3404 - 15 Guide for Measuring Matric Potential in Vadose Zone Using Tensiometers
  • D3409/D3409M - 93(2016)e1 Test Method for Adhesion of Asphalt-Roof Cement to Damp, Wet, or Underwater Surfaces
  • D3410/D3410M - 16 Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
  • D3412/D3412M - 13(2020) Test Method for Coefficient of Friction, Yarn to Yarn
  • D3415 - 98(2017) Practice for Identification of Waterborne Oils
  • D3418 - 15 Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
  • D3419 - 12(2019) Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds
  • D3420 - 14 Test Method for Pendulum Impact Resistance of Plastic Film
  • D3423/D3423M - 15 Practice for Application of Emulsified Coal-Tar Pitch (Mineral Colloid Type)
  • D3426 - 19 Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves
  • D3427 - 19 Test Method for Air Release Properties of Hydrocarbon Based Oils
  • D3430 - 95(2016) Test Method for Clarity and Yellowness of Liquid Water-Based Clear Floor Polishes
  • D3433 - 99(2020) Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
  • D3434 - 00(2018) Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives
  • D3437 - 15 Practice for Sampling and Handling Liquid Cyclic Products
  • D3438 - 19 Practice for Sampling and Handling Naphthalene, Maleic Anhydride, and Phthalic Anhydride
  • D3440 - 13(2019) Guide for Preparing Specifications for Water-Emulsion Floor Polishes
  • D3441 - 16 Test Method for Mechanical Cone Penetration Testing of Soils
  • D3443 - 00(2020) Test Method for Chloride in Trichlorotrifluoroethane
  • D3444 - 00(2020) Test Method for Total Acid Number of Trichlorotrifluoroethane
  • D3448 - 10(2020) Test Method for Specific Aqueous Conductance of Trichlorotrifluoroethane
  • D3450 - 15(2020) Test Method for Washability Properties of Interior Architectural Coatings
  • D3451 - 06(2017) Guide for Testing Coating Powders and Powder Coatings
  • D3452 - 06(2017) Practice for Rubber—Identification by Pyrolysis-Gas Chromatography
  • D3453 - 20 Specification for Flexible Cellular Materials—Urethane for Furniture and Automotive Cushioning, Bedding, and Similar Applications
  • D3454 - 18 Test Method for Radium-226 in Water 
  • D3455 - 11(2019) Test Methods for Compatibility of Construction Material with Electrical Insulating Oil of Petroleum Origin
  • D3456 - 18 Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack
  • D3461 - 18 Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method)
  • D3462/D3462M - 19 Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules
  • D3464 - 96(2014) Test Method for Average Velocity in a Duct Using a Thermal Anemometer
  • D3465 - 14 Test Method for Purity of Monomeric Plasticizers by Gas Chromatography
  • D3466 - 06(2018) Test Method for Ignition Temperature of Granular Activated Carbon
  • D3467 - 04(2020) Test Method for Carbon Tetrachloride Activity of Activated Carbon
  • D3468/D3468M - 99(2020) Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing
  • D3474 - 90(2018) Practice for Calibration and Use of Torque Meters Used in Packaging Applications
  • D3475 - 20 Classification of Child-Resistant Packages
  • D3479/D3479M - 19 Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials
  • D3482 - 07a(2014) Practice for Determining Electrolytic Corrosion of Copper by Adhesives
  • D3483 - 14 Test Methods for Accumulated Deposition in a Steam Generator Tube
  • D3484 - 06(2016) Test Methods for Rubber—Evaluation of Oil-Extended Solution BR (Polybutadiene Rubber)
  • D3485 - 15 Specification for Coilable High Density Polyethylene (HDPE) Cable in Conduit (CIC)
  • D3487 - 16e1 Specification for Mineral Insulating Oil Used in Electrical Apparatus
  • D3489 - 17 Test Methods for Microcellular Urethane Materials
  • D3492 - 16 Specification for Rubber Contraceptives (Male Condoms)
  • D3493 - 20 Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN)
  • D3495 - 10(2015) Test Method for Hexane Extraction of Leather
  • D3498 - 19a Specification for Adhesives for Field-Gluing Wood Structural Panels (Plywood or Oriented Strand Board) to Wood Based Floor System Framing
  • D3499 - 19 Test Method for Toughness of Wood Structural Panels
  • D3500 - 20 Test Methods for Wood Structural Panels in Tension
  • D3501 - 05a(2018) Test Methods for Wood-Based Structural Panels in Compression
  • D3505 - 18 Test Method for Density or Relative Density of Pure Liquid Chemicals
  • D3511/D3511M - 16 Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester
  • D3512/D3512M - 16 Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester
  • D3513 - 02(2018) Test Method for Overlength Fiber Content of Manufactured Staple Fiber
  • D3514/D3514M - 16(2020) Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Elastomeric Pad
  • D3516 - 89(2019)e1 Test Methods for Ashing Cellulose
  • D3517 - 19 Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
  • D3518/D3518M - 18 Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate
  • D3521 - 86(2017) Test Method for Surface Wax Coating On Corrugated Board
  • D3524 - 14(2020) Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography
  • D3525 - 20 Test Method for Gasoline Fuel Dilution in Used Gasoline Engine Oils by Wide-Bore Capillary Gas Chromatography
  • D3527 - 18 Test Method for Life Performance of Automotive Wheel Bearing Grease
  • D3528 - 96(2016) Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
  • D3529 - 16 Test Methods for Constituent Content of Composite Prepreg
  • D3530 - 20 Test Method for Volatiles Content of Composite Material Prepreg
  • D3531/D3531M - 16 Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg
  • D3532/D3532M - 19 Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg
  • D3535 - 07a(2013) Test Method for Resistance to Creep Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior Exposure Conditions
  • D3540 - 12 Specification for Primary Amyl Acetate, Synthetic (98 % Grade)
  • D3542 - 08(2019) Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges
  • D3543 - 17 Test Method for Metal Glide Adhesion
  • D3545 - 06(2012) Test Method for Alcohol Content and Purity of Acetate Esters by Gas Chromatography
  • D3546 - 05(2019) Test Method for Formic Acid in Glacial Acetic Acid
  • D3548 - 09(2017) Specification for Ethyl Acrylate
  • D3549/D3549M - 18 Test Method for Thickness or Height of Compacted Asphalt Mixture Specimens
  • D3550/D3550M - 17 Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils
  • D3551 - 17 Practice for Laboratory Preparation of Soil-Lime Mixtures Using Mechanical Mixer
  • D3552 - 17 Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites
  • D3554 - 20e1 Specification for Track-Resistant Thermoplastic High-Density Polyethylene Insulation for Wire and Cable, 75 °C Operation
  • D3555 - 20e1 Specification for Track-Resistant Crosslinked Polyethylene Insulation for Wire and Cable, 90 °C Operation
  • D3556 - 14 Guide for Deposition on Glassware During Mechanical Dishwashing
  • D3557 - 17 Test Methods for Cadmium in Water
  • D3558 - 15 Test Methods for Cobalt in Water
  • D3559 - 15 Test Methods for Lead in Water
  • D3561 - 16 Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry
  • D3562 - 14 Performance Specification for Woven Drycleanable Coat Fabrics
  • D3564 - 95(2015) Practice for Application of Floor Polishes to Maintain Vinyl Composition Tile or Flooring
  • D3566 - 03(2018) Practice for Rubber—Determination of Bromine in the Presence of Chlorine by Oxygen Combustion
  • D3567 - 17 Practice for Determining Dimensions of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
  • D3568 - 03(2018) Test Methods for Rubber—Evaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including Mixtures With Oil
  • D3574 - 17 Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams
  • D3575 - 20 Test Methods for Flexible Cellular Materials Made from Olefin Polymers
  • D3576 - 20 Test Method for Cell Size of Rigid Cellular Plastics
  • D3577 - 19 Specification for Rubber Surgical Gloves
  • D3578 - 19 Specification for Rubber Examination Gloves
  • D3579 - 77(2016) Specification for Rubber Surgical Drainage Tubes, Penrose-Type
  • D3580 - 95(2015) Test Methods for Vibration (Vertical Linear Motion) Test of Products
  • D3585 - 08(2020) Specification for ASTM Reference Fluid for Coolant Tests
  • D3588 - 98(2017)e1 Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels
  • D3590 - 17 Test Methods for Total Kjeldahl Nitrogen in Water
  • D3591 - 17 Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in Formulated Compounds
  • D3595 - 14(2019)e1 Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film
  • D3596 - 19 Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins
  • D3597 - 02(2018)e1 Performance Specification for Woven Upholstery Fabrics—Plain, Tufted, or Flocked
  • D3598 - 89(2016) Test Method for Citrate in Synthetic Detergents
  • D3603 - 20 Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method)
  • D3605 - 17 Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy
  • D3606 - 20e1 Test Method for Determination of Benzene and Toluene in Spark Ignition Fuels by Gas Chromatography
  • D3607 - 08(2016) Test Method for Removing Volatile Contaminants from Used Engine Oils by Stripping
  • D3608 - 19 Test Method for Nitrogen Oxides (Combined) Content in the Atmosphere by the Griess-Saltzman Reaction
  • D3609 - 00(2014) Practice for Calibration Techniques Using Permeation Tubes
  • D3610 - 00(2015) Test Method for Total Cobalt in Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration Method
  • D3611 - 06(2019) Practice for Accelerated Aging of Pressure-Sensitive Tapes
  • D3612 - 02(2017) Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography
  • D3614 - 07(2013) Guide for Laboratories Engaged in Sampling and Analysis of Atmospheres and Emissions
  • D3616 - 95(2019) Test Method for Rubber—Determination of Gel, Swelling Index, and Dilute Solution Viscosity
  • D3617/D3617M - 17 Practice for Sampling and Analysis of Built-Up Roof Systems During Application
  • D3618 - 05(2015) Test Method for Detection of Lead in Paint and Dried Paint Films
  • D3620 - 04(2017) Specification for Glacial Acetic Acid
  • D3622 - 11(2019) Specification for 1-Propanol (n-Propyl Alcohol)
  • D3623 - 78a(2020) Test Method for Testing Antifouling Panels in Shallow Submergence
  • D3624 - 85a(2015) Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
  • D3625/D3625M - 20 Practice for Effect of Water on Asphalt-Coated Aggregate Using Boiling Water
  • D3628 - 15(2021) Practice for Selection and Use of Emulsified Asphalts
  • D3631 - 99(2017) Test Methods for Measuring Surface Atmospheric Pressure
  • D3632 - 98(2019) Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method
  • D3633/D3633M - 12(2019) Test Method for Electrical Resistivity of Membrane-Pavement Systems
  • D3634 - 99(2015) Test Method for Trace Chloride Ion in Engine Coolants
  • D3635 - 13 Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry
  • D3636 - 19 Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
  • D3638 - 12 Test Method for Comparative Tracking Index of Electrical Insulating Materials
  • D3639/D3639M - 92(2019) Test Method for Classification of Asbestos by Quebec Standard Test
  • D3641 - 15 Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials
  • D3642 - 13 Test Method for Softening Point of Certain Alkali-Soluble Resins
  • D3643 - 15 Test Method for Acid Number of Certain Alkali-Soluble Resins
  • D3644 - 15 Test Method for Acid Number of Styrene-Maleic Anhydride Resins
  • D3645 - 15 Test Methods for Beryllium in Water
  • D3647 - 16 Practice for Classifying Reinforced Plastic Pultruded Shapes According to Composition
  • D3648 - 14 Practices for the Measurement of Radioactivity
  • D3649 - 06(2014) Practice for High-Resolution Gamma-Ray Spectrometry of Water
  • D3651 - 16 Test Method for Barium in Brackish Water, Seawater, and Brines
  • D3652/D3652M - 01(2020) Test Method for Thickness of Pressure-Sensitive Tapes
  • D3654/D3654M - 06(2019) Test Methods for Shear Adhesion of Pressure-Sensitive Tapes
  • D3655 - 14 Performance Specification for Men’s and Women’s Sliver Knitted Overcoat and Jacket Fabrics
  • D3656/D3656M - 13 Specification for Insect Screening and Louver Cloth Woven fromVinyl-Coated Glass Yarns
  • D3657 - 03(2014) Specification for Zipper Dimensions
  • D3658 - 01(2016) Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
  • D3663 - 20 Test Method for Surface Area of Catalysts and Catalyst Carriers
  • D3664 - 16 Specification for Biaxially Oriented Polymeric Resin Film for Capacitors in Electrical Equipment
  • D3665 - 12(2017) Practice for Random Sampling of Construction Materials
  • D3666 - 16 Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
  • D3667 - 16 Specification for Rubber Seals Used in Flat-Plate Solar Collectors
  • D3670 - 91(2014) Guide for Determination of Precision and Bias of Methods of Committee D22
  • D3673 - 89(2016) Test Methods for Chemical Analysis of Alpha Olefin Sulfonates
  • D3675 - 19 Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
  • D3676 - 18 Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay
  • D3677 - 10(2019) Test Methods for Rubber—Identification by Infrared Spectrophotometry
  • D3678 - 19 Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions
  • D3679 - 17 Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
  • D3681 - 18 Test Method for Chemical Resistance of “Fiberglass” (Glass–Fiber–Reinforced Thermosetting-Resin) Pipe in a Deflected Condition
  • D3682 - 13 Test Method for Major and Minor Elements in Combustion Residues from Coal Utilization Processes
  • D3685/D3685M - 13 Test Methods for Sampling and Determination of Particulate Matter in Stack Gases
  • D3686 - 20 Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method)
  • D3687 - 19 Test Method for Analysis of Organic Compound Vapors Collected by the Activated Charcoal Tube Adsorption Method
  • D3689/D3689M - 07(2013)e1 Test Methods for Deep Foundations Under Static Axial Tensile Load
  • D3690 - 19 Performance Specification for Vinyl-Coated and Urethane-Coated Upholstery Fabrics—Indoor
  • D3691/D3691M - 19 Performance Specification for Woven, Lace, and Knit Household Curtain and Drapery Fabrics
  • D3692 - 89(2016) Practice for Selection of Zippers for Care-Labeled Apparel and Household Furnishings
  • D3693 - 02(2016) Specification for Labeled Length per Holder of Sewing Thread
  • D3694 - 96(2017) Practices for Preparation of Sample Containers and for Preservation of Organic Constituents
  • D3695 - 95(2013) Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography
  • D3697 - 17 Test Method for Antimony in Water
  • D3698 - 04(2020) Practice for Solvent Vapor Degreasing Operations
  • D3699 - 19 Specification for Kerosine
  • D3700 - 16 Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
  • D3701 - 17 Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry
  • D3702 - 94(2019) Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine
  • D3703 - 18 Test Method for Hydroperoxide Number of Aviation Turbine Fuels, Gasoline and Diesel Fuels
  • D3704 - 96(2017) Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion
  • D3705 - 14(2019) Test Method for Misting Properties of Lubricating Fluids
  • D3712 - 18 Test Method of Analysis of Oil-Soluble Sulfonates by Liquid Chromatography
  • D3715/D3715M - 98(2019) Practice for Quality Assurance of Pressure-Sensitive Tapes
  • D3716 - 14(2020) Test Methods for Use of Emulsion Polymers in Floor Polishes
  • D3717 - 85a(2015) Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
  • D3718 - 85a(2015) Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
  • D3720 - 90(2019) Test Method for Ratio of Anatase to Rutile in Titanium Dioxide Pigments by X-Ray Diffraction
  • D3721 - 05(2019) Specification for Synthetic Red Iron Oxide Pigment
  • D3722 - 05(2019) Specification for Natural Red and Brown Iron Oxide Pigments
  • D3723 - 05(2017) Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing
  • D3724 - 01(2019) Specification for Synthetic Brown Iron Oxide Pigment
  • D3728 - 08(2012) Specification for 2-Ethoxyethyl Acetate (99 % Grade)
  • D3730 - 17 Guide for Testing High-Performance Interior Architectural Wall Coatings
  • D3731 - 20 Practices for Measurement of Chlorophyll Content of Algae in Surface Waters
  • D3732 - 82(2017) Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
  • D3734 - 05(2018) Specification for High-Flash Aromatic Naphthas
  • D3735 - 07(2012) Specification for VM&P Naphthas
  • D3737 - 18e1 Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam)
  • D3738 - 16 Specification for Rubber-Coated Cloth Hospital Sheeting
  • D3739 - 19 Practice for Calculation and Adjustment of the Langelier Saturation Index for Reverse Osmosis
  • D3740 - 19 Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
  • D3741 - 00(2020) Test Methods for Appearance of Admixtures Containing Halogenated Organic Solvents
  • D3744/D3744M - 18 Test Method for Aggregate Durability Index
  • D3746/D3746M - 85(2015)e1 Test Method for Impact Resistance of Bituminous Roofing Systems
  • D3748 - 14(2019) Practice for Evaluating High-Density Rigid Cellular Plastics
  • D3749 - 19 Test Method for Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins by Gas Chromatographic Headspace Technique
  • D3751/D3751M - 10(2017) Practice for Evaluation of Furniture Polish
  • D3752 - 98(2019) Test Method for Strength Imparted by Asbestos to a Cementitious Matrix
  • D3753 - 20 Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Manholes and Wetwells
  • D3754 - 19 Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
  • D3755 - 20 Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Under Direct-Voltage Stress
  • D3756 - 18 Test Method for Evaluation of Resistance to Electrical Breakdown by Treeing in Solid Dielectric Materials Using Diverging Fields
  • D3757 - 16 Guide for Preparing Specifications for Solvent-based Floor Polishes
  • D3758 - 95(2017) Practice for Evaluation of Spray-Buff Products on Test Floors
  • D3759/D3759M - 05(2019) Test Method for Breaking Strength and Elongation of Pressure-Sensitive Tape
  • D3760 - 18 Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography
  • D3763 - 18 Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors
  • D3764 - 19 Practice for Validation of the Performance of Process Stream Analyzer Systems
  • D3766 - 08(2018) Terminology Relating to Catalysts and Catalysis
  • D3767 - 03(2020) Practice for Rubber—Measurement of Dimensions
  • D3768 - 16 Test Method for Microcellular Urethanes—Flexural Recovery
  • D3769 - 20 Test Method for Microcellular Urethanes—High-Temperature Sag
  • D3771 - 15 Specification for Rubber Seals Used in Concentrating Solar Collectors
  • D3772 - 15 Specification for Industrial Rubber Finger Cots
  • D3773/D3773M - 10(2019) Test Methods for Length of Woven Fabric
  • D3774 - 18 Test Method for Width of Textile Fabric
  • D3775 - 17e1 Test Method for End (Warp) and Pick (Filling) Count of Woven Fabrics
  • D3776/D3776M - 20 Test Methods for Mass Per Unit Area (Weight) of Fabric
  • D3780 - 14 Performance Specification for Men’s and Boys’ Woven Dress Suit Fabrics and Woven Sportswear Jacket, Slack, and Trouser Fabrics
  • D3782 - 14 Performance Specification for Men’s and Boys’ Knitted Dress Suit Fabrics and Knitted Sportswear Jacket, Slack, and Trouser Fabrics
  • D3785 - 20 Performance Specification for Woven Necktie and Scarf Fabrics
  • D3786/D3786M - 18 Test Method for Bursting Strength of Textile Fabrics—Diaphragm Bursting Strength Tester Method
