Skyrunner Booster
| Booster | |
|---|---|
| Role | |
| Manufacturer | Skyrunner Paramotor Laboratory |
| Introduction | 1996 |
| Status | Production completed |
The Skyrunner Booster is a Russian paramotor that was designed and produced by Skyrunner Paramotor Laboratory of Pskov for powered paragliding. Now out of production, when it was available the aircraft was supplied complete and ready-to-fly.[1]
Design and development
The Booster was designed to comply with the US FAR 103 Ultralight Vehicles rules as well as European regulations. It features a paraglider-style wing, single-place accommodation and a single 26 hp (19 kW) Simonini Racing engine in pusher configuration with a 2.38:1 ratio reduction drive and a 125 cm (49 in) diameter two-bladed wooden propeller. The fuel tank capacity is 8.5 litres (1.9 imp gal; 2.2 US gal).[1]
As is the case with all paramotors, take-off and landing is accomplished by foot. Inflight steering is accomplished via handles that actuate the canopy brakes, creating roll and yaw.[1]
Specifications (Booster)
Data from Bertrand[1]
General characteristics
- Crew: one
- Empty weight: 23 kg (51 lb)
- Fuel capacity: 8.5 litres (1.9 imp gal; 2.2 US gal)
- Powerplant: 1 × Simonini Racing single cylinder, two-stroke, air-cooled aircraft engine, with a 2.38:1 reduction drive, 19 kW (26 hp)
- Propellers: 2-bladed wooden, fixed pitch, 1.25 m (4 ft 1 in) diameter
References
This article "Skyrunner Booster" is from Wikipedia. The list of its authors can be seen in its historical and/or the page Edithistory:Skyrunner Booster. Articles copied from Draft Namespace on Wikipedia could be seen on the Draft Namespace of Wikipedia and not main one.
