SCSI CDB
In SCSI standards for transferring data between computers and peripheral devices, often computer storage, commands are sent in a Command Descriptor Block (CDB).
Each CDB can be a total of 6, 10, 12, or 16 bytes, but later versions of the SCSI standard also allow for variable-length CDBs. The CDB consists of a one-byte operation code followed by some command-specific parameters. The parameters need not be a full byte long, and the parameter length varies from one command to another. The available commands, with links to articles describing the detailed structure of many of them, are listed in the article section List of SCSI commands.
Typical CDB structures, for the 6- and 16-byte SCSI Request Sense Command, opcode 3, are:
6-byte CDB:
Bit Byte
|
7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
|---|---|---|---|---|---|---|---|---|
| 0 | Operation code = 03h | |||||||
| 1 | LUN | Reserved | ||||||
| 2 | Reserved | |||||||
| 3 | Reserved | |||||||
| 4 | Allocation length | |||||||
| 5 | Control | |||||||
16-byte CDB:
Bit Byte
|
7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
|---|---|---|---|---|---|---|---|---|
| 0 | Operation code = 03h | |||||||
| 1 | LUN | Service Action | ||||||
| 2 | Logical Block (MSB) | |||||||
| 3 | ||||||||
| 4 | ||||||||
| 5 | Logical Block (LSB) | |||||||
| 6 | Addition CBP information | |||||||
| 7 | Addition CBP information | |||||||
| 8 | Addition CBP information | |||||||
| 9 | Addition CBP information | |||||||
| 10 | Allocation length (MSB) | |||||||
| 11 | ||||||||
| 12 | ||||||||
| 13 | Allocation length (LSB) | |||||||
| 14 | Misc. CDB data | |||||||
| 15 | Control | |||||||
An example with different allocation of bits to parameters is the 6-byte SCSI Mode Sense Command:[1]
Bit Byte
|
7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
|---|---|---|---|---|---|---|---|---|
| 0 | Operation code = 1Ah | |||||||
| 1 | LUN | Reserved | DBD | Reserved | ||||
| 2 | PC | Page code | ||||||
| 3 | Reserved | |||||||
| 4 | Allocation length | |||||||
| 5 | Control | |||||||
The generic form of the 12-byte CDB is:
Bit Byte
|
7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
|---|---|---|---|---|---|---|---|---|
| 0 | Operation code | |||||||
| 1 | miscellaneous CDB information | SERVICE ACTION (if required) | ||||||
| 2 | Logical Block (MSB) | |||||||
| 3 | ||||||||
| 4 | ||||||||
| 5 | ||||||||
| 6 | TRANSFER LENGTH (if required) | |||||||
| 7 | PARAMETER LIST LENGTH (if required) | |||||||
| 8 | ALLOCATION LENGTH (if required) | |||||||
| 9 | ||||||||
| 10 | miscellaneous CDB information | |||||||
| 11 | CONTROL | |||||||
See SPC-4 (http://www.t10.org/cgi-bin/ac.pl?t=f&f=spc4r34.pdf, free registration required) for more information.
Notes
- ↑ SCSI Command Reference, pp.97-100.
See also
References
- SCSI Command Reference Manual, Seagate Corp, October 2016.
 | This computer hardware article is a stub. You can help EverybodyWiki by expanding it. |
This article "SCSI CDB" is from Wikipedia. The list of its authors can be seen in its historical and/or the page Edithistory:SCSI CDB. Articles copied from Draft Namespace on Wikipedia could be seen on the Draft Namespace of Wikipedia and not main one.