  • D3787 - 16(2020) Test Method for Bursting Strength of Textiles—Constant-Rate-of-Traverse (CRT) Ball Burst Test
  • D3790 - 17 Test Method for Volatile Matter (Moisture) of Leather by Oven Drying
  • D3791/D3791M - 11(2018) Practice for Evaluating the Effects of Heat on Asphalts
  • D3792 - 16 Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph
  • D3794 - 18 Guide for Testing Coil Coatings
  • D3795 - 20 Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
  • D3796 - 09(2016) Practice for Calibration of Type S Pitot Tubes
  • D3800 - 16 Test Method for Density of High-Modulus Fibers
  • D3801 - 20a Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
  • D3802 - 16 Test Method for Ball-Pan Hardness of Activated Carbon
  • D3803 - 91(2014) Test Method for Nuclear-Grade Activated Carbon
  • D3804 - 02(2014) Test Method for Iron in Paint Driers by EDTA Method
  • D3805/D3805M - 16 Guide for Application of Aluminum-Pigmented Asphalt Roof Coatings
  • D3806 - 19a Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method)
  • D3807 - 98(2019) Test Method for Strength Properties of Adhesives in Cleavage Peel by Tension Loading (Engineering Plastics-to-Engineering Plastics)
  • D3808 - 01(2013) Test Method for Qualitative Determination of Adhesion of Adhesives to Substrates by Spot Adhesion
  • D3811/D3811M - 96(2018) Test Method for Unwind Force of Pressure-Sensitive Tapes
  • D3813/D3813M - 98(2020) Test Method for Curling, Twisting, and Tubing on Unwind of Pressure-Sensitive Tapes
  • D3815/D3815M - 05(2019) Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Open-Flame Carbon-Arc Exposure Apparatus
  • D3816/D3816M - 96(2020) Test Method for Water Penetration Rate of Pressure-Sensitive Tapes
  • D3822/D3822M - 14(2020) Test Method for Tensile Properties of Single Textile Fibers
  • D3823 - 07(2018) Practice for Determining Ticket Numbers for Sewing Threads
  • D3824 - 20 Test Methods for Continuous Measurement of Oxides of Nitrogen in the Ambient or Workplace Atmosphere by Chemiluminescence
  • D3826 - 18 Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test
  • D3827 - 92(2020) Test Method for Estimation of Solubility of Gases in Petroleum and Other Organic Liquids
  • D3828 - 16a Test Methods for Flash Point by Small Scale Closed Cup Tester
  • D3829 - 20a Test Method for Predicting the Borderline Pumping Temperature of Engine Oil
  • D3831 - 12(2017) Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy
  • D3832 - 79(2017) Specification for Rubber Seals Contacting Liquids in Solar Energy Systems
  • D3833/D3833M - 96(2019) Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes
  • D3835 - 16 Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
  • D3836 - 13 Practice for Evaluation of Automotive Polish
  • D3837 - 95(2019) Practice for Preparing a Solution of Alkali–Soluble Resins
  • D3838 - 05(2017) Test Method for pH of Activated Carbon
  • D3839 - 14(2019) Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting-Resin) Pipe
  • D3840 - 19 Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications
  • D3841 - 16 Specification for Glass-Fiber-Reinforced Polyester Plastic Panels
  • D3843 - 16 Practice for Quality Assurance for Protective Coatings Applied to Nuclear Facilities
  • D3846 - 08(2015) Test Method for In-Plane Shear Strength of Reinforced Plastics
  • D3847 - 01(2018) Practice for Rubber—Directions for Achieving Subnormal Test Temperatures
  • D3848 - 03(2018) Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Copolymers) Mixed With Carbon Black
  • D3849 - 14a Test Method for Carbon Black—Morphological Characterization of Carbon Black Using Electron Microscopy
  • D3850 - 19 Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
  • D3851 - 17 Specification for Microcellular Polyurethane Shoe Soling Materials
  • D3852 - 20 Practice for Sampling and Handling Phenol, Cresols, and Cresylic Acid
  • D3853 - 12(2017) Terminology Relating to Rubber and Rubber Latices—Abbreviations for Chemicals Used in Compounding
  • D3856 - 11(2015) Guide for Management Systems in Laboratories Engaged in Analysis of Water
  • D3858 - 95(2014) Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
  • D3859 - 15 Test Methods for Selenium in Water
  • D3860 - 98(2020) Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique
  • D3862 - 13(2019) Test Method for Retention Characteristics of 0.2-µm Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality
  • D3864 - 12(2021) Guide for On-Line Monitoring Systems for Water Analysis
  • D3865 - 09(2015) Test Method for Plutonium in Water
  • D3866 - 18 Test Methods for Silver in Water
  • D3867 - 16 Test Methods for Nitrite-Nitrate in Water
  • D3868 - 15 Test Method for Fluoride Ions in Brackish Water, Seawater, and Brines
  • D3869 - 15 Test Methods for Iodide and Bromide Ions in Brackish Water, Seawater, and Brines
  • D3871 - 84(2017) Test Method for Purgeable Organic Compounds in Water Using Headspace Sampling
  • D3872 - 05(2019) Test Method for Ferrous Iron in Iron Oxides
  • D3874 - 20 Test Method for Ignition of Materials by Hot Wire Sources
  • D3875 - 15 Test Method for Alkalinity in Brackish Water, Seawater, and Brines
  • D3876 - 96(2013) Test Method for Methoxyl and Hydroxypropyl Substitution in Cellulose Ether Products by Gas Chromatography
  • D3878 - 20b Terminology for Composite Materials
  • D3880/D3880M - 90(2017) Test Method for Asbestos Strength Units
  • D3882 - 08(2020) Test Method for Bow and Skew in Woven and Knitted Fabrics
  • D3883 - 04(2020) Test Method for Yarn Crimp and Yarn Take-up in Woven Fabrics
  • D3884 - 09(2017) Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method)
  • D3885 - 07a(2019) Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
  • D3886 - 99(2015) Test Method for Abrasion Resistance of Textile Fabrics (Inflated Diaphragm Apparatus)
  • D3888 - 15 Terminology for Yarn Spinning Systems
  • D3889/D3889M - 96(2020) Test Method for Adherence to Linerboard of Pressure-Sensitive Tape at Low Temperature
  • D3890 - 18 Practice for Number of Strokes to Prime a Mechanical Pump Dispenser
  • D3891 - 08(2019) Practice for Preparation of Glass Panels for Testing Paint, Varnish, Lacquer, and Related Products
  • D3892 - 15(2020) Practice for Packaging/Packing of Plastics
  • D3893 - 03(2017) Test Method for Purity of Methyl Amyl Ketone and Methyl Isoamyl Ketone by Gas Chromatography
  • D3895 - 19 Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
  • D3896 - 07(2016) Practice for Rubber From Synthetic Sources—Sampling
  • D3897 - 18 Test Method for Calculation of Basicity of Chrome Tanning Liquors
  • D3898 - 93(2015) Test Method for Chromic Oxide in Basic Chromium Tanning Liquors
  • D3900 - 17 Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
  • D3902 - 90(2020) Test Method for Rubber Hose for Gas Diffusion of Liquefied Petroleum Gas
  • D3903 - 15 Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems
  • D3906 - 19 Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials
  • D3907/D3907M - 19 Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
  • D3908 - 20 Test Method for Hydrogen Chemisorption on Supported Platinum Catalysts by Volumetric Vacuum Method
  • D3909/D3909M - 14 Specification for Asphalt Roll Roofing (Glass Felt) Surfaced With Mineral Granules
  • D3910 - 15 Practices for Design, Testing, and Construction of Slurry Seal
  • D3911 - 16 Test Method for Evaluating Coatings Used in Light-Water Nuclear Power Plants at Simulated Design Basis Accident (DBA) Conditions
  • D3912 - 10(2017) Test Method for Chemical Resistance of Coatings and Linings for Use in Nuclear Power Plants
  • D3913 - 03(2020)e1 Test Method for Acidity in Basic Chromium Tanning Liquors
  • D3914 - 02(2016) Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod
  • D3916 - 08(2016) Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod
  • D3917 - 15a Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes
  • D3919 - 15 Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry
  • D3920 - 18 Test Method for Strontium in Water
  • D3923 - 08(2014) Practices for Detecting Leaks in Reverse Osmosis and Nanofiltration Devices
  • D3924 - 16(2019) Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials
  • D3925 - 02(2015) Practice for Sampling Liquid Paints and Related Pigmented Coatings
  • D3926 - 05(2019) Test Methods for Percent Solids in Titanium Dioxide Slurries
  • D3928 - 00a(2018) Test Method for Evaluation of Gloss or Sheen Uniformity
  • D3929 - 03(2015) Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
  • D3930 - 08(2015) Specification for Adhesives for Wood-Based Materials for Construction of Manufactured Homes
  • D3931 - 08(2015) Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading
  • D3933 - 98(2017) Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing)
  • D3934 - 20 Test Method for Flash/No Flash Test—Equilibrium Method by a Closed-Cup Apparatus
  • D3935 - 15 Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material
  • D3936 - 17 Test Method for Resistance to Delamination of the Secondary Backing of Pile Yarn Floor Covering
  • D3937 - 12(2018) Test Method for Crimp Frequency of Manufactured Staple Fibers
  • D3938 - 18 Guide for Determining or Confirming Care Instructions for Apparel and Other Textile Products
  • D3939/D3939M - 13(2017) Test Method for Snagging Resistance of Fabrics (Mace)
  • D3941 - 20 Test Method for Flash Point by the Equilibrium Method With a Closed-Cup Apparatus
  • D3942 - 19 Test Method for Determination of the Unit Cell Dimension of a Faujasite-Type Zeolite
  • D3943 - 10(2015) Test Method for Total Molybdenum in Fresh Alumina-Base Catalysts
  • D3944 - 12(2017) Test Method for Solidification Point of Petroleum Wax
  • D3948 - 20 Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
  • D3950 - 17 Specification for Strapping, Nonmetallic (and Joining Methods)
  • D3951 - 18 Practice for Commercial Packaging
  • D3953 - 15 Specification for Strapping, Flat Steel and Seals
  • D3954 - 15 Test Method for Dropping Point of Waxes
  • D3955 - 20 Specification for Electrical Insulating Varnishes
  • D3956 - 12(2018) Specification for Methane Thermophysical Property Tables
  • D3957 - 09(2020) Practices for Establishing Stress Grades for Structural Members Used in Log Buildings
  • D3958 - 06(2016) Test Methods for Rubber—Evaluation of BIIR and CIIR (Halogenated Isobutene—Isoprene Rubber)
  • D3960 - 05(2018) Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
  • D3963/D3963M - 15 Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars
  • D3964 - 10(2020) Practice for Selection of Coating Specimens for Appearance Measurements
  • D3965 - 16 Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
  • D3966/D3966M - 07(2013)e1 Test Methods for Deep Foundations Under Lateral Load
  • D3967 - 16 Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
  • D3969 - 01(2019)e1 Test Method for Zirconium in Paint Driers by EDTA Method
  • D3970 - 05(2017) Test Method for Cerium in Paint Driers by Oxidimetric Determination
  • D3971 - 89(2019) Test Method for Dichloromethane-Soluble Matter in Cellulose
  • D3972 - 09(2015) Test Method for Isotopic Uranium in Water by Radiochemistry
  • D3973 - 85(2017) Test Method for Low-Molecular Weight Halogenated Hydrocarbons in Water
  • D3974 - 09(2015) Practices for Extraction of Trace Elements from Sediments
  • D3975 - 93(2019) Practice for Development and Use (Preparation) of Samples for Collaborative Testing of Methods for Analysis of Sediments
  • D3976 - 92(2015) Practice for Preparation of Sediment Samples for Chemical Analysis
  • D3977 - 97(2019) Test Methods for Determining Sediment Concentration in Water Samples
  • D3978 - 04(2012) Practice for Algal Growth Potential Testing with Pseudokirchneriella subcapitata
  • D3981 - 09a(2016) Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
  • D3982 - 08(2014) Specification for Contact Molded “Fiberglass” (Glass Fiber Reinforced Thermosetting Resin) Ducts
  • D3983 - 98(2019) Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
  • D3984 - 19 Specification for Ethane Thermophysical Property Tables
  • D3985 - 17 Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor
  • D3986 - 17 Test Method for Barium in Brines, Seawater, and Brackish Water by Direct-Current Argon Plasma Atomic Emission Spectroscopy
  • D3987 - 12(2020) Practice for Shake Extraction of Solid Waste with Water
  • D3988 - 05(2017) Test Method for Vanadium in Paint Driers by EDTA Method
  • D3989 - 01(2019)e1 Test Method for Total Rare Earth Metals in Paint Driers by EDTA Method
  • D3990 - 12(2020) Terminology Relating to Fabric Defects
  • D3991 - 94(2012)e1 Specifications for Fineness of Wool or Mohair and Assignment of Grade
  • D3992 - 94(2012)e1 Specifications for Fineness of Wool Top or Mohair Top and Assignment of Grade
  • D3994 - 14 Performance Specification for Woven Swimwear Fabrics
  • D3995 - 14 Performance Specification for Men’s and Women’s Knitted Career Apparel Fabrics: Dress and Vocational
  • D3996 - 14 Performance Specification for Knit Swimwear Fabrics
  • D3997/D3997M - 16 Practice for Preparing Coke Samples for Microscopical Analysis by Reflected Light
  • D4000 - 20 Classification System for Specifying Plastic Materials[2]

D4001-D5000[edit]

D5001-D6000[edit]

D6001-D7000[edit]

D7001-D8000[edit]

  • D7001 - 20 Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications
  • D7002 - 16 Practice for Electrical Leak Location on Exposed Geomembranes Using the Water Puddle Method
  • D7003/D7003M - 03(2013)e1 Test Method for Strip Tensile Properties of Reinforced Geomembranes
  • D7004/D7004M - 03(2013)e1 Test Method for Grab Tensile Properties of Reinforced Geomembranes
  • D7005/D7005M - 16 Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites
  • D7006 - 03(2013) Practice for Ultrasonic Testing of Geomembranes
  • D7007 - 16 Practices for Electrical Methods for Locating Leaks in Geomembranes Covered with Water or Earthen Materials
  • D7008 - 08(2018) Specification for Geosynthetic Alternate Daily Covers
  • D7011 - 15(2019) Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection
  • D7012 - 14e1 Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
  • D7013/D7013M - 15 Guide for Calibration Facility Setup for Nuclear Surface Gauges
  • D7014 - 18 Practice for Installation of Double-Twisted Wire Mesh Gabions and Revet Mattresses
  • D7015/D7015M - 18 Practices for Obtaining Intact Block (Cubical and Cylindrical) Samples of Soils
  • D7016/D7016M - 20 Test Method to Evaluate Edge Binding Components Used in Mattresses After Exposure to An Open Flame
  • D7017 - 20 Performance Specification for Water-Resistant Rainwear and All-Purpose, Water-Repellent Coat Fabrics
  • D7018/D7018M - 12 Terminology Relating to Glass Fiber and Its Products
  • D7019 - 20 Performance Specification for Brassiere, Slip, Lingerie and Underwear Fabrics
  • D7020 - 14 Performance Specification for Woven Blouse, Dress, Dress Shirt & Sport Shirt Fabrics
  • D7021 - 14 Performance Specification for Bathrobe, Dressing Gown, Negligee, Nightgown, and Pajama Fabrics
  • D7022 - 13e2 Terminology Relating to Apparel
  • D7023 - 06(2018) Terminology Relating to Home Furnishings
  • D7025 - 09(2015)e1 Test Method for Assessing Clean Flax Fiber Fineness
  • D7027 - 20 Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine
  • D7028 - 07(2015) Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)
  • D7029 - 17 Test Method for Determination of Reactivity of Unsaturated Polyesters and Vinyl Esters at 180.0°F (82.2°C)
  • D7030 - 04(2017) Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine
  • D7031 - 11(2019) Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products
  • D7032 - 17 Specification for Establishing Performance Ratings for Wood-Plastic Composite and Plastic Lumber Deck Boards, Stair Treads, Guards, and Handrails
  • D7033 - 14 Practice for Establishing Design Capacities for Oriented Strand Board (OSB) Wood-Based Structural-Use Panels
  • D7034 - 18 Guide for Deriving Acceptable Levels of Airborne Chemical Contaminants in Aircraft Cabins Based on Health and Comfort Considerations
  • D7035 - 16 Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
  • D7036 - 16 Practice for Competence of Air Emission Testing Bodies
  • D7038 - 20 Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants
  • D7039 - 15a(2020) Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
  • D7040 - 04(2020) Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
  • D7041 - 16 Test Method for Determination of Total Sulfur in Liquid Hydrocarbons and Hydrocarbon-Oxygenate Blends by Gas Chromatography with Flame Photometric Detection
  • D7042 - 21 Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
  • D7043 - 17 Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump
  • D7044 - 15 Specification for Biodegradable Fire Resistant Hydraulic Fluids
  • D7045 - 17 Guide for Optimization of Groundwater Monitoring Constituents for Detection Monitoring Programs for Waste Disposal Facilities
  • D7047 - 15e1 Test Method for Swell Volume of Plantago Insularis (Ovata, Psyllium)
  • D7048 - 16 Guide for Applying Statistical Methods for Assessment and Corrective Action Environmental Monitoring Programs
  • D7049 - 17 Test Method for Metalworking Fluid Aerosol in Workplace Atmospheres
  • D7050 - 04(2019) Practice for Rubber from Natural Sources—Sampling and Sorting Bales Based on Predicted Processing Properties
  • D7051 - 05(2020) Test Method for Cyclic Thermal Shock of SBS-Modified Bituminous Roofing Sheets with Factory-Applied Metal Surface
  • D7052/D7052M - 17 Test Method for Determining Impact Resistance of New Low Slope Roof Membranes Using Steel Balls (Z8295Z)
  • D7053/D7053M - 17 Guide for Determining and Evaluating Causes of Water Leakage of Low-Sloped Roofs
  • D7054 - 04(2019) Specification for Cautionary Labeling of Extension Poles For Use With Paint Applicators Distributed In North America
  • D7055 - 19 Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings
  • D7056 - 07(2018) Test Method for Determining the Tensile Shear Strength of Prefabricated Bituminous Geomembrane Seams
  • D7057 - 18 Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard)
  • D7058 - 19 Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer
  • D7059 - 09(2017) Test Method for Determination of Methanol in Crude Oils by Multidimensional Gas Chromatography
  • D7060 - 20 Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)
  • D7061 - 19e1 Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene-Containing Heavy Fuel Oils as Separability Number by an Optical Scanning Device
  • D7063/D7063M - 18 Test Method for Effective Porosity and Effective Air Voids of Compacted Asphalt Mixture Samples
  • D7064/D7064M - 08(2013) Practice for Open-Graded Friction Course (OGFC) Mix Design
  • D7065 - 17 Test Method for Determination of Nonylphenol, Bisphenol A, p-tert-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Gas Chromatography Mass Spectrometry
  • D7066 - 04(2017) Test Method for dimer/trimer of chlorotrifluoroethylene (S-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination
  • D7069 - 04(2015) Guide for Field Quality Assurance in a Groundwater Sampling Event
  • D7070 - 16 Test Methods for Creep of Rock Core Under Constant Stress and Temperature
  • D7072 - 04(2019) Practice for Evaluating Accelerated Efflorescence of Latex Coatings
  • D7073 - 20 Guide for Application and Evaluation of Brush and Roller Applied Paint Films
