Additive Manufacturing Evaporative Casting (AMEC)

Additive Manufacturing Evaporative Casting (AMEC) is an innovative metal manufacturing process that combines 3D printing technology with lost foam casting techniques. Developed in the early 2020s, AMEC aims to address limitations of traditional metal additive manufacturing while leveraging the benefits of casting processes for small to medium production runs.

Background

AMEC uses 3D printed polymer patterns that are vaporized during the casting process, allowing for the creation of complex metal parts without the need for expensive tooling or specialized metal powders. This approach offers potential solutions to challenges in metal additive manufacturing, such as high costs and material constraints. The process has the potential to revolutionize rapid prototyping and small-batch production in various industries, including aerospace and automotive manufacturing. By combining the flexibility of 3D printing with the efficiency of lost foam casting, AMEC aims to provide a cost-effective method for producing complex metal parts in smaller quantities.

Process

The AMEC process combines 3D printing and lost foam casting techniques through the following key steps:

• 3D Printing: A hollow pattern of the desired part is 3D printed using a low-cost polymer, typically PLA (Polylactic Acid).
• Preparation: The 3D printed pattern is attached to a foam gating system and coated with a thin ceramic layer.
• Packing: The coated pattern is placed in a flask and surrounded by ceramic beads or sand for support.
• Casting: Molten metal is poured into the flask, vaporizing the polymer pattern and filling the void to create the metal part.
• Cooling and Extraction: After cooling, the metal part is removed from the flask and finished as needed.

Advantages

AMEC offers several potential advantages over traditional metal additive manufacturing and casting processes:

• Cost-effectiveness: By eliminating the need for expensive metal powders and specialized 3D printing equipment, AMEC can potentially reduce production costs.
• Material versatility: The process has been demonstrated to work with various metals, including aluminum, brass, iron, and steel alloys.
• Improved material properties: Unlike some metal 3D printing processes that can affect material strength or introduce porosity, AMEC produces parts with conventional cast microstructures.
• Complex geometries: AMEC allows for the creation of intricate shapes and internal features that may be challenging with traditional casting methods.
• Reduced lead times: For small to medium production runs, AMEC can potentially offer faster turnaround times compared to traditional tooling-based processes.
• Sustainability: The process enables efficient use of materials and can incorporate recycled metal scrap.

Limitations and Challenges

Despite its advantages, AMEC faces several challenges:

• Size limitations: The current standard AMEC system is limited to parts within a 3D print bed, which may not be suitable for larger components.
• Surface finish: The surface quality of AMEC parts may not match that of traditionally machined components or some high-resolution metal 3D printing processes, potentially requiring additional finishing steps.
• Production speed: For high-volume production, traditional casting methods with permanent molds may still be faster and more cost-effective.
• Process control: Ensuring consistent quality across different part geometries and materials may require careful process control and optimization.
• Industry adoption: As a relatively new technology, AMEC may face challenges in gaining widespread adoption in industries with well-established manufacturing processes.

Applications

AMEC is primarily targeted at small to medium volume production runs, prototyping, and the manufacture of obsolete or maintenance, repair, and operations (MRO) parts. The technology is being developed for potential applications in various industries, including defense, aerospace, automotive, and medical device manufacturing. It may be particularly useful for producing complex, customized parts or for situations where traditional tooling costs would be prohibitive.

Commercialization

As of 2024, Skuld LLC offers the AMEC technology through a system called Lightning Metal 16, which automates or simplifies various steps of the process. The standard system is designed for parts with dimensions up to a seven-inch cube and weighing less than 10 pounds, though larger configurations are possible. As of 2024, Skuld LLC offers the AMEC technology through a system called Lightning Metal 16, which automates or simplifies various steps of the process. The standard system is designed for parts with dimensions up to a seven-inch cube and weighing less than 10 pounds, though larger configurations are possible. While Skuld LLC is at the forefront of AMEC technology, other companies and research institutions are also exploring similar additive manufacturing and casting hybrid processes. It's important to note that while AMEC shows promise, it is a relatively new technology, and its long-term impact on the manufacturing industry remains to be seen.

See also

• Lost-foam casting
• 3D printing
• Metal casting

References

This article "Additive Manufacturing Evaporative Casting (AMEC)" is from Wikipedia. The list of its authors can be seen in its historical and/or the page Edithistory:Additive Manufacturing Evaporative Casting (AMEC). Articles copied from Draft Namespace on Wikipedia could be seen on the Draft Namespace of Wikipedia and not main one.

📰 Article(s) of the same category(ies)

• Prusa XL
• Advanced manufacturing
• 3D-printed stethoscope
• Plessey Semiconductors Ltd
• CKD Corporation
• Diono
• Q3d

---