SCSI log pages
From EverybodyWiki Bios & Wiki
SCSI target devices provide a number of SCSI log pages. These can be interrogated by a Log Sense command and, in some cases, can be set by a Log Select command. The Log Sense and Log Select commands include a 6-bit address field, allowing for 64 possible log pages. There is a standard map of log page addresses below. Note that any given SCSI device type will only support a subset of these log pages.
- 00h - supported log pages
- 01h - buffer over-run/under-run
- 02h - error counter (write)
- 03h - error counter (read)
- 04h - error counter (read reverse)
- 05h - error counter (verify)
- 06h - non-medium error
- 07h - last n error events
- 08h–2Fh - reserved
- 30h–3Eh - vendor-specific
- 3Fh - reserved
 | This computer hardware article is a stub. You can help EverybodyWiki by expanding it. |
This article "SCSI log pages" is from Wikipedia. The list of its authors can be seen in its historical and/or the page Edithistory:SCSI log pages. Articles copied from Draft Namespace on Wikipedia could be seen on the Draft Namespace of Wikipedia and not main one.