  • D7076 - 10(2015)e1 Test Method for Measurement of Shives in Retted Flax
  • D7078/D7078M - 20 Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
  • D7082 - 15 Specification for Polyethylene Stay In Place Form System for End Walls for Drainage Pipe
  • D7083 - 16 Practice for Determination of Monomeric Plasticizers in Poly (Vinyl Chloride) (PVC) by Gas Chromatography
  • D7084 - 18 Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
  • D7085 - 04(2018) Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF)
  • D7088 - 17 Practice for Resistance to Hydrostatic Pressure for Coatings Used in Below Grade Applications Applied to Masonry
  • D7089 - 06(2014) Practice for Determination of the Effectiveness of Anti-Graffiti Coating for Use on Concrete, Masonry and Natural Stone Surfaces by Pressure Washing
  • D7090 - 04(2018) Test Method for Purity of Isophorone by Capillary Gas Chromatography
  • D7091 - 20 Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
  • D7093 - 19 Test Method for Formability of Thin Film Organic Coatings on Steel Over a Biaxially Stretched Dome
  • D7094 - 17a Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
  • D7095 - 17 Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip
  • D7096 - 19 Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography
  • D7097 - 19 Test Method for Determination of Moderately High Temperature Piston Deposits by Thermo-Oxidation Engine Oil Simulation Test—TEOST MHT
  • D7098 - 08(2015) Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B
  • D7099 - 04(2018) Terminology Relating to Frozen Soil and Rock
  • D7100 - 11(2020) Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions
  • D7101 - 13e1 Index Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Soil from Rain Splash and Associated Runoff Under Bench-Scale Conditions
  • D7102 - 17 Guide for Determination of Endotoxin on Sterile Medical Gloves
  • D7103 - 19 Guide for Assessment of Medical Gloves
  • D7105/D7105M - 06(2019)e1 Test Method for Determining the Adhesive and Cohesive Strength Between Materials in Roofing or Waterproofing Membranes and Systems
  • D7106/D7106M - 05(2015)e1 Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes
  • D7108 - 12(2018) Guide for Establishing Qualifications for a Nuclear Coatings Specialist
  • D7109 - 20a Test Method for Shear Stability of Polymer-Containing Fluids Using a European Diesel Injector Apparatus at 30 Cycles and 90 Cycles
  • D7110 - 20 Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
  • D7111 - 16 Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
  • D7112 - 19 Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
  • D7113/D7113M - 10(2016) Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods
  • D7115 - 20 Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading
  • D7116 - 16 Specification for Joint Sealants, Hot Applied, Jet Fuel Resistant Types, for Portland Cement Concrete Pavements
  • D7119/D7119M - 13a Guide for Sampling Spray Polyurethane Foam and Coating in Roofing
  • D7120/D7120M - 10(2017) Guide for Evaluation and Preparation of Roof Membranes for Coating Application
  • D7121 - 05(2018) Test Method for Rubber Property—Resilience Using Schob Type Rebound Pendulum
  • D7122 - 17 Specification for HCFC Blend B (CF3CCl2H, Ar, and CF4)
  • D7123 - 17 Practice for Handling, Transportation, and Storage of HCFC Blend B (CF3CCl 2H, Ar, and CF4)
  • D7124 - 19 Specification for Benzene for Use with Zeolite Based Catalysts
  • D7125 - 17 Specification for Cumene (Isopropylbenzene) Manufactured Via a Zeolite Process
  • D7126 - 15 Test Method for On-Line Colorimetric Measurement of Silica
  • D7127 - 17 Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument
  • D7128 - 18 Guide for Using the Seismic-Reflection Method for Shallow Subsurface Investigation
  • D7132 - 19 Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene Foam
  • D7133 - 16 Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids
  • D7134 - 05(2012) Test Method for Molecular Mass Averages and Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser Desorption/Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS)
  • D7136/D7136M - 20 Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
  • D7137/D7137M - 17 Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates
  • D7138 - 16 Test Method to Determine Melting Temperature of Synthetic Fibers
  • D7139 - 20 Terminology for Cotton Fibers
  • D7140/D7140M - 13(2017) Test Method to Measure Heat Transfer Through Textile Thermal Barrier Materials
  • D7142 - 05(2016) Test Method for Holding Strength of Prong-Ring Attached Snap Fasteners
  • D7143 - 17 Practice for Emission Cells for the Determination of Volatile Organic Emissions from Indoor Materials/Products
  • D7144 - 05a(2016) Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination
  • D7145 - 05(2015) Guide for Measurement of Atmospheric Wind and Turbulence Profiles by Acoustic Means
  • D7147 - 11(2018) Specification for Testing and Establishing Allowable Loads of Joist Hangers
  • D7148 - 19a Test Method for Determining the Ionic Resistivity (ER) of Alkaline Battery Separator Using a Carbon Electrode in an Electrolyte Bath Measuring System
  • D7149 - 05(2016) Practice for Determining the Freeze Thaw Stability of Adhesives
  • D7150 - 13(2020) Test Method for the Determination of Gassing Characteristics of Insulating Liquids Under Thermal Stress
  • D7151 - 15 Test Method for Determination of Elements in Insulating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
  • D7152 - 11(2016)e1 Practice for Calculating Viscosity of a Blend of Petroleum Products
  • D7153 - 15e1 Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)
  • D7154 - 15 Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)
  • D7155 - 20 Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils
  • D7156 - 19 Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine
  • D7157 - 18 Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (n-Heptane Phase Separation; Optical Detection)
  • D7158/D7158M - 20 Test Method for Wind Resistance of Asphalt Shingles (Uplift Force/Uplift Resistance Method)
  • D7160 - 16 Practice for Determination of Expiration Dating for Medical Gloves
  • D7161 - 16 Practice for Determination of Real Time Expiration Dating of Mature Medical Gloves Stored Under Typical Warehouse Conditions
  • D7164 - 10(2015) Practice for On-line/At-line Heating Value Determination of Gaseous Fuels by Gas Chromatography
  • D7165 - 10(2015) Practice for Gas Chromatograph Based On-line/At-line Analysis for Sulfur Content of Gaseous Fuels
  • D7166 - 10(2015) Practice for Total Sulfur Analyzer Based On-line/At-line for Sulfur Content of Gaseous Fuels
  • D7167 - 12(2018) Guide for Establishing Procedures to Monitor the Performance of Safety-Related Coating Service Level III Lining Systems in an Operating Nuclear Power Plant
  • D7168 - 16 Test Method for 99Tc in Water by Solid Phase Extraction Disk
  • D7169 - 20e1 Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography
  • D7171 - 20 Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy
  • D7172 - 14 Test Method for Determining the Relative Density (Specific Gravity) and Absorption of Fine Aggregates Using Infrared
  • D7173 - 20 Practice for Determining the Separation Tendency of Polymer from Polymer-Modified Asphalt
  • D7174 - 05(2016) Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction
  • D7175 - 15 Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
  • D7176 - 06(2018) Specification for Non-Reinforced Polyvinyl Chloride (PVC) Geomembranes Used in Buried Applications
  • D7177/D7177M - 21 Specification for Air Channel Evaluation of Polyvinyl Chloride (PVC) Dual Track Seamed Geomembranes
  • D7178 - 16e1 Practice for Determining the Number of Constrictions “m” of Non-Woven Geotextiles as a Complementary Filtration Property
  • D7179 - 18 Test Method for Determining Geonet Breaking Force
  • D7180/D7180M - 05(2013)e1 Guide for Use of Expanded Polystyrene (EPS) Geofoam in Geotechnical Projects
  • D7181 - 20 Test Method for Consolidated Drained Triaxial Compression Test for Soils
  • D7183 - 18ae1 Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
  • D7184 - 20 Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
  • D7185 - 19 Specification for Low Toluene Low Dioxane (LTLD) Benzene
  • D7186 - 14 Practice for Quality Assurance Observation of Roof Construction and Repair
  • D7187 - 20 Test Method for Measuring Mechanistic Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching
  • D7188 - 05(2019) Terminology for Printing Inks, Materials, and Processes
  • D7189 - 12(2020) Test Method for Relative Mileage of News Ink on Newsprint
  • D7190 - 10(2015) Practice to Evaluate Leaching of Water-Soluble Materials from Latex Paint Films
  • D7191 - 18 Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor
  • D7192 - 20 Test Method for High Speed Puncture Properties of Plastic Films Using Load and Displacement Sensors
  • D7193 - 17 Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape
  • D7194 - 19 Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE)
  • D7195 - 16a Guide for Setting Object Color Specifications
  • D7196 - 18 Test Method for Raveling Test of Cold-Mixed Emulsified Asphalt Samples
  • D7197 - 13 Table of Body Measurements for Misses Maternity Sizes Two to Twenty-Two (2-22)
  • D7198 - 05(2018) Specification for Disposable Embalming Gloves for Single-Use Applications
  • D7199 - 20 Practice for Establishing Characteristic Values for Reinforced Glued Laminated Timber (Glulam) Beams Using Mechanics-Based Models
  • D7200 - 12 Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in Mines and Quarries, by Phase Contrast Microscopy and Transmission Electron Microscopy
  • D7201 - 06(2020) Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in the Workplace, by Phase Contrast Microscopy (with an Option of Transmission Electron Microscopy)
  • D7202 - 15 Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection
  • D7203 - 11(2017) Practice for Screening Trichloroethylene (TCE)-Contaminated Media Using a Heated Diode Sensor
  • D7204 - 15 Practice for Sampling Waste Streams on Conveyors
  • D7205/D7205M - 06(2016) Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
  • D7206/D7206M - 19 Guide for Cyclic Deactivation of Fluid Catalytic Cracking (FCC) Catalysts with Metals
  • D7208 - 14e1 Test Method for Determination of Temporary Ditch Check Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
  • D7210 - 13 Practice for Extraction of Additives in Polyolefin Plastics
  • D7211 - 13(2018) Specification for Parts Machined from Polychlorotrifluoroethylene (PCTFE) and Intended for General Use
  • D7212 - 13(2018) Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter
  • D7213 - 15(2019) Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 °C to 615 °C by Gas Chromatography
  • D7214 - 20 Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
  • D7215 - 16 Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels
  • D7216 - 20a Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers
  • D7217 - 16 Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
  • D7219 - 19 Specification for Isotropic and Near-isotropic Nuclear Graphites
  • D7220 - 12(2017) Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry
  • D7223 - 17 Specification for Aviation Certification Turbine Fuel
  • D7224 - 20 Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable SeparometerD7225 - 13(2019)e1 Guide for Blood Cleaning Efficiency of Detergents and Washer-Disinfectors
  • D7226 - 13(2017) Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
  • D7227/D7227M - 17 Practice for Rapid Drying of Compacted Asphalt Mixture Specimens Using Vacuum Drying Apparatus
  • D7228 - 06a(2020) Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures
  • D7229 - 08(2013)e1 Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor
  • D7230 - 06(2013) Guide for Evaluating Polymeric Lining Systems for Water Immersion in Coating Service Level III Safety-Related Applications on Metal Substrates
  • D7232 - 06(2016) Test Method for Rapid Determination of the Nonvolatile Content of Coatings by Loss in Weight
  • D7233 - 08(2017) Test Method for Testing Fracture of Level Paintbrush Filaments
  • D7234 - 19 Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
  • D7235 - 16 Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
  • D7236 - 16a Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)
  • D7237 - 18 Test Method for Free Cyanide and Aquatic Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
  • D7238 - 20 Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
  • D7239 - 13(2018) Specification for Hybrid Geosynthetic Paving Mat for Highway Applications
  • D7240 - 18 Practice for Electrical Leak Location Using Geomembranes with an Insulating Layer in Intimate Contact with a Conductive Layer via Electrical Capacitance Technique (Conductive-Backed Geomembrane Spark Test)
  • D7241 - 13 Test Method for Pile Thickness of Finished Multilevel Pile Yarn Floor Covering
  • D7242/D7242M - 06(2013)e1 Practice for Field Pneumatic Slug (Instantaneous Change in Head) Tests to Determine Hydraulic Properties of Aquifers with Direct Push Groundwater Samplers
  • D7243 - 11(2020) Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges
  • D7244 - 20 Test Method for Relative Cure of Energy-Cured Inks and Coatings
  • D7245 - 09(2014) Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating
  • D7246 - 06(2015) Test Method for Detection of Holes in Polyethylene Food Service Gloves
  • D7247 - 17 Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
  • D7248/D7248M - 12(2017) Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens
  • D7249/D7249M - 20 Test Method for Facesheet Properties of Sandwich Constructions by Long Beam Flexure
  • D7250/D7250M - 20 Practice for Determining Sandwich Beam Flexural and Shear Stiffness
  • D7252 - 17 Test Method for Polyurethane Raw Materials: Determination of Monomer and Isomers in Isocyanates
  • D7253 - 16 Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols
  • D7254 - 20 Specification for Polypropylene (PP) Siding
  • D7254 - 20 Specification for Polypropylene (PP) Siding
  • D7255 - 20 Test Method for Abrasion Resistance of Leather (Rotary Platform, Abraser Method)
  • D7258 - 17 Specification for Polymeric Piles
  • D7260 - 20 Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants
  • D7261 - 17 Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer
  • D7262 - 10(2016)e1 Test Method for Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids
  • D7263 - 21 Test Methods for Laboratory Determination of Density and Unit Weight of Soil Specimens
  • D7264/D7264M - 15 Test Method for Flexural Properties of Polymer Matrix Composite Materials
  • D7265 - 12(2018) Specification for Hydrogen Thermophysical Property Tables
  • D7266 - 13(2018)e1 Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard)
  • D7267 - 19a Test Method for Edge Ravel Resistance of Finished Loop Pile, Pile Yarn Floor Covering
  • D7268 - 14 Performance Specification for Seamless Knit Garments Including Intimates and Swimwear
  • D7269/D7269M - 20 Test Methods for Tensile Testing of Aramid Yarns
  • D7270 - 07(2013) Guide for Environmental and Performance Verification of Factory-Applied Liquid Coatings
  • D7271 - 06(2020) Test Method for Viscoelastic Properties of Paste Ink Vehicle Using an Oscillatory Rheometer
  • D7272 - 06(2018) Test Method for Determining the Integrity of Seams Used in Joining Geomembranes by Premanufactured Taped Methods
  • D7273/D7273M - 08(2020) Guide for Acceptance Testing Requirements for Geonets and Geonet Drainage Geocomposites
  • D7274 - 06A(2018)e1 Test Method for Mineral Stabilizer Content of Prefabricated Bituminous Geomembranes (PBGMs)
  • D7275 - 07(2018) Test Method for Tensile Properties of Bituminous Geomembranes (BGMs)
  • D7276 - 16 Guide for Analysis and Interpretation of Test Data for Articulating Concrete Block (ACB) Revetment Systems in Open Channel Flow
  • D7277 - 16 Test Method for Performance Testing of Articulating Concrete Block (ACB) Revetment Systems for Hydraulic Stability in Open Channel Flow
  • D7278 - 16 Guide for Prediction of Analyzer Sample System Lag Times
  • D7279 - 20 Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
  • D7280 - 20 Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch by Stainless Steel Crucible Filtration
  • D7281 - 07(2013) Test Method for Determining Water Migration Resistance Through Roof Membranes
  • D7282 - 14 Practice for Set-up, Calibration, and Quality Control of Instruments Used for Radioactivity Measurements
  • D7283 - 17 Test Method for Alpha and Beta Activity in Water By Liquid Scintillation Counting
  • D7284 - 20 Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection
  • D7285 - 06(2017) Guide for Recordkeeping Microfiltration and Ultrafiltration Systems
  • D7290 - 06(2017) Practice for Evaluating Material Property Characteristic Values for Polymeric Composites for Civil Engineering Structural Applications
  • D7291/D7291M - 15 Test Method for Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material
  • D7292 - 18 Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI)
  • D7293 - 19 Specification for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI)
  • D7294 - 13(2021) Guide for Collecting Treatment Process Design Data at a Contaminated Site—A Site Contaminated with Chemicals of Interest
  • D7295 - 18 Practice for Sampling Combustion Effluents and Other Stationary Sources for the Subsequent Determination of Hydrogen Cyanide
  • D7296 - 18 Practice for Collection of Settled Dust Samples Using Dry Wipe Sampling Methods for Subsequent Determination of Beryllium and Compounds
  • D7297 - 14 Practice for Evaluating Residential Indoor Air Quality Concerns
  • D7298 - 06(2017) Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation
  • D7299 - 20 Practice for Verifying Performance of a Vertical Inclinometer Probe
  • D7300 - 18 Test Method for Laboratory Determination of Strength Properties of Frozen Soil at a Constant Rate of Strain
  • D7301 - 11(2015) Specification for Nuclear Graphite Suitable for Components Subjected to Low Neutron Irradiation Dose
  • D7303 - 17 Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry
  • D7304 - 16 Test Method for Determination of Denatonium Ion in Engine Coolant by HPLC
  • D7305 - 08a(2020) Test Method for Reflection Density of Printed Matter
  • D7306 - 07(2017) Practice for Testing Low Temperature Film-Formation of Latex Paints by Visual Observation
  • D7307 - 06(2016) Practice for Sampling of Thermoplastic Traffic Marking Materials
  • D7308 - 17 Practice for Sample Preparation of Thermoplastic Pavement Marking Materials
  • D7309 - 20 Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
  • D7310 - 20 Practice for Defect Detection and Rating of Plastic Films Using Optical Sensors
  • D7313 - 20 Test Method for Determining Fracture Energy of Asphalt Mixtures Using the Disk-Shaped Compact Tension Geometry
  • D7314 - 10(2015) Practice for Determination of the Heating Value of Gaseous Fuels using Calorimetry and On-line/At-line Sampling
  • D7315 - 17 Test Method for Determination of Turbidity Above 1 Turbidity Unit (TU) in Static Mode
  • D7316 - 14 Guide for Interpretation of Existing Field Instrumentation to Influence Emergency Response Decisions
  • D7317 - 07(2019) Test Method for Coagulated Pentane Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method)
  • D7318 - 19e1 Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration
  • D7319 - 17 Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography
  • D7320 - 18 Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine
  • D7321 - 18a Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration
  • D7322/D7322M - 17 Test Method for Determination of Erosion Control Product (ECP) Ability to Encourage Seed Germination and Plant Growth Under Bench-Scale Conditions
  • D7323 - 13 Practice for Handling, Transportation, and Storage of IG-100 (Nitrogen)
  • D7324 - 13 Practice for Handling, Transportation, and Storage of IG-55 Ar N2
  • D7325 - 13 Practice for Handling, Transportation, and Storage of IG-541 N2, Ar , CO2
  • D7326 - 17 Practice for Handling, Transportation, and Storage of HFC Blend B (CH2FCF3, CHF2 CF3, and CO2)
  • D7327 - 17 Specification for HFC Blend B (CH2FCF3, CHF2CF3, and CO2)
  • D7328 - 17 Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injectionaquosa
  • D7329 - 07(2018) Specification for Food Preparation and Food Handling (Food Service) Gloves
  • D7330 - 15 Test Method for Assessment of Surface Appearance Change in Pile Floor Coverings Using Standard Reference Scales
  • D7332/D7332M - 16 Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite
  • D7334 - 08(2013) Practice for Surface Wettability of Coatings, Substrates and Pigments by Advancing Contact Angle Measurement
  • D7336/D7336M - 16 Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials
  • D7337/D7337M - 12(2019) Test Method for Tensile Creep Rupture of Fiber Reinforced Polymer Matrix Composite Bars
  • D7338 - 14 Guide for Assessment Of Fungal Growth in Buildings
  • D7339 - 18 Test Method for Determination of Volatile Organic Compounds Emitted from Carpet using a Specific Sorbent Tube and Thermal Desorption / Gas Chromatography
  • D7340 - 07(2018)e1 Practice for Thermal Conductivity of Leather
  • D7341 - 14 Practice for Establishing Characteristic Values for Flexural Properties of Structural Glued Laminated Timber by Full-Scale Testing
  • D7342 - 20 Test Method for Prolonged Worked Stability of Lubricating Grease in Presence of Water (Water Stability Test)
  • D7343 - 20 Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
  • D7344 - 17a Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Mini Method)
  • D7345 - 17 Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method)
  • D7346 - 15 Test Method for No Flow Point and Pour Point of Petroleum Products and Liquid Fuels
  • D7347 - 15 Test Method for Determination of Olefin Content in Denatured Ethanol by Supercritical Fluid Chromatography
  • D7348 - 13 Test Methods for Loss on Ignition (LOI) of Solid Combustion Residues
  • D7349/D7349M - 15(2019) Test Method for Determining the Capability of Roofing and Waterproofing Materials to Seal Around Fasteners
  • D7351 - 19 Test Method for Determination of Sediment Retention Device (SRD) Effectiveness in Sheet Flow Applications
  • D7352 - 18 Practice for Volatile Contaminant Logging Using a Membrane Interface Probe (MIP) in Unconsolidated Formations with Direct Push Methods
  • D7353 - 07(2013) Practice for Sampling of Liquids in Waste Management Activities Using a Peristaltic Pump
  • D7356/D7356M - 19 Test Method for Accelerated Acid Etch Weathering of Automotive Clearcoats Using a Xenon-Arc Exposure Device
  • D7357 - 07(2019) Specification for Cellulose Fibers for Fiber-Reinforced Concrete
  • D7358 - 07(2018) Test Method for Water Content of Paints by Quantitative Calcium Hydride Reaction Test Kit
  • D7359 - 18 Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
  • D7360 - 16 Test Method for Analysis of Benzene by Gas Chromatography with External Calibration
  • D7361 - 07(2018) Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
  • D7362 - 14 Guide for Rapid Screening of Vegetation for Radioactive Strontium Aerial Deposition
  • D7363 - 13a Test Method for Determination of Parent and Alkyl Polycyclic Aromatics in Sediment Pore Water Using Solid-Phase Microextraction and Gas Chromatography/Mass Spectrometry in Selected Ion Monitoring Mode
  • D7365 - 09a(2015) Practice for Sampling, Preservation and Mitigating Interferences in Water Samples for Analysis of Cyanide
  • D7366 - 08(2019) Practice for Estimation of Measurement Uncertainty for Data from Regression-based Methods
  • D7367 - 19e2 Test Method for Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting
  • D7369 - 20 Test Method for Determining the Resilient Modulus of Asphalt Mixtures by Indirect Tension Test
  • D7370/D7370M - 14 Test Method for Determination of Relative Density and Absorption of Fine, Coarse and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion
  • D7371 - 14 Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
  • D7372 - 17 Guide for Analysis and Interpretation of Proficiency Test Program Results
  • D7373 - 12 Test Method for Predicting Biodegradability of Lubricants Using a Bio-kinetic Model
  • D7374 - 08(2015) Practice for Evaluating Elevated Temperature Performance of Adhesives Used in End-Jointed Lumber
  • D7376 - 10a(2016) Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals
  • D7377 - 09(2018) Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints using a Water Faucet
  • D7378 - 16 Practice for Measurement of Thickness of Applied Coating Powders to Predict Cured Thickness
  • D7379/D7379M - 08(2015)e1 Test Methods for Strength of Modified Bitumen Sheet Material Laps Using Cold Process Adhesive
  • D7380 - 15 Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer
  • D7381 - 07(2013) Practice for Establishing Allowable Stresses for Round Timbers for Piles from Tests of Full-Size Material
  • D7382 - 20 Test Methods for Determination of Maximum Dry Unit Weight of Granular Soils Using a Vibrating Hammer
  • D7383 - 19 Test Methods for Axial Rapid Load (Compressive Force Pulse) Testing of Deep Foundations
  • D7385 - 13 Guide for Estimating Carbon Saturation by Temperature Rise upon Immersion
  • D7386 - 16 Practice for Performance Testing of Packages for Single Parcel Delivery Systems
  • D7387 - 20 Test Method for Vibration Testing of Intermediate Bulk Containers (IBCs) Used for Shipping Liquid Hazardous Materials (Dangerous Goods)
  • D7388 - 18 Specification for Engine Coolant Grade 1,3-Propanediol (PDO)
  • D7389 - 07(2019) Test Method for Acid Number (Empirical) of Maleic Anhydride (MAH) Grafted Waxes
  • D7390 - 18e1 Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments
  • D7391 - 20 Test Method for Categorization and Quantification of Airborne Fungal Structures in an Inertial Impaction Sample by Optical Microscopy
  • D7392 - 20 Practice for PM Detector and Bag Leak Detector Manufacturers to Certify Conformance with Design and Performance Specifications for Cement Plants
  • D7393 - 16(2020) Practice for Indicating Oil in Abrasives
  • D7394 - 18 Practice for Rheological Characterization of Architectural Coatings using Three Rotational Bench Viscometers
  • D7395 - 18 Test Method for Cone/Plate Viscosity at a 500 s-1 Shear Rate
  • D7396 - 14(2020) Guide for Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting
  • D7397 - 20 Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Miniaturized Optical Method)
  • D7398 - 11(2016) Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100 °C to 615 °C by Gas Chromatography
  • D7399 - 18 Test Method for Determination of the Amount of Polypropylene in Polypropylene/Low Density Polyethylene Mixtures Using Infrared Spectrophotometry
  • D7400/D7400M - 19 Test Methods for Downhole Seismic Testing
  • D7402 - 09(2017) Practice for Identifying Cationic Emulsified Asphalts
  • D7403 - 19 Test Method for Determination of Residue of Emulsified Asphalt by Low Temperature Vacuum Distillation
  • D7404 - 19 Test Method for Determination of Emulsified Asphalt Residue by Moisture Balance Analyzer
  • D7405 - 20 Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
  • D7406 - 20 Test Method for Time-Dependent Compressive Deformation Under Constant Pressure for Geosynthetic Drainage Products
  • D7407 - 07(2020) Guide for Determining the Transmission of Gases Through Geomembranes
  • D7408 - 12(2020) Specification for Non-Reinforced PVC (Polyvinyl Chloride) Geomembrane Seams
  • D7409 - 15(2020) Test Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns
  • D7410 - 07(2012) Practice for Qualification of Cotton Classification Instruments for Cotton Marketing
  • D7412 - 18 Test Method for Condition Monitoring of Phosphate Antiwear Additives in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
  • D7414 - 18 Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
  • D7415 - 18 Test Method for Condition Monitoring of Sulfate By-Products in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
  • D7416 - 09(2020) Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Viscometer) Integrated Tester
  • D7417 - 17 Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
  • D7418 - 20 Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
  • D7419 - 18 Test Method for Determination of Total Aromatics and Total Saturates in Lube Basestocks by High Performance Liquid Chromatography (HPLC) with Refractive Index Detection
  • D7420 - 18 Test Method for Determining Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
  • D7421 - 19 Test Method for Determining Extreme Pressure Properties of Lubricating Oils Using High-Frequency, Linear-Oscillation (SRV) Test Machine
  • D7422 - 19 Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine
  • D7423 - 17 Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection
  • D7425/D7425M - 13(2019) Specification for Spray Polyurethane Foam Used for Roofing Applications
  • D7426 - 08(2013) Test Method for Assignment of the DSC Procedure for Determining Tg of a Polymer or an Elastomeric Compound
  • D7427 - 16 Test Method for Immunological Measurement of Four Principal Allergenic Proteins (Hev b 1, 3, 5 and 6.02) in Hevea Natural Rubber and Its Products Derived from Latex
  • D7428 - 15 Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
  • D7430/D7430M - 20 Practice for Mechanical Sampling of Coal
  • D7433 - 19 Test Method for Measuring Surface Water Absorption of Overlaid Wood-Based Panels
  • D7436 - 17 Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology
  • D7437 - 08(2019) Test Method for Temperature and Hard Water Stability of Engine Coolants
  • D7438 - 20 Practice for Field Calibration and Application of Hand-Held Moisture Meters
  • D7439 - 14 Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry
  • D7440 - 08(2015)e1 Practice for Characterizing Uncertainty in Air Quality Measurements
  • D7442 - 16 Practice for Sample Preparation of Fluid Catalytic Cracking Catalysts and Zeolites for Elemental Analysis by Inductively Coupled Plasma Optical Emission Spectroscopy
  • D7444 - 18a Practice for Heat and Humidity Aging of Oxidatively Degradable Plastics
  • D7445 - 18 Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding)
  • D7446 - 09(2017) Specification for Structural Insulated Panel (SIP) Adhesives for Laminating Oriented Strand Board (OSB) to Rigid Cellular Polystryene Thermal Insulation Core Materials
  • D7447 - 08(2014) Practice for Symbolizing Adhesive Applications
  • D7448 - 16 Practice for Establishing the Competence of Laboratories Using ASTM Procedures in the Sampling and Analysis of Coal and Coke
  • D7449/D7449M - 14 Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Coaxial Air Line
  • D7450 - 19 Specification for Performance of Rear Axle Gear Lubricants Intended for API Category GL-5 Service
  • D7451 - 20 Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark-Ignition Engine Fuels
  • D7452 - 19 Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading
  • D7453 - 18 Practice for Sampling of Petroleum Products for Analysis by Process Stream Analyzers and for Process Stream Analyzer System Validation
  • D7454 - 19 Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
  • D7455 - 19 Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis
  • D7458 - 14 Test Method for Determination of Beryllium in Soil, Rock, Sediment, and Fly Ash Using Ammonium Bifluoride Extraction and Fluorescence Detection
  • D7459 - 08(2016) Practice for Collection of Integrated Samples for the Speciation of Biomass (Biogenic) and Fossil-Derived Carbon Dioxide Emitted from Stationary Emissions Sources
  • D7463 - 18 Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water
  • D7464 - 20 Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing
  • D7465/D7465M - 15(2019) Specification for Ethylene Propylene Diene Terpolymer (EPDM) Sheet Used In Geomembrane Applications
  • D7466/D7466M - 10(2015)e1 Test Method for Measuring Asperity Height of Textured Geomembranes
  • D7467 - 20a Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
  • D7468 - 20 Test Method for Cummins ISM Test
  • D7469 - 16 Test Methods for End-Joints in Structural Wood Products
  • D7470 - 08(2015) Practice for Evaluating Elevated Temperature Performance of End-Jointed Lumber Studs
  • D7471 - 19 Specification for CPT-Fluoropolymer Molding and Extrusion Materials
  • D7472 - 19 Specification for EFEP-Fluoropolymer Molding and Extrusion Materials
  • D7473 - 12 Test Method for Weight Attrition of Plastic Materials in the Marine Environment by Open System Aquarium Incubations
  • D7474 - 17 Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents
  • D7475 - 20 Test Method for Determining the Aerobic Degradation and Anaerobic Biodegradation of Plastic Materials under Accelerated Bioreactor Landfill Conditions
  • D7476 - 08(2020) Test Method for Brine Saturation Value of Cured (Salt-Preserved) Hides and Skins
  • D7477 - 16 Test Method for Determining the Area Stability of Wet Blue Submersed in Boiling Water
  • D7478/D7478M - 11(2017) Specification for Heavy Duty Sheathed Wood Crates
  • D7480 - 08(2014) Guide for Evaluating the Attributes of a Forest Management Plan
  • D7481 - 18 Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder
  • D7482 - 17 Practice for Sampling, Storage, and Handling of Hydrocarbons for Mercury Analysis
  • D7483 - 21 Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
  • D7484 - 21 Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine
  • D7485 - 16 Test Method for Determination of Nonylphenol, p-tert-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry
  • D7486 - 14 Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
  • D7487 - 18 Practice for Polyurethane Raw Materials: Polyurethane Foam Cup Test
  • D7488 - 11(2016) Test Method for Open Time of Latex Paints
  • D7489 - 09(2017) Practice for Evaluating Touch-Up Properties of Architectural Coatings under Various Environmental Conditions
  • D7490 - 13 Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements
  • D7491 - 08(2015) Guide for Management of Non-Conforming Coatings in Coating Service Level I Areas of Nuclear Power Plants
  • D7492/D7492M - 16a Guide for Use of Drainage System Media with Waterproofing Systems
  • D7493 - 14(2018) Test Method for Online Measurement of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatograph and Electrochemical Detection
  • D7495 - 12(2019) Specification for Minimum Requirements for Accreditation Bodies That Accredit Agencies Testing and Inspecting Road and Paving Materials
  • D7496 - 18 Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer
  • D7497 - 09(2016) Practice for Recovering Residue from Emulsified Asphalt Using Low Temperature Evaporative Technique
  • D7498/D7498M - 09(2014)e1 Test Method for Vertical Strip Drains Using a Large Scale Consolidation Test
  • D7499/D7499M - 09(2014) Test Method for Measuring Geosynthetic-Soil Resilient Interface Shear Stiffness
  • D7500 - 15(2019) Test Method for Determination of Boiling Range Distribution of Distillates and Lubricating Base Oils—in Boiling Range from 100 °C to 735 °C by Gas Chromatography
  • D7501 - 18a Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT)
  • D7503 - 18 Test Method for Measuring the Exchange Complex and Cation Exchange Capacity of Inorganic Fine-Grained Soils
  • D7504 - 20 Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
  • D7505/D7505M - 17 Specification for Self-Adhesive Polyester Fabric Reinforced Polymer Modified Asphalt Steep Slope Roll Roofing Surfaced with Mineral Granules
  • D7506/D7506M - 17 Test Method for Pocket Reinforcement
  • D7507 - 14 Specification for Woven High Stretch Fabrics Used in Apparel
  • D7508/D7508M - 20 Specification for Polyolefin Chopped Strands for Use in Concrete
  • D7509 - 09(2015) Specification for Fluorocarbon Feedstock Grade Chloroform
  • D7510 - 10(2016)e1 Practice for Performing Detection and Quantitation Estimation and Data Assessment Utilizing DQCALC Software, based on ASTM Practices D6091 and D6512 of Committee D19 on Water
  • D7511 - 12(2017)e1 Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
  • D7512 - 09(2015) Guide for Monitoring of Suspended-Sediment Concentration in Open Channel Flow Using Optical Instrumentation
  • D7513 - 17 Test Method for Capacity of Mixed Bed Ion Exchange Cartridges
  • D7514 - 14 Test Method for Evaluating Ink Stainblocking of Architectural Paint Systems by Visual Assessment
  • D7515 - 19 Test Method for Purity of 1,3-Propanediol (Gas Chromatographic Method)
  • D7517 - 19 Specification for Fully-Formulated 1,3 Propanediol (PDO) Base Engine Coolant for Heavy-Duty Engines
  • D7518 - 20 Specification for 1,3 Propanediol (PDO) Base Engine Coolant for Automobile and Light-Duty Service
  • D7520 - 16 Test Method for Determining the Opacity of a Plume in the Outdoor Ambient Atmosphere
  • D7521 - 16 Test Method for Determination of Asbestos in Soil
  • D7522/D7522M - 15 Test Method for Pull-Off Strength for FRP Laminate Systems Bonded to Concrete Substrate
  • D7524 - 20 Test Method for Determination of Static Dissipater Additives (SDA) in Aviation Turbine Fuel and Middle Distillate Fuels—High Performance Liquid Chromatograph (HPLC) Method
  • D7525 - 14(2019)e1 Test Method for Oxidation Stability of Spark Ignition Fuel—Rapid Small Scale Oxidation Test (RSSOT)
  • D7527 - 10(2018) Test Method for Measurement of Antioxidant Content in Lubricating Greases by Linear Sweep Voltammetry
  • D7528 - 21 Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus
  • D7530/D7530M - 17 Specification for Self-Adhesive Glass Fiber Fabric Reinforced Polymer Modified Asphalt Steep Slope Roll Roofing Surfaced with Mineral Granules
  • D7532 - 09(2016) Practice for Determination of Re-tack Ability of Carpet Adhesives
  • D7535 - 09(2015) Test Method for Lead-210 in Water
  • D7536 - 20 Test Method for Chlorine in Aromatics by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
  • D7538 - 09(2018) Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints Using an Atomizing Spray Device
  • D7539 - 10(2020) Practice for Using a Test Chamber for Humidity Conditioning of Test Panels of Pavement Marking Paints
  • D7540 - 09(2019) Practice for Dispersion of Chromatic Pigments with a Mechanical Muller
  • D7541 - 11(2015) Practice for Estimating Critical Surface Tensions
  • D7542 - 15 Test Method for Air Oxidation of Carbon and Graphite in the Kinetic Regime
  • D7544 - 12(2017) Specification for Pyrolysis Liquid Biofuel
  • D7545 - 14(2019)e1 Test Method for Oxidation Stability of Middle Distillate Fuels—Rapid Small Scale Oxidation Test (RSSOT)
  • D7546 - 15 Test Method for Determination of Moisture in New and In-Service Lubricating Oils and Additives by Relative Humidity Sensor
  • D7547 - 18a Specification for Hydrocarbon Unleaded Aviation Gasoline
  • D7548 - 16a Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products
  • D7549 - 19 Test Method for Evaluation of Heavy-Duty Engine Oils under High Output Conditions—Caterpillar C13 Test Procedure
  • D7551 - 10(2015) Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases and Natural Gas by Ultraviolet Fluorescence
  • D7552 - 09(2014) Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer
  • D7553 - 15 Test Method for Solubility of Asphalt Materials in N-Propyl Bromide
  • D7556 - 10(2019) Test Methods for Determining Small-Strain Tensile Properties of Geogrids and Geotextiles by In-Air Cyclic Tension Tests
  • D7557/D7557M - 09(2013)e1 Practice for Sampling of Expanded Polystyrene Geofoam Specimens
  • D7558 - 09(2019) Test Method for Colorimetric/Spectrophotometric Procedure to Quantify Extractable Chemical Dialkyldithiocarbamate, Thiuram, and Mercaptobenzothiazole Accelerators in Natural Rubber Latex and Nitrile Gloves
  • D7559/D7559M - 09(2020) Test Method for Determining Pressure Decay of Inflatable Restraint Cushions
  • D7560 - 16 Test Method for Determination of Fiber Length Percentages in Hydraulic Erosion Control Products (HECPs)
  • D7563 - 10(2016) Test Method for Evaluation of the Ability of Engine Oil to Emulsify Water and Simulated Ed85 Fuel
  • D7564/D7564M - 16 Practice for Construction of Asphalt-Rubber Cape Seal
  • D7565/D7565M - 10(2017) Test Method for Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures
  • D7566 - 20c Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
  • D7568 - 17 Specification for Polyethylene-Based Structural-Grade Plastic Lumber for Outdoor Applications
  • D7569/D7569M - 10(2015)e1 Practice for Determination of Gas Content of Coal—Direct Desorption Method
  • D7570 - 17 Test Method for Evaluation of Dimensional Stability of Pile Yarn Floor Covering
  • D7571 - 20 Specification for Retained Sewn Seam Strength After Exposures to Hot Air and Open Flame
  • D7572 - 15 Guide for Recovery of Aqueous Cyanides by Extraction from Mine Rock and Soil
  • D7573 - 18ae1 Test Method for Total Carbon and Organic Carbon in Water by High Temperature Catalytic Combustion and Infrared Detection
  • D7574 - 16 Test Method for Determination of Bisphenol A in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry
  • D7575 - 11(2017) Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination
  • D7576 - 16 Test Method for Determination of Benzene and Total Aromatics in Denatured Fuel Ethanol by Gas Chromatography
  • D7577 - 12(2016) Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends
  • D7578 - 20 Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants
  • D7579 - 09(2019) Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol
  • D7582 - 15 Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis
  • D7583 - 16 Test Method for John Deere Coolant Cavitation Test
  • D7584 - 16 Test Method for Evaluating the Resistance of the Surface of Wet Blue and Wet White to the Growth of Fungi in an Environmental Chamber
  • D7585/D7585M - 10(2015) Practice for Evaluating Retroreflective Pavement Markings Using Portable Hand-Operated Instruments
  • D7588 - 11(2018) Guide for FT-IR Fingerprinting of a Non-Aqueous Liquid Paint as Supplied in the Manufacturer's Container
  • D7589 - 16 Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine
  • D7590 - 09(2014) Guide for Measurement of Remaining Primary Antioxidant Content In In-Service Industrial Lubricating Oils by Linear Sweep Voltammetry
  • D7591 - 12(2017) Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography
  • D7593 - 14 Test Method for Determination of Fuel Dilution for In-Service Engine Oils by Gas Chromatography
  • D7594 - 19 Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian Contact Pressures Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
  • D7596 - 14 Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
  • D7597 - 16(2017) Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Hydrogen Dimethylamidophosphate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Water by Liquid Chromatography/Tandem Mass Spectrometry
  • D7598 - 16(2017) Test Method for Determination of Thiodiglycol in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry
  • D7599 - 16(2017) Test Method for Determination of Diethanolamine, Triethanolamine, N-Methyldiethanolamine and N-Ethyldiethanolamine in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
  • D7600 - 16(2017) Test Method for Determination of Aldicarb, Carbofuran, Oxamyl and Methomyl by Liquid Chromatography/Tandem Mass Spectrometry
  • D7601 - 19 Practice for Pressure Driven Membrane Separation Element/Bundle Evaluation
  • D7602 - 11(2017) Practice for Installation of Vulcanized Rubber Linings
  • D7603 - 13 Test Method for Determination of Storage Stability and Compatibility in Automotive Gear Oils
  • D7605 - 11(2016) Test Method for Thermoplastic Elastomers—Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
  • D7606 - 17 Practice for Sampling of High Pressure Hydrogen and Related Fuel Cell Feed Gases
  • D7607/D7607M - 19 Test Method for Analysis of Oxygen in Gaseous Fuels (Electrochemical Sensor Method)
  • D7608 - 18 Test Method for Torsional Ring Shear Test to Measure Drained Fully Softened Shear Strength and Stress Dependent Strength Envelope of Fine-Grained Soils
  • D7611/D7611M - 20 Practice for Coding Plastic Manufactured Articles for Resin Identification
  • D7612 - 10(2015) Practice for Categorizing Wood and Wood-Based Products According to Their Fiber Sources
  • D7613 - 17(2019) Specification for Flexible Polypropylene Reinforced (fPP-R) and Nonreinforced (fPP) Geomembranes
  • D7614 - 20 Test Method for Determination of Total Suspended Particulate (TSP) Hexavalent Chromium in Ambient Air Analyzed by Ion Chromatography (IC) and Spectrophotometric Measurements
  • D7615/D7615M - 19 Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates
  • D7616/D7616M - 11(2017) Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures
  • D7617/D7617M - 11(2017) Test Method for Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars
  • D7618 - 13(2017) Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel
  • D7619 - 17 Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
  • D7620 - 10(2020) Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection
  • D7621 - 16 Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction
  • D7622 - 20 Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction
  • D7623 - 20 Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method
  • D7624 - 18 Test Method for Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
  • D7626 - 19e1 Test Methods for Determining the Organic Treat Loading of Organophilic Clay
  • D7633 - 13(2018) Test Method for Carbon Black—Carbon Content
  • D7634 - 10(2017) Test Method for Visualizing Particulate Sizes and Morphology of Particles Contained in Hydrogen Fuel by Microscopy
  • D7635/D7635M - 18 Test Method for Measurement of Thickness of Coatings Over Fabric Reinforcement
  • D7636/D7636M - 11(2019) Practice for Sampling and Analysis of Modified Bitumen Roof Systems
  • D7637 - 10(2015) Test Method for Determination of Glycerin Assay by Titration (Sodium Meta Periodate)
  • D7638 - 10(2015) Test Method for Determination of Fatty Acids and Esters in Glycerin
  • D7639 - 10(2018) Test Method for Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence
  • D7640 - 16 Specification for Engine Coolant Grade Glycerin
  • D7641 - 10(2014)e1 Guide for Textile Fibers
  • D7642 - 12(2020) Practice for Establishment of Calibration Cottons for Cotton Classification Instruments
  • D7643 - 16 Practice for Determining the Continuous Grading Temperatures and Continuous Grades for PG Graded Asphalt Binders
  • D7644 - 16 Test Method for Determination of Bromadiolone, Brodifacoum, Diphacinone and Warfarin in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
  • D7645 - 16 Test Method for Determination of Aldicarb, Aldicarb Sulfone, Aldicarb Sulfoxide, Carbofuran, Methomyl, Oxamyl, and Thiofanox in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
  • D7646 - 10(2019) Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
  • D7647 - 10(2018) Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction
  • D7648/D7648M - 18 Practice for Active Soil Gas Sampling for Direct Push or Manual-Driven Hand-Sampling Equipment
  • D7649 - 19 Test Method for Determination of Trace Carbon Dioxide, Argon, Nitrogen, Oxygen and Water in Hydrogen Fuel by Jet Pulse Injection and Gas Chromatography/Mass Spectrometer Analysis
  • D7650 - 13 Test Method for Sampling of Particulate Matter in High Pressure Hydrogen used as a Gaseous Fuel with an In-Stream Filter
  • D7651 - 17 Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel
  • D7653 - 18 Test Method for Determination of Trace Gaseous Contaminants in Hydrogen Fuel by Fourier Transform Infrared (FTIR) Spectroscopy
  • D7654/D7654M - 10(2018) Specification for Asphalt Used in Roofing Measured by Dynamic Shear Rheometer
  • D7655/D7655M - 12(2017) Classification for Size of Aggregate Used as Ballast for Membrane Roof Systems
  • D7658 - 17 Test Method for Direct Microscopy of Fungal Structures from Tape
  • D7659 - 10(2015) Guide for Strategies for Surface Sampling of Metals and Metalloids for Worker Protection
  • D7660 - 20 Guide for Conducting Internal Pressure Tests on United Nations (UN) Packagings
  • D7661 - 18 Test Method for Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms
  • D7662 - 15(2020) Test Method for Carbon Content in Carbon Black Feedstock Oils
  • D7663 - 12(2018)e1 Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations
  • D7664 - 10(2018)e1 Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils
  • D7665 - 17 Guide for Evaluation of Biodegradable Heat Transfer Fluids
  • D7666 - 12(2019) Specification for Triglyceride Burner Fuel
  • D7667 - 10(2015) Test Method for Determination of Corrosiveness to Silver by Automotive Spark-Ignition Engine Fuel—Thin Silver Strip Method
  • D7668 - 17 Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
  • D7669 - 20 Guide for Practical Lubricant Condition Data Trend Analysis
  • D7670 - 10(2017) Practice for Processing In-service Fluid Samples for Particulate Contamination Analysis Using Membrane Filters
  • D7671 - 10(2015) Test Method for Corrosiveness to Silver by Automotive Spark–Ignition Engine Fuel–Silver Strip Method
  • D7672 - 19 Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies
  • D7673/D7673M - 15 Specification for Halon 1211, Bromochlorodifluoromethane (CF2BrCl)
  • D7674 - 14a Test Method for Hexane/Petroleum Ether Extract in Wet Blue and Wet White
  • D7675 - 15 Test Method for Determination of Total Hydrocarbons in Hydrogen by FID-Based Total Hydrocarbon (THC) Analyzer
  • D7676 - 18 Practice for Screening Organic Halides Contained in Hydrogen or Other Gaseous Fuels
  • D7677 - 16 Test Method for the Continuous Measurement of Dissolved Ozone in Low Conductivity Water
  • D7678 - 17 Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbons (TPH) in Water and Wastewater with Solvent Extraction using Mid-IR Laser Spectroscopy
  • D7679 - 16(2020) Test Method for Sulfur Content in Carbon Black Feedstock Oils
  • D7680 - 10(2020) Practice for Preparing Prints of Paste Printing Inks by a Motor-Driven Printability Tester
  • D7681 - 11(2016)e1 Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer
  • D7682 - 17 Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty
  • D7683 - 20 Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Small Test Jar Method)
  • D7684 - 11(2020) Guide for Microscopic Characterization of Particles from In-Service Lubricants
  • D7685 - 11(2016) Practice for In-Line, Full Flow, Inductive Sensor for Ferromagnetic and Non-ferromagnetic Wear Debris Determination and Diagnostics for Aero-Derivative and Aircraft Gas Turbine Engine Bearings
  • D7686 - 19 Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) Instrument
  • D7687 - 17 Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration
  • D7688 - 18 Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) by Visual Observation
  • D7689 - 20 Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Mini Method)
  • D7690 - 11(2017) Practice for Microscopic Characterization of Particles from In-Service Lubricants by Analytical Ferrography
  • D7691 - 16 Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
  • D7693/D7693M - 15 Guide for Application of Heat Weldable Modified Bituminous Waterproofing Membranes Systems for New Concrete Decks
  • D7694/D7694M - 18 Test Methods for Self-Adhesive Modified Bituminous Sheet Material
  • D7698 - 20 Test Method for In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method
  • D7699/D7699M - 20 Practice for Minimum Geospatial Data for Abandoned Mine Land Problem Areas, Planning Units, Keyword Features, and Project Sites
  • D7700 - 15 Guide for Selecting Test Methods for Geomembrane Seams
  • D7702/D7702M - 14 Guide for Considerations When Evaluating Direct Shear Results Involving Geosynthetics
  • D7703 - 16 Practice for Electrical Leak Location on Exposed Geomembranes Using the Water Lance Method
  • D7704 - 16 Test Method for Total Aldehydes in Styrene Monomer by Potentiometric Titration
  • D7705/D7705M - 12(2019) Test Method for Alkali Resistance of Fiber Reinforced Polymer (FRP) Matrix Composite Bars used in Concrete Construction
  • D7706 - 17 Practice for Rapid Screening of VOC Emissions from Products Using Micro-Scale Chambers
  • D7707 - 11(2016) Specification for Wipe Sampling Materials for Beryllium in Surface Dust
  • D7708 - 14 Test Method for Microscopical Determination of the Reflectance of Vitrinite Dispersed in Sedimentary Rocks
  • D7709 - 12(2017) Test Methods for Measuring Water Vapor Transmission Rate (WVTR) of Pharmaceutical Bottles and Blisters
  • D7710 - 14 Test Method for Determination of Volume and Density of Rigid and Irregularly Shaped Molded Cellular Materials
  • D7711 - 11(2015) Guide for Description of Polymer Pellet Defects
  • D7712 - 18 Terminology for Sampling and Analysis of Asbestos
  • D7713 - 18 Specification for Aqueous Engine Coolant Grade Glycol (53 % by Volume Nominal)
  • D7714 - 11(2016)e1 Specification for Glycerin Base Engine Coolant for Automobile and Light-Duty Service
  • D7715 - 12(2016)e1 Specification for Fully-Formulated Glycerin Base Engine Coolant for Heavy-Duty Engines
  • D7716 - 11a(2020) Test Method for Determination of Residual Methanol in Glycerin by Gas Chromatography
  • D7717 - 11(2017) Practice for Preparing Volumetric Blends of Denatured Fuel Ethanol and Gasoline Blendstocks for Laboratory Analysis
  • D7718 - 11(2019) Practice for Obtaining In-Service Samples of Lubricating Grease
  • D7719 - 18 Specification for High Aromatic Content Unleaded Hydrocarbon Aviation Gasoline
  • D7720 - 11(2017) Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination
  • D7721 - 17 Practice for Determining the Effect of Fluid Selection on Hydraulic System or Component Efficiency
  • D7722 - 17 Terminology Relating to Industrial Textile Stitches and Seams
  • D7723 - 19 Test Method for Rubber Property—Macro-Dispersion of Fillers in Compounds
  • D7724 - 18e1 Test Method for Carbon Black—Non-Dispersible Matter by Mechanical Flushing (NDM)
  • D7725 - 17 Test Method for the Continuous Measurement of Turbidity Above 1 Turbidity Unit (TU)
  • D7726 - 11(2016)e1 Guide for The Use of Various Turbidimeter Technologies for Measurement of Turbidity in Water
  • D7727 - 11(2016) Practice for Calculation of Dose Equivalent Xenon (DEX) for Radioactive Xenon Fission Products in Reactor Coolant
  • D7728 - 18 Guide for Selection of ASTM Analytical Methods for Implementation of International Cyanide Management Code Guidance
  • D7729 - 12(2018)e1 Practice for Determining and Expressing Precision of Measurement Results, in the Analysis of Water, as Relative Standard Deviation, Utilizing DQCALC Software
  • D7730 - 17 Test Method for Determination of Dioctyl Sulfosuccinate in Sea Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
  • D7731 - 17 Test Method for Determination of Dipropylene Glycol Monobutyl Ether and Ethylene Glycol Monobutyl Ether in Sea Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
  • D7733 - 12(2016) Specification for Acrylic Dispersion Ground
  • D7734/D7734M - 13(2020) Test Method for Determination of Open Time of Oxidative Printing Inks and Overprint Varnishes by a Manual Method
  • D7735 - 17 Test Method for Type A Durometer Hardness Testing of Thermoplastic Pavement Marking at Elevated Temperatures
  • D7736 - 19a Test Method for Determination of Acids and Glycol Esters in Glycols
  • D7737/D7737M - 15 Test Method for Individual Geogrid Junction Strength
  • D7739 - 11(2020) Practice for Thermal Oxidative Stability Measurement via Quartz Crystal Microbalance
  • D7740 - 20 Practice for Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants
  • D7741/D7741M - 18 Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Handheld Viscometer
  • D7742 - 17 Practice for Determination of Nonylphenol Polyethoxylates (NPnEO, 3 ≤ n ≤ 18) and Octylphenol Polyethoxylates (OPnEO, 2 ≤ n ≤ 12) in Water by Single Reaction Monitoring (SRM) Liquid Chromatography/ Tandem Mass Spectrometry (LC/MS/MS)
  • D7743 - 12 Test Method for Measuring the Minimum Fluidization Velocities of Free Flowing Powders
  • D7744/D7744M - 20 Test Methods for Tensile Testing of High Performance Polyethylene Films
  • D7745 - 19 Practice for Testing Pultruded Composites
  • D7746 - 11(2016) Practice for Calculating the Superimposed Load on Wood-frame Floor-Ceiling Assemblies for Standard Fire-Resistance Tests
  • D7747/D7747M - 11(2018) Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Strip Tensile Method
  • D7748/D7748M - 14e1 Test Method for Flexural Rigidity of Geogrids, Geotextiles and Related Products
  • D7749 - 11(2018) Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Grab Method
  • D7750 - 12(2017) Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer
  • D7751 - 16 Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis
  • D7752 - 18 Practice for Evaluating Compatibility of Mixtures of Hydraulic Fluids
  • D7753 - 12(2020) Test Method for Hydrocarbon Types and Benzene in Light Petroleum Distillates by Gas Chromatography
  • D7754 - 19 Test Method for Determination of Trace Oxygenates in Automotive Spark-Ignition Engine Fuel by Multidimensional Gas Chromatography
  • D7755 - 11(2017) Practice for Determining the Wear Volume on Standard Test Pieces Used by High-Frequency, Linear-Oscillation (SRV) Test Machine
  • D7756 - 19 Test Method for Residues in Liquefied Petroleum (LP) Gases by Gas Chromatography with Liquid, On-Column Injection
  • D7757 - 17 Test Method for Silicon in Gasoline and Related Products by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
  • D7758 - 17 Practice for Passive Soil Gas Sampling in the Vadose Zone for Source Identification, Spatial Variability Assessment, Monitoring, and Vapor Intrusion Evaluations
  • D7759/D7759M - 14 Guide for Nuclear Surface Moisture and Density Gauge Calibration
  • D7760 - 18 Test Method for Measurement of Hydraulic Conductivity of Materials Derived from Scrap Tires Using a Rigid Wall Permeameter
  • D7762 - 18 Practice for Design of Stabilization of Soil and Soil-Like Materials with Self-Cementing Fly Ash
  • D7764 - 20 Practice for Pre-Installation Acceptance Testing of Vibrating Wire Piezometers
  • D7765 - 18a Practice for Use of Foundry Sand in Structural Fill and Embankments
  • D7766/D7766M - 16 Practice for Damage Resistance Testing of Sandwich Constructions
  • D7767 - 11(2018) Test Method to Measure Volatiles from Radiation Curable Acrylate Monomers, Oligomers, and Blends and Thin Coatings Made from Them
  • D7768 - 12(2018) Test Method for Speciated Organic Volatile Content of Waterborne Multi-Component Coatings by Gas Chromatography
  • D7770 - 12(2019) Test Method for Collection of Volatile Organic Compounds Emitted During Simulated Manufacturing of Engineered Wood Products Via a Sealed Caul Plate Method
  • D7771 - 17a Test Method for Determination of Benzo-α-Pyrene (BaP) Content in Carbon Black
  • D7772 - 15(2019) Test Method for Carbon Black Extractables – Absorbance of Cyclohexane Extract
  • D7773 - 19 Test Method for Determination of Volatile Inorganic Acids (HCl, HBr, and HNO3) Using Filter Sampling and Suppressed Ion Chromatography
  • D7774 - 17 Test Method for Flexural Fatigue Properties of Plastics
  • D7775 - 16 Guide for Measurements on Small Graphite Specimens
  • D7777 - 13(2018)e1 Test Method for Density, Relative Density, or API Gravity of Liquid Petroleum by Portable Digital Density Meter
  • D7778 - 15 Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
  • D7779 - 20 Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature
  • D7780 - 20 Practice for Minimum Geospatial Data for Representing Coal Mining Features
  • D7781 - 14 Test Method for Nitrite-Nitrate in Water by Nitrate Reductase
  • D7782 - 13 Practice for Determination of the 99 %/95 % Critical Level (WCL) and a Reliable Detection Estimate (WDE) Based on Within-laboratory Data
  • D7783 - 13 Practice for Determination of the 99 %/95 % Critical Level (WCL) and a Reliable Detection Estimate (WDE) Based on Within-laboratory Data
  • D7784 - 20 Practice for the Rapid Assessment of Gamma-ray Emitting Radionuclides in Environmental Media by Gamma Spectrometry
  • D7785 - 12 Test Method for Water in Lint Cotton by Oven Evaporation Combined with Volumetric Karl Fischer Titration
  • D7786 - 13(2019) Test Method for Determining Enamel Holdout
  • D7787/D7787M - 13 Practice for Selecting Wood Substrates for Weathering Evaluations of Architectural Coatings
  • D7788 - 14 Practice for Collection of Total Airborne Fungal Structures via Inertial Impaction Methodology
  • D7789 - 12 Practice for Collection of Fungal Material from Surfaces by Swab
  • D7790 - 19 Guide for Preparation of Plastic Packagings Containing Liquids for United Nations (UN) Drop Testing
  • D7791 - 17 Test Method for Uniaxial Fatigue Properties of Plastics
  • D7792/D7792M - 15 Practice for Freeze/Thaw Conditioning of Pultruded Fiber Reinforced Polymer (FRP) Composites Used in Structural Designs
  • D7793 - 20 Specification for Insulated Vinyl Siding
  • D7794 - 20 Practice for Blending Mid-Level Ethanol Fuel Blends for Flexible-Fuel Vehicles with Automotive Spark-Ignition Engines
  • D7795 - 15 Test Method for Acidity in Ethanol and Ethanol Blends by Titration
  • D7796 - 17 Test Method for Analysis of Ethyl tert-Butyl Ether (ETBE) by Gas Chromatography
  • D7797 - 18 Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
  • D7798 - 20 Test Method for Boiling Range Distribution of Petroleum Distillates with Final Boiling Points up to 538 °C by Ultra Fast Gas Chromatography (UF GC)
  • D7799 - 12a Specification for Tufted and Woven Broadloom Carpet Adhesives Without Homogenous PVC or Non-PVC Backings
  • D7800/D7800M - 14 Test Method for Determination of Elemental Sulfur in Natural Gas
  • D7801 - 17 Terminology for Paint Brush Application Tools
  • D7802 - 12(2016) Terminology for Paint Roller Application Tools
  • D7803 - 19 Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Powder Coating
  • D7804 - 12(2017) Test Method for Fiber Shedding of Paint Roller Covers
  • D7805 - 13 Terminology for Printing Ink Vehicles and Related Materials
  • D7806 - 20 Test Method for Determination of Biodiesel (Fatty Acid Methyl Ester) and Triglyceride Content in Diesel Fuel Oil Using Mid-Infrared Spectroscopy (FTIR Transmission Method)
  • D7807 - 20 Test Method for Determination of Boiling Range Distribution of Hydrocarbon and Sulfur Components of Petroleum Distillates by Gas Chromatography and Chemiluminescence Detection
  • D7808 - 18 Practice for Determining the Site Precision of a Process Stream Analyzer on Process Stream Material
  • D7811 - 13(2017) Test Method for Bow and Skew Using a Measuring Tool
  • D7812 - 16 Test Method for Tensile Testing of Aramid Paper
  • D7815 - 17 Practice for Handling, Transportation, and Storage of Halon 1211, Bromochlorodifluoromethane (CF2BrCl)
  • D7816 - 12(2016) Test Method for Enumeration of Halophilic and Proteolytic Bacteria in Raceway Brine, Brine-Cured Hides and Skins
  • D7817 - 12(2016) Test Method for Enumeration of Yeast and Mold in Raceway Brine, Brine-Cured Hides and Skins
  • D7818 - 12(2016) Test Method for Enumeration of Proteolytic Bacteria in Fresh (Uncured) Hides and Skins
  • D7819 - 12(2016) Test Method for Enumeration of Yeast and Mold on Fresh (Uncured) Hides and Skins
  • D7820 - 19 Test Method for Engine Coolant Corrosion Protection Under Accelerated Thermal and Oxidizing Conditions Using a Rotating Pressure Vessel
  • D7821 - 12(2018) Test Method for Field Test Determination of Urea Concentration in Diesel Exhaust Fluid (DEF)
  • D7822 - 18 Practice for Dermal Wipe Sampling for the Subsequent Determination of Metals and Metalloids
  • D7823 - 20 Test Method for Determination of Low Level Phthalates in Poly (Vinyl Chloride) Plastics by Thermal Desorption—Gas Chromatography/Mass Spectrometry
  • D7825 - 18 Practice for Generating a Process Stream Property Value through Application of a Process Stream Analyzer
  • D7826 - 20a Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives
  • D7827 - 19 Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene from Heavy Fuel Oils as Separability Number by an Optical Device
  • D7828 - 12 Test Method for Determination of Residue Composition in Liquefied Petroleum Gas (LPG) Using Automated Thermal Desorption/Gas Chromatography (ATD/GC)
  • D7829 - 13(2018) Guide for Sediment and Water Determination in Crude Oil
  • D7830/D7830M - 14 Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
  • D7831 - 20 Practice for Sampling of Tanks by Field Personnel
  • D7832/D7832M - 14 Guide for Performance Attributes of Waterproofing Membranes Applied to Below-Grade Walls / Vertical Surfaces (Enclosing Interior Spaces)
  • D7833 - 20 Test Method for Determination of Hydrocarbons and Non-Hydrocarbon Gases in Gaseous Mixtures by Gas Chromatography
  • D7834 - 13(2019) Test Method for Filling Material Shedding of Paint Brushes
  • D7835/D7835M - 19 Test Method for Determining the Solvent Resistance of an Organic Coating Using a Mechanical Rubbing Machine
  • D7836 - 13(2020) Test Methods for Measurement of Yield Stress of Paints, Inks and Related Liquid Materials
  • D7840 - 12(2017) Test Method for Foaming Tendencies of Non-Aqueous Engine Coolants in Glassware
  • D7841 - 13 Practice for Sustainable Laundry Best Management Practices
  • D7842/D7842M - 12(2016) Test Method for Holding Strength of Tack and Prong Fastener Attached Buttons
  • D7843 - 18 Test Method for Measurement of Lubricant Generated Insoluble Color Bodies in In-Service Turbine Oils using Membrane Patch Colorimetry
  • D7844 - 20 Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
  • D7845 - 20 Test Method for Determination of Chemical Species in Marine Fuel Oil by Multidimensional Gas Chromatography/Mass Spectrometry
  • D7846 - 16 Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Graphites
  • D7847 - 17 Guide for Interlaboratory Studies for Microbiological Test Methods
  • D7849 - 18a Classification for Nomenclature of Reference Materials of Committee D24
  • D7850 - 19 Specification for Biological Properties of Industry Reference Materials (IRM)
  • D7851 - 17 Guide for Design of Sustainable, Low-Slope Roofing Systems
  • D7852 - 13 Practice for Use of an Electrically Conductive Geotextile for Leak Location Surveys
  • D7853 - 13(2020) Test Method for Hydraulic Pullout Resistance of a Geomembrane with Locking Extensions Embedded in Concrete
  • D7854 - 18ce1 Test Method for Carbon Black-Void Volume at Mean Pressure
  • D7855/D7855M - 13(2017) Test Method for Determination of Mold Growth on Coated Building Products Designed for Interior Applications Using an Environmental Chamber and Indirect Inoculation
  • D7856 - 15a Specification for Color and Appearance Retention of Solid and Variegated Color Plastic Siding Products using CIELab Color Space
  • D7857 - 16 Test Method for Evaluating the Flexural Properties and Internal Bond Strength of Fire-Retarded Mat-Formed Wood Structural Composite Panels Exposed to Elevated Temperatures
  • D7858 - 13(2018) Test Method for Determination of Bisphenol A in Soil, Sludge, and Biosolids by Pressurized Fluid Extraction and Analyzed by Liquid Chromatography/Tandem Mass Spectrometry
  • D7859 - 19 Practice for Spraying, Sampling, Packaging, and Test Specimen Preparation of Spray Polyurethane Foam (SPF) Insulation for Testing of Emissions Using Environmental Chambers
  • D7860 - 14 Test Methods for Measurement of Torque Retention for Child Resistant and Non-Child Resistant Packages with Continuous Thread Closures Using Automated Torque Testing Equipment
  • D7861 - 14(2019) Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Diesel Fuel by Linear Variable Filter (LVF) Array Based Mid-Infrared Spectroscopy
  • D7862 - 19 Specification for Butanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel
  • D7863 - 17 Guide for Evaluation of Convective Heat Transfer Coefficient of Liquids
  • D7864/D7864M - 15 Test Method for Determining the Aperture Stability Modulus of Geogrids
  • D7865 - 13 Guide for Identification, Packaging, Handling, Storage and Deployment of Fabricated Geomembrane Panels
  • D7866 - 14a Specification for Radiation Attenuating Protective Gloves
  • D7867 - 13(2020) Test Methods for Measurement of the Rotational Viscosity of Paints, Inks and Related Liquid Materials as a Function of Temperature
  • D7868 - 13(2017) Practice for Determining the Dry Fall (Fog) Properties of Protective Coatings
  • D7869 - 17 Practice for Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings
  • D7870/D7870M - 20 Practice for Moisture Conditioning Compacted Asphalt Mixture Specimens by Using Hydrostatic Pore Pressure
  • D7871 - 19 Test Method for Analysis of Cyclohexane by Gas Chromatography (Effective Carbon Number)
  • D7872 - 13(2018) Test Method for Determining the Concentration of Pipeline Drag Reducer Additive in Aviation Turbine Fuels
  • D7873 - 20 Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120 °C Without the Inclusion of Water (Dry TOST Method)
  • D7874 - 13(2018) Guide for Applying Failure Mode and Effect Analysis (FMEA) to In-Service Lubricant Testing
  • D7875 - 20 Test Method for Determination of Butanol and Acetone Content of Butanol for Blending with Gasoline by Gas Chromatography
  • D7876 - 13(2018) Practice for Practice for Sample Decomposition Using Microwave Heating (With or Without Prior Ashing) for Atomic Spectroscopic Elemental Determination in Petroleum Products and Lubricants
  • D7877 - 14 Guide for Electronic Methods for Detecting and Locating Leaks in Waterproof Membranes
  • D7878/D7878M - 13e1 Tables for Body Measurements for Adult Female Misses Petite Figure Type, Size Range 00P – 20P
  • D7879 - 13(2018) Test Method for Determining Flax Fiber Widths Using Image Analysis
  • D7880/D7880M - 13 Test Method for Determining Flow Rate of Water and Suspended Solids Retention from a Closed Geosynthetic Bag
  • D7881 - 20 Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Reverse Voltage Mode
  • D7882 - 20 Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Normal Voltage Mode
  • D7883 - 20 Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Weak Anion Exchange High Performance Liquid Chromatography
  • D7884 - 20 Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Reverse Phase High Performance Liquid Chromatography
  • D7886 - 14(2019)e1 Practice for Asbestos Exposure Assessments for Repetitive Maintenance and Installation Tasks
  • D7887 - 20 Guide for Selection of Substitute, Non-hazardous, Liquid Filling Substances for Packagings Subjected to the United Nations Performance Tests
  • D7888 - 18 Practice for Evaluating Adhesive and the Effects of Plasticizer Found Within Polyvinyl Chloride-Backed Floor Coverings
  • D7889 - 13 Test Method for Field Determination of In-Service Fluid Properties Using IR Spectroscopy
  • D7891 - 15 Test Method for Shear Testing of Powders Using the Freeman Technology FT4 Powder Rheometer Shear Cell
  • D7892 - 15 Test Method for Determination of Total Organic Halides, Total Non-Methane Hydrocarbons, and Formaldehyde in Hydrogen Fuel by Gas Chromatography/Mass Spectrometry
  • D7893 - 13(2018) Guide for Corrosion Test Panel Preparation, Testing, and Rating of Coil-Coated Building Products
  • D7894/D7894M - 19 Test Method for Thermal Endurance of Coating Powders Used for Integral Bus Bar Insulation Systems
  • D7895/D7895M - 19 Test Method for Thermal Endurance of Coating Powders Used for Powder Coating Insulation Systems
  • D7896 - 19 Test Method for Thermal Conductivity, Thermal Diffusivity, and Volumetric Heat Capacity of Engine Coolants and Related Fluids by Transient Hot Wire Liquid Thermal Conductivity Method
  • D7897 - 18 Practice for Laboratory Soiling and Weathering of Roofing Materials to Simulate Effects of Natural Exposure on Solar Reflectance and Thermal Emittance
  • D7898 - 14(2020) Practice for Lubrication and Hydraulic Filter Debris Analysis (FDA) for Condition Monitoring of Machinery
  • D7899 - 19 Test Method for Measuring the Merit of Dispersancy of In-Service Engine Oils with Blotter Spot Method
  • D7900 - 18e1 Test Method for Determination of Light Hydrocarbons in Stabilized Crude Oils by Gas Chromatography
  • D7901 - 20 Specification for Dimethyl Ether for Fuel Purposes
  • D7902 - 20 Terminology for Radiochemical Analyses
  • D7903 - 14(2020) Practice for Determining the Capacity of Oxygen Removal Ion Exchange Cartridges
  • D7904 - 15 Test Method for Determination of Water Vapor (Moisture Concentration) in Natural Gas by Tunable Diode Laser Spectroscopy (TDLAS)
  • D7905/D7905M - 19e1 Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
  • D7906 - 14 Practice for Recovery of Asphalt from Solution Using Toluene and the Rotary Evaporator
  • D7907 - 14(2019) Test Methods for Determination of Bactericidal Efficacy on the Surface of Medical Examination Gloves
  • D7909 - 14 Guide for Placement of Blind Actual Leaks during Electrical Leak Location Surveys of Geomembranes
  • D7910 - 14 Practice for Collection of Fungal Material From Surfaces by Tape Lift
  • D7911 - 19 Guide for Using Reference Material to Characterize Measurement Bias Associated with Volatile Organic Compound Emission Chamber Test
  • D7912 - 14 Test Method for Resistance of Finish to Heat Aging (Finish Stability)
  • D7913/D7913M - 14(2020) Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing
  • D7914/D7914M - 14 Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
  • D7915 - 18 Practice for Application of Generalized Extreme Studentized Deviate (GESD) Technique to Simultaneously Identify Multiple Outliers in a Data Set
  • D7917 - 14(2018) Practice for Inductive Wear Debris Sensors in Gearbox and Drivetrain Applications
  • D7918 - 17a Test Method for Measurement of Flow Properties and Evaluation of Wear, Contaminants, and Oxidative Properties of Lubricating Grease by Die Extrusion Method and Preparation
  • D7919 - 14(2017) Guide for Filter Debris Analysis (FDA) Using Manual or Automated Processes
  • D7920 - 21 Test Method for Determination of Fuel Methanol (M99) and Methanol Fuel Blends (M10 to M99) by Gas Chromatography
  • D7922 - 14 Test Method for Determination of Glycol for In-Service Engine Oils by Gas Chromatography
  • D7923 - 19 Test Method for Water in Ethanol and Hydrocarbon Blends by Karl Fischer Titration
  • D7928 - 17 Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
  • D7929 - 20 Guide for Selection of Passive Techniques for Sampling Groundwater Monitoring Wells
  • D7931 - 18 Guide for Specifying Drainage Geocomposites
  • D7932 - 17 Specification for Printed, Pressure-Sensitive Adhesive Labels for Use in Extreme Distribution Environments
  • D7933 - 15 Test Method for Engine Coolant Stagnation in Flux-Brazed Aluminum Heat Exchangers
  • D7934/D7934M - 14 Test Method for Corrosion of Cast Aluminum Alloys in Non-Aqueous Engine Coolants Under Heat-Rejecting Conditions
  • D7935 - 20 Test Method for Corrosion Test for Non-Aqueous Engine Coolants in Glassware
  • D7936 - 20 Test Method for Flammability of Electrical Insulating Materials Intended for Wires or Cables When Burning in Horizontal Configuration
  • D7937 - 15 Test Method for In-situ Determination of Turbidity Above 1 Turbidity Unit (TU) in Surface Water
  • D7938 - 15 Practice for Sampling of C-14 in Gaseous Effluents
  • D7939 - 15 Test Method for Rapid Radiochemical Determination of Americium-241 in Water
  • D7940 - 14 Practice for Analysis of Liquefied Natural Gas (LNG) by Fiber-Coupled Raman Spectroscopy
  • D7941/D7941M - 14 Test Method for Hydrogen Purity Analysis Using a Continuous Wave Cavity Ring-Down Spectroscopy Analyzer
  • D7942 - 15 Specification for Thermoplastic Pavement Markings in Non Snow Plow Areas
  • D7944 - 15 Practice for Recovery of Emulsified Asphalt Residue Using a Vacuum Oven
  • D7945 - 21 Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
  • D7946 - 19 Test Method for Initial pH (i-pH)-Value of Petroleum Products
  • D7948 - 20 Test Method for Measurement of Respirable Crystalline Silica in Workplace Air by Infrared Spectrometry
  • D7949 - 14 Test Methods for Thermal Integrity Profiling of Concrete Deep Foundations
  • D7951 - 20 Specification for Disproportionation (TDP) Toluene
  • D7952 - 15 Test Method for Measuring Aspiration Potential of Aerosol Products
  • D7953 - 20 Practice for Electrical Leak Location on Exposed Geomembranes Using the Arc Testing Method
  • D7954/D7954M - 15a Practice for Moisture Surveying of Roofing and Waterproofing Systems Using Non-Destructive Electrical Impedance Scanners
  • D7956/D7956M - 16 Practice for Compressive Testing of Thin Damaged Laminates Using a Sandwich Long Beam Flexure Specimen
  • D7957/D7957M - 17 Specification for Solid Round Glass Fiber Reinforced Polymer Bars for Concrete Reinforcement
  • D7958/D7958M - 17 Test Method for Evaluation of Performance for FRP Composite Bonded to Concrete Substrate using Beam Test
  • D7959 - 19 Test Method for Chloride Content Determination of Aviation Turbine Fuels using Chloride Test Strip
  • D7960 - 18 Specification for Unleaded Aviation Gasoline Test Fuel Containing Non-hydrocarbon Components
  • D7961 - 17 Practice for Calibrating U-tube Density Cells over Large Ranges of Temperature and Pressure
  • D7962 - 17 Practice for Determination of Minimum Immersion Depth and Assessment of Temperature Sensor Measurement Drift
  • D7963 - 19e1 Test Method for Determination of Contamination Level of Fatty Acid Methyl Esters in Middle Distillate and Residual Fuels Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
  • D7964/D7964M - 19 Test Method for Determining Activity of Fluid Catalytic Cracking (FCC) Catalysts in a Fluidized Bed
  • D7966/D7966M - 16 Test Method for Resistance to Creep of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)
  • D7967 - 16 Test Method for Analysis of Chrome Content (as Cr2O3) in Wet Blue using Atomic Absorption
  • D7968 - 17a Test Method for Determination of Polyfluorinated Compounds in Soil by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS)
  • D7969 - 16 Specification for Gravity Convection and Forced Ventilation Ovens
  • D7971 - 20 Guide for Measuring Roundness of Glass Spheres Using a Flowing Stream Digital Image Analyzer
  • D7972 - 14(2020) Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature
  • D7973 - 19 Guide for Monitoring Failure Mode Progression in Plain Bearings
  • D7974 - 21 Test Method for Determination of Farnesane, Saturated Hydrocarbons, and Hexahydrofarnesol Content of Synthesized Iso-Paraffins (SIP) Fuel for Blending with Jet Fuel by Gas Chromatography
  • D7975 - 14 Test Method for Determination of Vapor Pressure of Crude Oil: VPCRx-F(Tm°C)(Manual Expansion Field Method)
  • D7976 - 14(2020) Specification for Purified Terephthalic Acid (PTA)
  • D7977 - 19 Test Methods for Polymer Content of AMS (α-Methylstyrene)
  • D7978 - 14(2019) Test Method for Determination of the Viable Aerobic Microbial Content of Fuels and Associated Water—Thixotropic Gel Culture Method\
  • D7979 - 20 Test Method for Determination of Per- and Polyfluoroalkyl Substances in Water, Sludge, Influent, Effluent, and Wastewater by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS)
  • D7980 - 15 Guide for Ion-Chromatographic Analysis of Anions in Grab Samples of Ultrapure Water (UPW) in the Semiconductor Industry
  • D7981 - 20 Practice for Compaction of Prismatic Asphalt Specimens by Means of the Shear Box Compactor
  • D7982 - 15 Practice for Testing of Factory Thermo-Fusion Seams for Fabricated Geomembrane Panels
  • D7983 - 17 Test Method for Shrinkage of Carpet Backing Fabrics
  • D7984 - 16 Test Method for Measurement of Thermal Effusivity of Fabrics Using a Modified Transient Plane Source (MTPS) Instrument
  • D7986 - 17a Practice for Preparing Specimens of Hydraulic Erosion Control Products for Index Property Testing
  • D7989 - 20 Practice for Demonstrating Equivalent In-Plane Lateral Seismic Performance to Wood-Frame Shear Walls Sheathed with Wood Structural Panels
  • D7990 - 15 Test Method for Using Reflectance Spectra to Produce an Index of Temperature Rise in Polymeric Siding
  • D7991 - 15 Test Method for Determining Aerobic Biodegradation of Plastics Buried in Sandy Marine Sediment under Controlled Laboratory Conditions
  • D7992/D7992M - 15 Practice for Elevated Temperature and Moisture Conditioning of Pultruded Fiber Reinforced Polymer (FRP) Composites Used in Structural Designs
  • D7993 - 15(2019) Guide for Analyzing Complex Phthalates
  • D7994 - 17 Test Method for Total Fluorine, Chlorine, and Sulfur in Liquid Petroleum Gas (LPG) by Oxidative Pyrohydrolytic Combustion Followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
  • D7995 - 19 Test Method for Total Water in Liquid Butane by Liquefied Gas Sampler and Coulometric Karl Fischer Titration
  • D7996 - 15 Test Method for Measuring Visible Spectrum of Asphaltenes in Heavy Fuel Oils and Crude Oils by Spectroscopy in a Microfluidic Platform
  • D7997 - 15 Practice for Polyurethane Raw Materials: Gel Tests for Polyurethane Non-Foam Formulations
  • D7998 - 19 Test Method for Measuring the Effect of Temperature on the Cohesive Strength Development of Adhesives using Lap Shear Bonds under Tensile Loading
  • D7999 - 15(2019) Classification for Rubber Products in Natural Gas Pipeline Applications
  • D8000 - 15(2020) Practice for Flow Conditioning of Natural Gas and Liquids[2]

D8001-D8378[edit]

  • D8001 - 16e1 Test Method for Determination of Total Nitrogen, Total Kjeldahl Nitrogen by Calculation, and Total Phosphorus in Water, Wastewater by Ion Chromatography
  • D8002 - 15e1 Test Method for Modified Fouling Index (MFI-0.45) of Water
  • D8003 - 15a Test Method for Determination of Light Hydrocarbons and Cut Point Intervals in Live Crude Oils and Condensates by Gas Chromatography
  • D8004 - 15 Test Method for Fuel Dilution of In-Service Lubricants Using Surface Acoustic Wave Sensing
  • D8005 - 18 Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
  • D8006 - 16 Guide for Sampling and Analysis of Residential and Commercial Water Supply Wells in Areas of Exploration and Production (E&P) Operations
  • D8007 - 15(2019) Test Method for Wale and Course Count of Weft Knitted Fabrics
  • D8008 - 20 Practice for Representative Field Sampling of Traffic Paints
  • D8009 - 15 Practice for Manual Piston Cylinder Sampling for Volatile Crude Oils, Condensates, and Liquid Petroleum Products
  • D8010 - 18 Test Method for Determination of Water Soluble Alkali Content in Coal
  • D8011 - 19 Specification for Natural Gasoline as a Blendstock in Ethanol Fuel Blends or as a Denaturant for Fuel Ethanol
  • D8012 - 18 Practice for Reclamation of Scrap and Waste Asphalt Shingles to Produce Reclaimed Asphalt Shingles (RAS) for Use in Transportation Applications
  • D8013 - 16(2021) Guide for Establishing a Recycle Program for Roof Coverings, Roofing Membrane, and Shingle Materials
  • D8014 - 17 Guide for Selection of Membranes Used in Vegetative Roofing Systems
  • D8015 - 15(2019) Test Method for Dimensional Changes of Elastomer and Rubber Materials Due to Exposure to Gaseous Hydrocarbon Environments
  • D8016 - 18e1 Test Method for Silica, Precipitated, Hydrated—Sears Number
  • D8018 - 15(2020) Test Method for Determination of (Tri-n-butyl)-n-tetradecylphosphonium chloride (TTPC) in Soil by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS)
  • D8019 - 15 Test Methods for Determining the Full Section Flexural Modulus and Bending Strength of Fiber Reinforced Polymer Crossarms Assembled with Center Mount Brackets
  • D8020 - 15(2020) Test Method for Freeze-Thaw Viscosity Stability of Water-Based Inks and Ink Vehicles
  • D8021 - 20 Guide for Blast Furnace and Steel Furnace Slag as Produced During the Manufacture of Iron and Steel
  • D8022 - 20 Test Method for Roll Stability of Lubricating Grease in Presence of Water (Wet Roll Stability Test)
  • D8023 - 17 Specification for Round Wood Dowels (Pegs) for Use in Wood Construction
  • D8024 - 16 Test Method for Determination of (Tri-n-butyl)-n-tetradecylphosphonium chloride (TTPC) in Water by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS)
  • D8025 - 16 Test Method for Determination of Select Pesticides in Water by Multiple Reaction Monitoring Liquid Chromatography Tandem Mass Spectrometry
  • D8026 - 16 Practice for Determination of Tc-99 in Water by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
  • D8027 - 17 Practice for Concentration of Select Radionuclides Using MnO2 for Measurement Purposes
  • D8028 - 17 Test Method for Measurement of Dissolved Gases Methane, Ethane, Ethylene, and Propane by Static Headspace Sampling and Flame Ionization Detection (GC/FID)
  • D8029 - 18 Specification for Biodegradable, Low Aquatic Toxicity Hydraulic Fluids
  • D8030/D8030M - 19 Practice for Sample Preparation for GCCM
  • D8031 - 16 Test Method for Acid Number of Terephthalic Acid (TA) by Automatic Potentiometric Titration
  • D8032 - 20 Test Method for Acid Number of Terephthalic Acid by Color-Indicator Titration
  • D8033 - 16 Classification System for Poly(Ether Ether Ketone) (PEEK) Molding and Extrusion Materials
  • D8034/D8034M - 17 Test Method for Simulated Service Corrosion Testing of Non-Aqueous Engine Coolants
  • D8036 - 16 Test Method for Polyurethane Raw Materials: Determination of Dimer Ratio in Pure MDI
  • D8037/D8037M - 16 Practice for Direct Push Hydraulic Logging for Profiling Variations of Permeability in Soils
  • D8038 - 16 Practice for Reclamation of Recycled Aggregate Base (RAB) Material
  • D8039 - 16 Specification for Heat Transfer Fluids (HTF) for Heating and Air Conditioning (HVAC) Systems
  • D8040 - 18 Test Method for Corrosion Test for Heat Transfer Fluids in Glassware
  • D8041/D8041M - 16 Test Method for Whole Boot Breathability (MVTR)
  • D8042 - 18 Test Method for Shrinkage Temperature of Wet Blue and Wet White
  • D8043 - 20 Guide for Carbon Black—Shelf Life
  • D8044 - 16 Test Method for Evaluation of Asphalt Mixture Cracking Resistance using the Semi-Circular Bend Test (SCB) at Intermediate Temperatures
  • D8045 - 17e1 Test Method for Acid Number of Crude Oils and Petroleum Products by Catalytic Thermometric Titration
  • D8046 - 16a Guide for Pumpability of Heat Transfer Fluids
  • D8047 - 19 Test Method for Evaluation of Engine Oil Aeration Resistance in a Caterpillar C13 Direct-Injected Turbocharged Automotive Diesel Engine
  • D8048 - 21 Test Method for Evaluation of Diesel Engine Oils in T-13 Diesel Engine
  • D8049 - 19a Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Analyzer
  • D8051/D8051M - 16 Specification for Wax-Modified Asphalt Used in Roofing
  • D8052/D8052M - 17 Test Method for Quantification of Air Leakage in Low-Sloped Membrane Roof Assemblies
  • D8053 - 18 Guide for Data Management and Reporting Associated with Oil and Gas Development Involving Hydraulic Fracturing
  • D8054/D8054M - 16 Test Methods for Tensile Testing of Para-Aramid Flat Yarns
  • D8055 - 17 Guide for Selecting an Appropriate Electronic Thermometer for Replacing Mercury Thermometers in D04 Road and Paving Standards
  • D8056 - 18 Guide for Elemental Analysis of Crude Oil
  • D8057 - 17 Specification for Inlet Filters with a Rigid Frame
  • D8058 - 19 Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
  • D8059 - 19 Test Method for Rubber Compounds—Measurement of Unvulcanized Dynamic Strain Softening (Payne Effect) Using Sealed Cavity Rotorless Shear Rheometers
  • D8060 - 17 Specification for 2-Bromo-3,3,3-Trifluoro-1-Propene (CF3CBr=CH2)
  • D8061 - 16 Practice for Handling, Transportation, and Storage of 2-Bromo-3,3,3-Trifluoro-1-Propene (CF3CBr=CH2)
  • D8062 - 19 Specification for Purified Terephthalic Acid (PTA) with Low p-Toluic Acid
  • D8063 - 18 Test Method for Water in Purified Terephthalic Acid (PTA) by Volumetric Karl Fischer Titration
  • D8064 - 16 Test Method for Elemental Analysis of Soil and Solid Waste by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams
  • D8065/D8065M - 16 Classification System and Basis for Specification for Specifying Plastic Films
  • D8066/D8066M - 17 Practice Unnotched Compression Testing of Polymer Matrix Composite Laminates
  • D8067/D8067M - 17 Test Method for In-Plane Shear Properties of Sandwich Panels Using a Picture Frame Fixture
  • D8068 - 19 Practice for Collection of Culturable Airborne Fungi or Bacteria on Agar Plates by Inertial Impaction Systems
  • D8069 - 17a Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending
  • D8070 - 20 Test Method for Screening of Fuels and Fuel Associated Aqueous Specimens for Microbial Contamination by Lateral Flow Immunoassay
  • D8071 - 20 Test Method for Determination of Hydrocarbon Group Types and Select Hydrocarbon and Oxygenate Compounds in Automotive Spark-Ignition Engine Fuel Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)
  • D8072 - 17 Classification for Reporting Solids and Insoluble Water Contamination of Hydrocarbon-Based Petroleum Products When Analyzed by Imaging Instrumentation
  • D8073 - 16 Test Method for Determination of Water Separation Characteristics of Aviation Turbine Fuel by Small Scale Water Separation Instrument
  • D8074 - 19 Test Method for Evaluation of Diesel Engine Oils in DD13 Diesel Engine
  • D8075 - 16 Guide for Categorization of Microstructural and Microtextural Features Observed in Optical Micrographs of Graphite
  • D8076 - 21 Specification for 100 Research Octane Number Test Fuel for Automotive Spark-Ignition Engines
  • D8077/D8077M - 16 Tables for Body Measurements for Mature Big Men Type, Size Range 46–64
  • D8078 - 18e1 Test Method for Ash Content of Asphalt and Emulsified Asphalt Residues
  • D8079 - 16 Practice for Preparation of Compacted Slab Asphalt Mix Samples Using a Segmented Rolling Compactor
  • D8081 - 17 Guide for Theory and Principles for Obtaining Reliable and Accurate Bulk Solids Flow Data Using a Direct Shear Cell
  • D8082 - 18 Specification for Elemental Impurity Limits in Erosion Control Products used for Land Application
  • D8083 - 16 Test Method for Total Nitrogen, and Total Kjeldahl Nitrogen (TKN) by Calculation, in Water by High Temperature Catalytic Combustion and Chemiluminescence Detection
  • D8084 - 17 Test Method for Photoelectrochemical Oxygen Demand of Freshwater Sources for Drinking Water Treatment Plants and Treated Drinking Water
  • D8085 - 17 Specification for Non-Aqueous Engine Coolant for Automobile and Light-Duty Service
  • D8087 - 18 Test Method for Color of Maleic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale) Using Tristimulus Colorimetry
  • D8088 - 16 Practice for Determination of the Six Major Rare Earth Elements in Fluid Catalytic Cracking Catalysts, Zeolites, Additives, and Related Materials by Inductively Coupled Plasma Optical Emission Spectroscopy
  • D8089 - 17 Practice for Accelerated Heat Aging for Floor Covering Adhesives
  • D8090 - 17 Test Method for Particle Size Distribution and Shape Analysis of Paints and Pigments Using Dynamic Imaging Methods
  • D8091 - 16 Guide for Impregnation of Graphite with Molten Salt
  • D8092 - 17 Test Method for Field Determination of Kinematic Viscosity Using a Microchannel Viscometer
  • D8093 - 19 Guide for Nondestructive Evaluation of Nuclear Grade Graphite
  • D8094 - 20 Test Method for Determination of Water Content of Liquefied Petroleum Gases (LPG) Using an Online Electronic Moisture Analyzer
  • D8097 - 17e1 Test Method for Determination of Bulk Density for Specific Size Fractions of Calcined Petroleum Coke Using a Transaxial Pressure Pycnometer
  • D8098 - 17 Test Method for Permanent Gases in C2 and C3 Hydrocarbon Products by Gas Chromatography and Pulse Discharge Helium Ionization Detector
  • D8099/D8099M - 17 Specification for Asphalt Emulsion Pavement Sealer (Mineral Colloid or Chemically Stabilized Type)
  • D8101/D8101M - 18 Test Method for Measuring the Penetration Resistance of Composite Materials to Impact by a Blunt Projectile
  • D8102 - 17 Practice for Manufacturing Quality Control of Geotextiles
  • D8104 - 17 Guide for Determining Coating Qualification Test Data Applicability
  • D8105 - 18 Guide for Use and Application of Geosynthetic Reinforcement Reduction Factor Test Results
  • D8106 - 17 Test Methods for Determining the Oil Sorption Capacity of Organophilic Clay
  • D8107 - 18 Practice for Determining Sediment Pond Skimmer Flow Rate
  • D8108 - 20 Test Method for Determination of Particulate Matter Mass from Light Duty Mobile Sources (Gravimetric Method)
  • D8109 - 17 Guide for Waterproofing Repair of Concrete by Chemical Grout Crack Injection
  • D8110 - 17 Test Method for Elemental Analysis of Distillate Products by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
  • D8111 - 20b Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIH, Spark-Ignition Engine
  • D8112 - 17 Guide for Obtaining In-Service Samples of Turbine Operation Related Lubricating Fluid
  • D8114 - 21 Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIE Spark Ignition
  • D8115 - 17 Test Method for Rubber Property—Abrasion Resistance (Multi-Directional Platform Abrader)
  • D8117 - 17 Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by Differential Scanning Calorimetry
  • D8120 - 17 Test Method for Ferrous Debris Quantification
  • D8121/D8121M - 19 Test Method for Approximating the Shear Strength of Cohesive Soils by the Handheld Vane Shear Device
  • D8125 - 18 Specification for Re-Refined Engine Oil Bottoms (REOB)/Vacuum Tower Asphalt Extender (VTAE)
  • D8126 - 17 Test Method for Efficient Basicity Determination by Potentiometric Hydrochloric Acid Titration
  • D8127 - 17e1 Test Method for Coupled Particulate and Elemental Analysis using X-ray Fluorescence (XRF) for In-Service Lubricants
  • D8128 - 17 Guide for Monitoring Failure Mode Progression in Industrial Applications with Rolling Element Ball Type Bearings
  • D8130 - 17 Test Method for Determination of Metals in Purified Terephthalic Acid (PTA) by Inductively Coupled Plasma Atomic Emission Spectrometric Method
  • D8131/D8131M - 17e1 Practice for Tensile Properties of Tapered and Stepped Joints of Polymer Matrix Composite Laminates
  • D8132/D8132M - 17 Test Method for Determination of Prepreg Impregnation by Permeability Measurement
  • D8133 - 20 Test Method for Determination of Low Level Phthalates in Poly(Vinyl Chloride) Plastics by Solvent Extraction—Gas Chromatography/Mass Spectrometry
  • D8134 - 18 Guide for Conducting Internal Hydrostatic Pressure Tests on United Nations (UN) IBC Design Types
  • D8135 - 17 Guide for Selection of Substitute, Non-hazardous, Particulate Solid Filling Substances for Packagings Subjected to the United Nations Performance Tests
  • D8136 - 17 Test Method for Determining Plastic Film Thickness and Thickness Variability Using a Non-Contact Capacitance Thickness Gauge
  • D8137 - 18 Practice for Accelerated Aging of Leather
  • D8138 - 18 Specification for Preformed Silicone Joint Sealing System for Bridges
  • D8139 - 17 Specification for Semi-Rigid, Closed-Cell Polypropylene Foam, Preformed Expansion Joint Fillers for Concrete Paving and Structural Construction
  • D8140 - 18 Guide for the Use of Foundry Sand in Asphalt Mixtures
  • D8141 - 17 Guide for Selecting Volatile Organic Compounds (VOCs) and Semi-Volatile Organic Compounds (SVOCs) Emission Testing Methods to Determine Emission Parameters for Modeling of Indoor Environments
  • D8142 - 17e1 Test Method for Determining Chemical Emissions from Spray Polyurethane Foam (SPF) Insulation using Micro-Scale Environmental Test Chambers
  • D8143 - 17 Test Method for Determination of the EU-8 List of PAH Compounds in Carbon Black
  • D8144 - 18e1 Test Method for Separation and Determination of Aromatics, Nonaromatics, and FAME Fractions in Middle Distillates by Solid-Phase Extraction and Gas Chromatography
  • D8145 - 18 Practice for Sampling of Green Petroleum Coke
  • D8146 - 18 Guide for Evaluating Test Method Capability and Fitness for Use
  • D8147 - 17 Specification for Special-Purpose Test Fuels for Aviation Compression-Ignition Engines
  • D8148 - 17 Test Method for Spectroscopic Determination of Haze in Fuels
  • D8149 - 20 Practice for Optimization, Calibration, and Validation of Ion Chromatographic Determination of Heteroatoms and Anions in Petroleum Products and Lubricants
  • D8150 - 17 Test Method for Determination of Organic Chloride Content in Crude Oil by Distillation Followed by Detection Using Combustion Ion Chromatography
  • D8151 - 19e1 Practice for Obtaining Rainfall Runoff from Unvegetated Rolled and Hydraulic Erosion Control Products (RECPs and HECPs) for Acute Ecotoxicity Testing
  • D8152 - 18 Practice for Measuring Field Infiltration Rate and Calculating Field Hydraulic Conductivity Using the Modified Philip Dunne Infiltrometer Test
  • D8154 - 17e1 Test Methods for 1H-NMR Determination of Ketone-Ethylene-Ester and Polyvinyl Chloride Contents in KEE-PVC Roofing Fabrics
  • D8155 - 17 Practice for Shake Extraction of Solid Mining and Metallurgical Processing Waste with Water
  • D8156 - 18 Classification System for and Basis of Specifications for Thermoplastic Elastomer Copolyester Molding and Extrusion Materials (TPC)
  • D8157 - 19 Guide for Qualification Testing of Coatings Used in Coating Service Level I in Nuclear Power Plants
  • D8159 - 19 Test Method for Automated Extraction of Asphalt Binder from Asphalt Mixtures
  • D8160 - 20 Test Method for Un-notched Cantilever Beam Impact Resistance (Izod Impact) Testing of Thermoplastic Pavement Marking Materials
  • D8161 - 17 Test Method for Impact Resistance of Thermoplastic Pavement Marking Materials over a Highway Substrate by Means of a Striker Impacted by a Falling Weight
  • D8162 - 20a Test Method for Determination of the Apparent Viscosity of Thermoplastic Pavement Marking Materials using a Rotational Viscometer with Temperature Control Heating Unit
  • D8163 - 18 Test Method for Determination of Strength of Colorants and Bases for Architectural, Marine, Maintenance, Commercial, and Industrial Coatings
  • D8164 - 19 Guide for Digital Contact Thermometers for Petroleum Products, Liquid Fuels, and Lubricant Testing
  • D8165 - 20a Test Method for Evaluation of Load-Carrying Capacity of Lubricants Used in Hypoid Final-Drive Axles Operated under Low-Speed and High-Torque Conditions
  • D8166 - 17 Test Method for Sizing and Counting Particulates in Light and Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Automatic Particle Counters
  • D8167/D8167M - 18a Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
  • D8169/D8169M - 18 Test Methods for Deep Foundations Under Bi-Directional Static Axial Compressive Load
  • D8170 - 20 Guide for Using Disposable Handheld Soil Core Samplers for the Collection and Storage of Soil for Volatile Organic Analysis
  • D8171 - 18 Test Methods for Density Determination of Flax Fiber
  • D8172 - 18 Test Method for Shear and Peel Strength of Solvent-Welded Seams with Nonreinforced Geomembranes
  • D8173 - 18 Guide for Site Preparation, Layout, Installation, and Hydration of Geosynthetic Cementitious Composite Mats
  • D8174 - 18 Test Method for Finite Flash Point Determination of Liquid Wastes by Small-Scale Closed Cup Tester
  • D8175 - 18 Test Method for Finite Flash Point Determination of Liquid Wastes by Pensky-Martens Closed Cup Tester
  • D8176 - 18 Test Method for Mechanically Tapped Density of Activated Carbon (Powdered and Fine Mesh)
  • D8178 - 20a Terminology Relating to Recovered Carbon Black (rCB)
  • D8179 - 18 Guide for Characterizing Detergents for the Cleaning of Clinically-used Medical Devices
  • D8181 - 19 Specification for Microemulsion Blendstock for Preparing Microemulsion Test Fuel Oils
  • D8182 - 18 Test Method for Alloy Classification of Wear Debris using Laser-Induced Breakdown Spectroscopy (LIBS)
  • D8183 - 18 Test Method for Determination of Indicated Cetane Number (ICN) of Diesel Fuel Oils using a Constant Volume Combustion Chamber—Reference Fuels Calibration Method
  • D8184 - 18e1 Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids Using a Particle Quantifier Instrument
  • D8185 - 18 Guide for In-Service Lubricant Viscosity Measurement
  • D8186 - 18 Test Method for Measurement of Impurities in Graphite by Electrothermal Vaporization Inductively Coupled Plasma Optical Emission Spectrometry (ETV-ICP OES)
  • D8187 - 18 Guide for Interpretation of Standard Humidity Cell Test Results
  • D8188 - 18 Test Method for Determination of Density and Relative Density of Asphalt, Semi-Solid Bituminous Materials, and Soft-Tar Pitch by Use of a Digital Density Meter (U-Tube)
  • D8189 - 19 Test Method for Tackiness of Asphalt Binders and Emulsified Asphalt Residue Using the Dynamic Shear Rheometer (DSR)
  • D8193 - 18 Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbon (TPH) in Water and Wastewater with Solvent Extraction Using Non-Dispersive Mid-IR Transmission Spectroscopy
  • D8194 - 18e1 Practice for Evaluation of Suitability of 37 mm Filter Monitors and 47 mm Filters Used to Determine Particulate Contaminant in Aviation Turbine Fuels
  • D8195 - 18 Classification System and Basis for Specification for Polyethylene Terephthalate Film and Sheeting
  • D8196 - 20 Practice for Determination of Water Activity (aw) in Cannabis Flower
  • D8197 - 18 Specification for Maintaining Acceptable Water Activity (aw) Range (0.55 to 0.65) for Dry Cannabis Flower
  • D8198 - 18 Specification for Hydraulically Applied 100 % Wood Fiber Mulches
  • D8199 - 20 Test Method for Determining the Specific Strength of Hydraulically Applied Fiber Matrix Products for Erosion Control
  • D8202 - 18 Specification for Hydraulically Applied 100% Wheat Straw Fiber Mulches
  • D8203 - 18 Test Method for Determination of the Horizontal Water Flow Rate of a Geosynthetic Screening Material, Product, or Device
  • D8204 - 18 Practice for Burial and Retrieval of Samples in a Test Pad to Evaluate Installation Effects on Geosynthetic Clay Liners
  • D8205 - 20 Guide for Video Surveillance System
  • D8206 - 18 Test Method for Oxidation Stability of Lubricating Greases—Rapid Small-Scale Oxidation Test (RSSOT)
  • D8207 - 18 Test Method for Determination of Metals in Purified Terephthalic Acid (PAT) by Atomic Absorption (AA) Spectrometry
  • D8208 - 19 Practice for Collection of Non-Fibrous Nanoparticles Using a Nanoparticle Respiratory Deposition (NRD) Sampler
  • D8210 - 20 Test Method for Automatic Determination of Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants Using a Rotational Viscometer
  • D8211 - 18 Test Method for Hot Surface Ignition Temperature of Gases on Flat Surface
  • D8213 - 18 Test Method for Determination of Boron in Coal
  • D8214 - 18 Test Method for Forms of Sulfur in Coal by Inductively Coupled Plasma Atomic Emission Spectrometry
  • D8215 - 20 Practice for Statistical Modeling of Uncertainty in Assessment of In-place Coal Resources
  • D8217 - 20 Guide for Access Control System
  • D8218 - 20 Guide for Intrusion Detection System (IDS)
  • D8219 - 19 Guide for Cleaning and Disinfection at a Cannabis Cultivation Center
  • D8220 - 20 Guide for Conducting Recall/Removal Procedures for Products in the Cannabis Industry
  • D8221 - 18ae1 Practice for Determining the Calculated Methane Number (MNC) of Gaseous Fuels Used in Internal Combustion Engines
  • D8223 - 19 Practice for Evaluation of Fire-Retardant Treated Laminated Veneer Lumber
  • D8225 - 19 Test Method for Determination of Cracking Tolerance Index of Asphalt Mixture Using the Indirect Tensile Cracking Test at Intermediate Temperature
  • D8226 - 21 Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIF Spark Ignition Engine
  • D8227 - 20 Test Method for Determining the Coefficient of Friction of Synchronizer Lubricated by Mechanical Transmission Fluids (MTF) Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
  • D8229 - 19 Guide for Corrective Action and Preventive Action (CAPA) for the Cannabis Industry
  • D8230 - 19 Test Method for Measurement of Volatile Silicon-Containing Compounds in a Gaseous Fuel Sample Using Gas Chromatography with Spectroscopic Detection
  • D8231 - 19 Practice for the Use of a Low Voltage Electronic Scanning System for Detecting and Locating Breaches in Roofing and Waterproofing Membranes
  • D8232 - 18 Test Procedures for Measuring the Inclination of Deep Foundations
  • D8233 - 19 Guide for Packaging and Labeling of Consumer Resin Cannabis Products for Sale to Adult Consumers, Legally Authorized Medical Users, and Caregivers in a Business-to-Consumer Retail Environment (Retailers)
  • D8234 - 19 Test Method for Anions in High Ionic Water by Ion Chromatography using Tandem Suppressed Conductivity and UV Detection
  • D8235 - 19 Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
  • D8236 - 18 Practice for Preparing an Equilibrium Liquid/Vapor Sample of Live Crude Oil, Condensates, or Liquid Petroleum Products Using a Manual Piston Cylinder for Subsequent Liquid Analysis or Gas Analysis
  • D8237 - 18 Test Method for Determining Fatigue Failure of Asphalt-Aggregate Mixtures With the Four-Point Beam Fatigue Device
  • D8238 - 18 Test Method for Immunological Assay to Quantify Extractable Guayule Natural Rubber (GNR) Proteins
  • D8239 - 18 Specification for Performance-Graded Asphalt Binder Using the Multiple Stress Creep and Recovery (MSCR) Test
  • D8241/D8241M - 19 Tables of Body Measurements for Young Men Type, Size Range 32 – 48
  • D8243 - 19 Test Method for Determination of APS Reductase to Estimate Sulfate Reducing Bacterial Bioburdens in Water – Enzyme-Linked Immunosorbent Assay Method
  • D8244 - 20 Guide for Analytical Laboratory Operations Supporting the Cannabis Industry
  • D8245 - 19 Guide for Disposal of Resin-Containing Cannabis Raw Materials and Downstream Products
  • D8247 - 19 Test Method for Determination of Total Fluorine and Total Chlorine in Coal by Oxidative Pyrohydrolytic Combustion Followed by Ion Chromatography Detection
  • D8248 - 20 Terminology for Smart Textiles
  • D8249 - 19 Practice for Use of Rotary Kiln Produced Porous Ceramic as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes
  • D8250 - 19 Practice for Applying a Hazard Analysis Critical Control Points (HACCP) System for Cannabis Consumable Products
  • D8252 - 19e1 Test Method for Vanadium and Nickel in Crude and Residual Oil by X-ray Spectrometry
  • D8253 - 21 Test Method for Determination of the Asphaltene Solvency Properties of Bitumen, Crude Oil, Condensate and/or Related Products for the Purpose of Calculating Stability, Compatibility for Blending, Fouling, and Processibility (Manual Microscopy Method)
  • D8254 - 19 Test Method for Flash and Fire Points of Asphalt by Cleveland Open Cup Tester
  • D8255 - 19 Guide for Work of Fracture Measurements on Small Nuclear Graphite Specimens
  • D8256 - 20 Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in the Sequence VH Spark-Ignition Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
  • D8257/D8257M - 20 Specification for Mechanically Attached Polymeric Roof Underlayment Used in Steep Slope Roofing
  • D8260 - 20 Specification for Hot-Applied Asphalt Aggregate-Filled Mastic
  • D8265 - 20 Practices for Electrical Methods for Mapping Leaks in Installed Geomembranes
  • D8266 - 19 Test Method for Analysis of Bisphenol A (4,4`-Isopropylidenediphenol) by High Performance Liquid Chromatography
  • D8267 - 19a Test Method for Determination of Total Aromatic, Monoaromatic and Diaromatic Content of Aviation Turbine Fuels Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)
  • D8268 - 19 Practice for Rubber Compounding Materials—Evaluation of Recycled Vulcanizate Particulate Rubber
  • D8270 - 20 Terminology Relating to Cannabis
  • D8271 - 19 Test Method for the Direct Measurement of Surface Profile of Prepared Concrete
  • D8272 - 19 Guide for Development and Optimization of D19 Chemical Analysis Methods Intended for EPA Compliance Reporting
  • D8273 - 20 Practice for Determination of Total and Available Cyanide in Solid Waste and Soil after Alkaline Extraction
  • D8274 - 20a Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil by Portable Rapid Mid-Infrared Analyzer
  • D8275 - 21 Specification for Gasoline-like Test Fuel for Compression-Ignition Engines
  • D8276 - 19 Test Method for Hydrocarbon Types in Middle Distillates, including Biodiesel Blends by Gas Chromatography/Mass Spectrometry
  • D8277 - 20 Test Method for Wet Filterability of Lubricants and Hydraulic Fluids by Mass Flow Technique
  • D8278 - 20 Specification for Digital Contact Thermometers for Test Methods Measuring Flow Properties of Fuels and Lubricants
  • D8279 - 21 Test Method for Determination of Timing-Chain Wear in a Turbocharged, Direct-Injection, Spark-Ignition, Four-Cylinder Engine
  • D8280 - 20a Test Method for Determination of the Blooming of Brominated Flame Retardants onto the Surface of Plastic Materials by Ion Chromatography
  • D8282 - 19 Practice for Laboratory Test Method Validation and Method Development
  • D8283 - 19 Practice for Cleaning and Certification of Specially Prepared Canisters
  • D8284 - 19 Test Method for Determination of the Total Alkalinity in Sulfated, Sulfonated Oils and Fatliquors
  • D8285/D8285M - 19 Practice for Compressive Properties of Tapered and Stepped Joints of Polymer Matrix Composite Laminates by Sandwich Construction Long Beam Flexure
  • D8286 - 19 Guide for Processing Cannabis Product Complaints
  • D8288 - 19 Test Method for Comparison of Metalworking Fluids Using a Tapping Torque Test Machine
  • D8289 - 20 Test Method for Tensile Strength Estimate by Disc Compression of Manufactured Graphite
  • D8290 - 20 Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Aviation Turbine Fuel using Mid-Infrared Laser Spectroscopy
  • D8291 - 20a Test Method for Evaluation of Performance of Automotive Engine Oils in the Mitigation of Low-Speed, Preignition in the Sequence IX Gasoline Turbocharged Direct-Injection, Spark-Ignition Engine
  • D8292 - 20 Test Method for Permanent Deformation Behavior and Rutting Resistance of Compacted Asphalt Mix in the Modified Loaded Wheel Tracker Test Utilizing Controlled Confining Pressure
  • D8293 - 19 Guide for Evaluating and Expressing the Uncertainty of Radiochemical Measurements
  • D8295 - 19 Test Method for Determination of Shear Wave Velocity and Initial Shear Modulus in Soil Specimens using Bender Elements
  • D8296 - 19 Test Method for Consolidated Undrained Cyclic Direct Simple Shear Test under Constant Volume with Load Control or Displacement Control
  • D8297/D8297M - 20 Test Method for Determination of Erosion Control Products (ECP) Performance in Protecting Slopes from Sequential Rainfall-Induced Erosion Using a Tilted Bed Slope
  • D8298/D8298M - 20 Test Method for Determination of Erosion Control Products (ECP) Performance in Protecting Slopes from Continuous Rainfall-Induced Erosion Using a Tilted Bed Slope
  • D8299 - 19 Guide for Using Metal Ratios in Soils to Distinguish Between Anthropogenic and Natural Beryllium
  • D8300 - 19 Test Method for Silica, Precipitated, Hydrated—Electrical Conductivity
  • D8302 - 20 Test Method for Determination of Cycloparaffin Content in Saturated ATJ-SPK Jet Fuel Gas Chromatography
  • D8303 - 20 Test Method for Determining Thermal Cracking Properties of Asphalt Mixtures Through Measurement of Thermally Induced Stress and Strain
  • D8304 - 19 Test Method for Determination of Compounded Forms of Iron in In-service Fluids
  • D8305 - 19 Test Method for The Determination of Total Aromatic Hydrocarbons and Total Polynuclear Aromatic Hydrocarbons in Aviation Turbine Fuels and other Kerosene Range Fuels by Supercritical Fluid Chromatography
  • D8308 - 20 Practice for Cannabis/Hemp Operation Compliance Audits
  • D8310 - 20 Test Method for Analysis of Target Phenols (TPs) in Soil by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS)
  • D8311 - 20 Test Method for Impurities in Monoethylene Glycol by Gas Chromatography with Normalization
  • D8314 - 20 Guide for Performance Testing of Applied Stretch Films and Stretch Wrapping
  • D8315 - 20 Test Method for Determination of Wear Metals and Contamination Elements in Used Industrial Oils by Sweeping Flat Electrode Atomic Emission Spectrometry
  • D8316 - 20a Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils with the Roller-Disk Geometry Using SRV Test Machine
  • D8318 - 20 Specification for Low-Density Poly (Vinylidene Fluoride) Based Material Intended for Use in Wire and Cable Jacketing
  • D8321 - 20 Practice for Development and Validation of Multivariate Analyses for Use in Predicting Properties of Petroleum Products, Liquid Fuels, and Lubricants based on Spectroscopic Measurements
  • D8322 - 20 Test Method for Determination of Elements in Residual Fuels and Crude Oils by Microwave Plasma Atomic Emission Spectroscopy (MP-AES)
  • D8323 - 20 Guide for Management of In-Service Phosphate Ester-based Fluids for Steam Turbine Electro-Hydraulic Control (EHC) Systems
  • D8325 - 20 Guide for Evaluation of Nuclear Graphite Surface Area and Porosity by Gas Adsorption Measurements
  • D8326 - 21 Practice for Measurement of the Kinetic Energy of Simulated Rainfall
  • D8329 - 20 Test Method for Determination of Water/Cementitious Materials Ratio for Geosynthetic Cementitious Composite Mats (GCCMs) and Measurement of the Compression Strength of the Cementitious Material Contained Within
  • D8330 - 20 Specification for Artists’ Pastels
  • D8331/D8331M - 20 Test Method for Measurement of Film Thickness of Thin-Film Coatings by Non-Destructive Means Using Ruggedized Optical Interference
  • D8332 - 20 Practice for Collection of Water Samples with High, Medium, or Low Suspended Solids for Identification and Quantification of Microplastic Particles and Fibers
  • D8333 - 20 Practice for Preparation of Water Samples with High, Medium, or Low Suspended Solids for Identification and Quantification of Microplastic Particles and Fibers Using Raman Spectroscopy, IR Spectroscopy, or Pyrolysis-GC/MS
  • D8334/D8334M - 20 Practice for Sampling of Cannabis/Hemp Post-Harvest Batches for Laboratory Analyses
  • D8335 - 20 Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials
  • D8339 - 20 Test Method for The Analysis of Flue Gas Desulfurization Solids by Macro Thermogravimetric Analysis
  • D8340 - 20a Practice for Performance-Based Qualification of Spectroscopic Analyzer Systems
  • D8344 - 20 Practice for Ammonium Bifluoride and Nitric Acid Digestion of Airborne Dust and Dust-Wipe Samples for the Determination of Metals and Metalloids
  • D8350 - 20 Test Method for Evaluation of Automotive Engine Oils in the Sequence IVB Spark-Ignition Engine
  • D8352 - 20 Test Method for Determination of Relative Crystallinity of Zeolite Beta by X-Ray Diffraction
  • D8353 - 20 Guide for Determination of Individual Particle Strength of Low Surface Area Catalysts and Catalyst Carriers by Drop Test onto a Steel Plate
  • D8354 - 20 Test Method for Flammability of Electrical Insulating Materials Used for Sleeving or Tubing
  • D8355 - 20 Test Methods for Flammability of Electrical Insulating Materials Used for Sleeving or Tubing
  • D8356 - 20 Test Method for Sonic Velocity in Manufactured Carbons and Graphite Materials for use in Obtaining Approximate Elastic Constants: Young’s Modulus, Shear Modulus, and Poisson’s Ratio
  • D8359 - 20 Test Method for Determining the In Situ Rock Deformation Modulus and Other Associated Rock Properties Using a Flexible Volumetric Dilatometer
  • D8361 - 20 Test Method for Total Organic Carbon in Water by Two Stage Wet Chemical Catalyzed Hydroxyl Radical Oxidation with Infra-Red Detection of Resulting Carbon Dioxide
  • D8362 - 20 Test Method for Rubber—Determination of the Degree of Silanization by Dynamic Strain Softening
  • D8363 - 20 Test Method for Rubber—Stress Relaxation in Tension Under Non-Isothermal Conditions
  • D8365 - 20 Test Method for Corrosion of Metal Produced by Contact with Leather
  • D8371 - 20 Test Method for Trace Metal Content Analysis in Carbon Black
  • D8378/D8378M - 21 Test Method for Potential Expansion of Steel Slag from Hydration Reactions by Autoclav[2]

See also[edit]

References[edit]

  1. "ASTM standard D series".
  2. 2.0 2.1 2.2 2.3 2.4 2.5 "ASTM International - Standards Search: D". www.astm.org. Retrieved 2021-02-05.

External links[edit]


This article "List of ASTM International standards (D)" is from Wikipedia. The list of its authors can be seen in its historical and/or the page Edithistory:List of ASTM International standards (D). Articles copied from Draft Namespace on Wikipedia could be seen on the Draft Namespace of Wikipedia and not main one.